Search results for query: *

i did a search but couldn't find anything. i have a chance to buy some hub centric wheel spacers really cheap i want to know if they will work on my mustang. they have 66.1 mm center hubs. i am no where near my extra wheels or axles to measure them so i ask here. my question is what is the...

i would order at least 2 sets for extras. i like the 05-09 much more than the 10 and up cars. i plan on owning one until i can't drive any more.

ome people are bugging me to post this so i finally was able to get some pics of my 08 bullitt mustang. i have been modifying it for 3 years with a LOT of GT500 pars so i call it project Bullitt 500. maybe what would happen if you cross breed a 08 Bullitt with a GT500 mustang. the mods i have...

i have a 100% genuine Shelby GT500 paperweight conversation piece. it a messed up piston from a motor that spit a rod thru the block. the motor was in a 07 GT500 running a whipple 2.9 and pushing 20lbs boost. i think it made almost 900rwhp. it got a bad batch of gas and that was the end. piston...

i have a alloy block out of a 08 GT. from the info i have received about it it spun a rod bearing. it has no crank and the main caps are no where to be found. it's just a bare block. i have some main caps from a 03 mach 1 block laying around. will the main caps from a 03 mach 1 block work in...

i have a LOT of parts laying around that i have no use for any more. ALL PRICES ARE PICKED UP IN NEW BERLIN WI 53146 zip. i live 1 mile off I-43 and racine ave exit. NO I WILL NOT SHIP. selling parts CHEAP and will be worth your time to pick the parts up...

i will be installing new wheels and tires shortly for my 08 bullitt mustang. witch sensors are better? band style or valve stem style and why? thanks for the replies in advance?

i am installing a modified GT500 hood on my 08 bullitt mustang. i have welded the windshield washer holes shut, cut out openings for trakspec hood vents and cut and modified the hood to install aerocatch hood pins where the outer stops are. my question is should i weld in the part that rises in...

i am looking for several sets of silverhorse racing lower grill inserts. they look nice but they fell out easily so they fell out of favor and they don't sell anymore. silverhorse no longer makes them and don't have plans on making any more. this is what i am looking for. if you have any...

anybody have a coupon code for silverhorse racing? or do they give a site discount? i plan on ordering flush mount 1/4 louvers and saving a few $$$ would be cool. also i see they no longer list the lower grill inserts. anybody have some laying around or know how to buy some?

i have a odd question on crankshaft fitment. maybe someone here can answer it. i have a NEW cammer block, pn # M-6010-t50. i also have 3 stock GT500 crankshafts, 1 07 crank, 1 08 crank and 1 2011 crank. is it even possible to use a 5.4 gt500 crank in a 4.6 block? my guess is the crank would...

i have a NEW cammer ALLOY block for sale. they cost over 5K new and have been discontinued for a LONG time. this is the ultimate NA block for modular fords. The "Cammer" 5.0L block is the foundation of Ford Racing's road racing success. Competing in both Grand-Am's Daytona Prototype and the FIA...

i have a NEW ford 8.8 cover for boss 302 cars. it has a part # dr3w-4a028-cb cast into the cover. NO bolts or gasket, just the cover. selling for $100 shipped in the lower 48 states. pm me here or email me [email protected] i also have a few GT500 hood vents for sale contact me for details in...

i am laying the groundwork to start a big cube motor build. i have a extra set of extremely low miles take off 08 heads to be ported. who would you send them to for a stage 3 cnc port job with bigger valves installed. i don't mind spending $$$ for quality work, i just don't like wasting $$$.

as title states looking to buy a 5.4 alloy block from a GT500 for my next build. can be the earlier ones with sleeves or the later ones with plasma coatings doesn't matter block will be sleeved to bigger bore. i need the BLOCK and main caps nothing else. block can have cylinder wall damage, as...

i want to make the center lower grill opening larger in my front bumper. because ford chargers a core on old bumpers my connections don't have any. i am looking to buy the center section of the lower bumper. basically i need 1" all the way around the lower grill opening. on the bottom just cut...

i am finishing up my 2013 track pack 6060 trans swap in my 08 bullitt mustang. have everything together including the reverse lockout module which works perfectly. i have no speedo. any ideas why? i double checked all of my connections and no pinched wires that i can see. a friend will put a...

i have a SFI certified 8 bolt flywheel for 8 bolt crank mod motors. been on the shelf for a while so i don't remember who made it. has some bluing, NO CRACKS, so it might need a re-surface. has the clutch guide pins in it. $50 picked up in new berlin wi. am selling more parts cheap in other...

i have a PAIR of good usable lower control arms off a 08 GT500. don't remember how many miles i have on them. they have been on the shelf for a few years. the rubber bushings are still in good shape. $30 picked up in new berlin wi.. am selling more parts in other threads cheap. will be...

CALIPERS AND MOUNT BRACKETS SOLD rotors still available $50 i have a USED set of low miles front brake calipers with lines and drilled and slotted rotors. i had the pads but somehow 1 set got misplaced when moving them around. nothing wrong with them i just upgraded my front brakes...

i have a new never used Boss 302 strut tower brace. $50 picked up in new berlin wi. i am selling more parts cheap in other threads. will be worth the drive to pick up and save $$$.

i have a nice PAIR of 05-09 GT500 mufflers. their are no dents in the body. the tips could use a polish but are in good condition. $75 picked up in new berlin wi. i am selling more parts cheap. will be worth the drive to save a few $$$.

i have a COMPLETE NEW IN BOXES S197 mustang brake upgrade kit. i have NEW Brembo 4 piston calipers for 07-09 Gt500's, NEW Ford 14" rear brake rotor adapter brackets for 13 and up GT500's, NEW Stop-tech braided front and rear lines, Hawk performance ceramic brake pads, and Stop-tech drilled 14"...

i have the stock BLACK with white thread seat covers from a 2011 mustang GT. this is a complete SET of seat covers, both front seat upper and lower covers, rear bottom, 2 rear backs and 4 head rest covers. was told from the person i got them from they were removed from a car with less than 300...

i hope i put this in the correct section in my mind this is tech. if not i will apologize in advance. i purchased a motive power bleeder with the ford 3 prong adapter # 0107. i went to use it and the adapter is larger than the cap so it won't work. the bleeder adapter screws right on my ford...