air conditioning

  1. L

    No Power To A/C Compressor Clutch

    Please help, I am losing my mind. A/C doesnt work. Cycling switch was bad, so I swapped it. Forscan showing that all sensors are good and that the clutch is allowed. I am getting no power to the compressor clutch. I swapped relays and checked all fuses. I checked for continuity of the harness at...
  2. J

    HELP!! Air doesn’t blow hot or cold after the outside temp reaches above 70

    I’ve had this mustang for 2 years now. When I first bought it, it only blew air from the defrost vents and no where else, I ended up replacing all the blend doors to fix that issue, ac ran fine. I drove from TN to WA and I was in Colorado when my car started to overheat and my ac blew hot, the...
  3. A

    AC Compressor bolt size?

    I recently bought a 2011 V6 and discovered that someone previously worked on the car and left my AC compressor’s hardware missing and backing out, so I need to pick up some new bolts. Does anyone know the size, pitch, and length of the bolts? I’d much rather pick new hardware up at a hardware...
  4. J

    No power to A/C controls after battery reconnect.

    So I changed the blend door actuator on my 07 mustang. It was the one behind the dash on the upper end. I disconnected the battery(negative terminal), then passenger air bag...removed it. Then on to the actuator replacement. Reversed everything in that exact order. Started the car, and no power...
  5. RoushTang11

    HVAC - Does anyone know where this is?

    I saw on another thread that someone was having HVAC issues similar to me. They bought an Air conditioner pressure transducer (part# mt3500) which solved their issue. I know, I know. I shouldn't just throw parts at it - but I figured it was cheap enough to try. However, I can't find where it...
  6. Ryan D

    Connecting different style compressor to factory A/C lines

    Really would like to make my A/C work out on this drag week project. Sanden SD7B10 Mini compressor was my only option to fit my setup on this LS swap into an '08 GT. Have the fitting coming today to adapt the compressor flange to o-ring style fittings. Problem is, I need to either go 90*...

Latest posts

Support us!

Support Us - Become A Supporting Member Today!

Click Here For Details

Back
Top