Brembo Cross Over Part?

[Tungsten_GT]

Found a set of 4 piston brembos at a junk yard for a friend, but one of the cross over pipes is a little bent. No leaking though. Does anyone know what the replacement part number is? If there is one

 

[drive_55_not]

Pre-made ones,

http://www.racingbrake.com/Crossover-Tubes-1-each-left-1-each-right-EVO-p/bm41-01.htm

You could get a straight line from any of the parts stores and bend it to fit but to make pretty bends, you'd need a tubing bender so it's probably easier to buy the made ones ...

.

 

[Tungsten_GT]

These fit the mustang caliper like the originals?

 

[oldVOR]

If the tube isn't bent to bad or kinked/creased, remove it and straighten it out.

However, those tubes are run in a shallow channel on the caliper for support so, you have to ask how it got bent and what else might have happened to the caliper in the process.