Search results for query: *

A few days ago I noticed my high beams aren't working properly. If I have the low beams on and flash/turn on my high beams, the lights cut off completely. If low beams are off and I flash the highs, nothing comes on. The bulbs are upgraded halogens from LMR, they've been in for about a year...

SOLD! Info from BMR's site: http://www.bmrsuspension.com/?page=products&productid=1565&superpro=0

I'm installing a Barton shifter and rear bracket on my 2012, somehow the two 10mm bolts that affix the rear bracket have gotten lost in the depths of my car. Ford parts department was useless ("my fancy compooter don't give me sizes, just part numbers") I went to the parts store and hoped to get...

I recently overhauled the suspension on my '12 GT. SVE springs, factory struts, and GT500 mounts - all brand new. I got everything installed and aligned about 1,500 miles ago and the car recently started making an intermittent popping noise. I'm well aware that this is a common issue on a stock...

Pretty neat, but good god that's a lot of doll hairs on top of a 5.0. http://www.motorauthority.com/news/1098749_2015-ford-shelby-super-snake-slithers-forth-with-over-750-horsepower

Putting my relo brackets, LCAs, and panhard bar on. Had a helluva time with the bracket, now the rear hole of the LCA won't come close to lining up with any of the relo holes. I'm doing this install solo, muscling it in isn't much of an option. Suggestions?

I ordered a set of wheels and tires from a vendor on here, there are some surface imperfections from the cardboard rubbing on the face of the wheel. It looks like the majority of the damage can buff out, so I'm going to give that a shot. Gloss black painted finish. Any particular...

Looking for something different than Drifts or Bullets. Prefer a staggered setup, but I'm open to any color/finish. Forgestar CF10s in black are at the top of my list, to give an idea what I've got in mind if I buy new. Give me a price shipped to a business address, zip code 84119 (Salt Lake...

Looks like LateModel has the best price on this. Anyone got a used valance, or maybe another vendor can do better than LMR? I'd prefer the full kit with fogs, but they're not required. Shipped to 84095, I have a business address to save a few bucks.

Yep. Mufflers, sell me some for cheap, bitches. Shipped to 84095. Hoping to stay in the $150-$200 range. Will also consider other axleback setups.

Hey guys, finally looking to get back into a Mustang. Hoping for something relatively close to Salt Lake, 2011/2012. No convertibles. Trying to stay around $24k or so, but that's not necessarily a firm number. 6spd is a must, no black cars. I'm not racist. Let me know what you've got!

I'm not quite ready to pull the trigger on anything just yet, too much snow on the ground to enjoy a Mustang, but I want to get the search started. Budget will likely be around $22k-$24k, so I don't mind something with a few miles on it. A bolt-on car, not too picky on color, would be perfect...

A good friend of mine wanted to get some shots of the Terminator, I thought you guys would like to see. Check her other work out here.

Just picked this baby up today, headed home from St. Louis with her now. Details when I get home.

Well, it looks like my roommate and I will be packing up and moving to the Austin area at the end of May. We're looking for housing suggestions, good/bad areas of town, things to do, gainful employment, friends to hang out with, etc. I couldn't be more excited to start my new life there, we just...

So, I've been messing around a bit tonight with some custom emblem possibilities for you guys. I made a clover for irishpwr46 and decided to see what else I could come up with. Here are a few pictures, let me know what you think, if there'd be interest in getting these made...

As the title states, I'm looking for a cheap/free rear emblem and a set of GT emblems. I'm looking into making some billet badges, and I'd like a physical part to take a set of calipers to. If anyone has anything sitting around, let me know!

I'm getting ready to install my return fuel system and I've been reading up on people having issues with fuel getting too hot with a return setup. I plan to run E85, but I'm not absolutely certain at this point, so I'd like to do it right from the beginning. Are there better, easier ways of...

I purchased this a while back, thinking I would use it for school, but I used it once and decided I preferred my laptop. It's just your basic Nook Color tablet, but I added an 8gb N2A card to it, so it runs just like any Android OS phone/tablet, but at a fraction of the cost. I'm looking to get...

This may be a long shot, but maybe someone on here can help me out. I've got an entire drivetrain that I'm looking to put into a clean New Edge. I want a fully wired car, complete interior, ready to be painted if necessary. No motor/trans/rear needed. I'm located in Little Rock, AR, but I can...

I'm looking to purchase my first in the near future, I'm looking mainly at the Magic Flight Launch Box. It seems that, for the money, that's the best piece, followed by the Pax by Ploom. I love the look of the Pax, but the fact that it's twice as expensive as the MFLB turns me off. So, anyone...

Comp CT4 7068. Sold! TiAL Q BOV. Sold! TiAL MV-S 38mm wastegate. Black, comes with all flanges/hardware. $250 shipped. HPX MAF. Never used, slot-style MAF. $200 shipped. Siemens Deka 80# injectors. These are an EV1 style injector, but I have the harnesses to adapt them to EV6. $300...

Used for about 3 months, this was a great unit! Navigation, Bluetooth, etc. Check this link for more information. Does not come with wiring, HEAD UNIT ONLY. $250 shipped OBO.

I'm needing A-Arms: TZM-A-ARM And CC plates: TZM-CCP-94-04 Note, these parts are for '99-'04 GT's.

Very interesting concepts, methinks. 7Zu7GVfx6Ng