Unique Wheel Setups on Mustangs...

[fivehunsky]

okay.. so.. here goes

enkie rpo3 on the back in 18x10 plus 18 I think

ignore the horrible offsets.. I had to run some rediculous spacers because the center bores were too small and there were no reliefs in the back of the wheels.. but,
forgeline rs 17x8.5 -10 (with spacer) 17x10-5 (with spacer and a 315 tire lol)

rota boost 18x10 plus 20 or so rear 18x9 (with an inch and a half spacer as well.. so, more like -10 or something like that) also, -3 degrees of camber

banana... mmmmmm

xxr 522 in 18x8.5 plus 35 (and a 1.5 inch spacer under it) up front and advan rz out back.. cant remember size lol

mb battles 17x9.5 plus 15 all the way around.. back when it was the wifey's daily 255 rubber all around as well

next to her old daily.. 1974 datsun b210 also, those mb's are bronze.. we tried both colors

wizard driver

hellaflush

I have had a bunch of stuff on the car.. I was looking for my rpf1 pics but I cant find them.. ah well

 

[filtercharger]

I really like the oldschool look of these! so far, they only make them in 18s, I'm trying to have them made in 19s, they are called Mesh Zero by Kyowa Designs

If not available in 19s, here is my second choice, TSW Carthage.

 

[Black_GT]

^great looking wheel. Looks hard as hell to keep clean tho.

 

[retfr8flyr]

I don't know if they are considered unique but these are ZE Boost style wheels 18x9 front, 18x10 rear.

Earl

 

[Kuro!]

As much as we disagree on things Earl, I think your car's stance is badass.

 

[tjm73]

I don't know if they are considered unique but these are ZE Boost style wheels 18x9 front, 18x10 rear.

Earl

I like these.

 

[TrickyP]

I haven't seen too many 05-09 GTs with the 19" Brembo wheels from the 2011-12 GT models:

 

[Xporter]

Those look good tricky, any more angle shots?

 

[TrickyP]

I'll take a few more shots tomorrow before I take apart the rear (stupid UCA bushing).

 

[LBSRACING]

They are not really unique per say but you don't see many(I haven't seen another one in person yet) S197's with 17x3.5 Magnum's and 15x10 325/50/15 rears.

Ok why are these so freaking small. The sig pic isn't small and they were taken the same day errrrrrr.

 

[Stang613]

DAAMN, you took my idea! Good show, looks wicked.

 

[TrickyP]

Just a few more...nothing fancy. I'm spent after a day of replacing my UCA bushing.

 

[Kuro!]

Need some spacers in the rear...

 

[TrickyP]

Need some spacers in the rear...

What size?

 

[Kuro!]

Unless you want to go with longer studs, I would just run a 10mm spacer. Make the rears more flush with the fender.

 

[CHAD]

Sparco wheels

Sparco 17x8 fronts 17x9 rears

225-50-17 fronts
275-40-17 rears

I know it needs to be lowered. Do you think roush 1" springs in rear would level it out. I don't want to lower the front roads aroUnd here are horrible.

Chad

 

[Daniel Day]

I haven't seen too many 05-09 GTs with the 19" Brembo wheels from the 2011-12 GT models:

Wow, that looks really good, especially on silver. Great choice man. And I think spacers would look good out back but I also think it looks fine without.

 

[Seer]

I'm a wheel newbie, how would these fit in the rear with a 285, 18x9.5 with a +35mm offset:
http://www.nlmotoring.com/XXR-962-Wheels-18x9-5-Gun-Metal-p/96289789.htm

and these in the front with a 255, 18x8.5 with a +35mm offset?
http://www.nlmotoring.com/XXR-962-Wheels-18x8-5-Gun-Metal-p/96288789.htm

Also what size hub ring?

 

[MikuhlBrian]

New to the board... here's a unique set up, haven't seen this on another car yet. 2011 19" GT premium wheels on a 2006 convertible.

 

[tjm73]

New to the board... here's a unique set up, haven't seen this on another car yet. 2011 19" GT premium wheels on a 2006 convertible.

Local guy I know did those wheels on his '05 'vert. Looks good.

What wing is that? Is it an OE style Shelby wing?