Search results for query: *

2007 Mustang GT Premium - ONE OWNER GARAGE KEPT SUMMER DRIVEN ORIGINAL EQUIPMENT: Alloy Gray Paint / Dove & Black Leather Interior 4.6 Liter 24 valve engine / 5 speed manual transmission Interior Upgrade Package Premier Interior Trim 18" Premium Wheels 3.55 Limited Slip Axle Rolled Exhaust Tips...

Picked her up last night!!! 2013 Taurus SHO with Performance Package in Tuxedo Black and Mayan Gray interior inserts. Anderson Ford in Rockford, IL was awesome! I was in and out of there in less than an hour, after dealing with their finance guy on the phone in regards to loan rates...

Hey guys, I'm going to replace my driveshaft U-joint(s) because I have some pretty noticeable clunking in and out of gears. I have a Powerhouse 4" aluminum driveshaft and I would like to find the part(s) I need before I drop the shaft. Does anyone know if it's a Spicer 1330 like the one in...

I've been having a slightly noticeable gear whine with my 4.10's, which were installed "professionally" over a year ago, mostly on decel, at slower speeds. So, I pulled the cover and had a look. My local mechanic friend thinks the pinion is too deep and the contact pattern is too far into the...

Brand new in box opened only to take a picture. Asking $250. Sorry my cell phone camera flash wiped out the piece of paper with my name on it. Location: Amboy, Illinois 100 miles west of Chicago. Will ship at buyers expense. Will throw in Embalming fluid bottle if desired...

Does anyone have a link to the install and tuning instructions for this manifold? I cannot find any such thing on their website. Or, could someone scan a copy of them for me? I got one used and didn't get the instructions.

So I was driving home from Springfield, Illinois tonight, with my wife following me, and all of a sudden, the car just nosed over. The engine didn't stop, but pressing the pedal to the floor got me nowhere fast and my wideband pegged full lean. Shortly thereafter, the wrench light came on and...

My previous problem was resolved after I found 2 cracks in the stock intake and replaced it. I had air getting in under vacuum and it was skewing the fuel trims. So, after replacing the intake, and also my primary O2's, I'm now having an issue where my cruising air fuel ratio is hovering...

Hey guys, I noticed the other day while lying under the car there was grease slung all around where my driveshaft boot is, directly below the shifter. Can new boots be purchased somewhere? Am I better off just taking it back to the D/S place and having them fix it?

I got stranded in Chicago last weekend, car drove fine 100 miles to the city then wouldn't turn over. We push started it and it drove fine all the way home. I first suspected my 4 y/o battery so I left it on the charger overnight and my charger reported back "unable to charge." So I replaced...

Sell me your wheels with good rubber for $1000 or worn out rubber for $800. I'm open to making an offer, as well.

I've been fighting an intermittent lean issue mainly on decel in a higher gear. I've been told by tuners that my datalogs indicate a vacuum leak. I decided to pull the intake for a closer look. I spray a 100 wet shot, so I'm not doubting that there's an issue here. You can see in the 1st pic...

Got these Russell SS lines + brackets, a direct bolt in from JEGS for $120 shipped and installed them. I needed to bleed my brakes, the fluid was bladder infection brown.

I have a good friend that out himself through college doing car audio, so installation for him was a snap. I got the Metra Double Din install kit (95-5812), the PAC C2R-FRD1 wiring harness, the Absolute...

My cd changer crapped out on me, so I had to disassemble the unit in order to retrieve my CDs. So I'm looking to upgrade to the aftermarket. I don't need DVD or nav, I have an iPad for video and gps directions. I would like mp3 capable, maybe an aux USB port for a flash drive? Any...

I currently have 4 CDs stuck in my head unit. I was loading a fifth, and it got stuck halfway in followed by a loud grinding sound. Now, I cannot play, load, or eject any CDs. Has anyone encountered this issue? What is the possible fix?

Alright guys, I need to datalog some parameters along with A/F ratio. I know how to datalog, but I cannot figure out how to connect the XCal2 to the analog outs from the wideband. There are a few websites out there explaining that it needs to be done, like this one...

While cruising, usually at low RPM in 4th or 5th gear, my car will nose down a bit and my A/F will jump from 14.x to 18-21. This will usually only last a second or two, and a bit of throttle will make it go away. Obviously, this is telling me I have a vacuum leak and somehow unmetered air is...

We traveled over 1900 miles from west of Chicago through Cleveland to Washington D.C. for a few days of taking in the sights at our nation's capital. I LOVE this car!!! Got a few cool pics to share: Jefferson and Washington Monuments in the background. I consider the Flex to be a MAXI-mini...

Mine is FUBARED so I need a housing quick.

I currently have the VVME kit from Ebay installed in my Mustang @ 6000K, and I've already replaced the ballast on the passenger side once since December of 2008. Also, the wiring wasn't plug and play and I had some corrosion in one of the connectors that did plug in. Yesterday, when locking...

Next week I plan to remove the rear end, disassemble it, have a friend powdercoat it then do a full rebuild with 4.10's and new clutches/bearings/seals/girdle. Are there any tricks I should know about when removing the axle, or in disassembling it to go to the powdercoater?

$50 plus shipping. Bought it from a forum member and found out it won't work with my custom exhaust setup with X pipe.

Well tonight I found out the Pypes X that I have is not compatible with the BMR safety loop. For those with an X, what driveshaft safety loop are you using?

I've had these MAC longtubes for a couple years now and they are starting to worry me. I'm also hearing a bit of an exhaust leak where the coating has flaked off at the collector. Anyone else have ceramic coated headers that look like this?