Search results for query: *

  • Users: monk36
  • Content: Threads
  • Order by date
  1. M

    Fair Value for the Selling the Stang?

    Hey all, unfortunately times and circumstances are dictating that I'm looking at selling the stang. I could really use the money, and simply don't have the time to enjoy it or take care of the little issues that crop up from time to time with heavily modded cars. I don't need money ASAP so...
  2. M

    It's still raining... inside my car

    Ok, so let me preface this by saying I already thought I fixed this twice, the first time being a window rollup reset, then the infamous passenger side grommet near the cabin air filter, which I totally removed. Well, it rained today and I'm still getting water inside the car, under the dash...
  3. M

    Alienware M11X r1 Netbook

    The specs on it are - Intel 1.3GHz Core 2 Duo @1066 MHz, 4 GB ram, 64 bit Windows 7, Dual switchable graphics card (Intel Integrated 4500MHD & Nvidia GeForce GT335M), 11.6" HD+ 1366x768 screen, 1.3 megapixel front camera for vid chat, integrated bluetooth, 10/100 Mbps Ethernet, 3 in 1 media card...
  4. M

    SALE: many parts, aftermarket and stock; inj, exh, etc

    SALE: stock mufflers, phb, manifolds, shifter, fuel pump I am located in Tyler, TX. I will be willing to drive to meet for some items, but not more than a couple of hours. Prices do not include shipping, which is the buyers responsibility to pay. I will be responsible for seller paypal fees...
  5. M

    Loosing my cool- very high intake temps

    Yesterday I went in for a dynotune on my built motor. This techco blower runs very hot and I need to get my intake temps down. Unfortunately I didn't finish getting tuned because I showed up with bad gas, so they couldn't put all the timing in. I will be going back, but i want to address the...
  6. M

    What will it make?

    Looking for hp guesses on my new setup. I should be getting it tuned in a couple of weeks. The parts list is as follows: Manley pistons, about 9.1:1 compression eagle rods stock stroke eagle crank 39 lb injectors dual frpp pumps 3:55 gears stage 3 spec clutch Spec steel flywheel otherwise...
  7. M

    Has anyone done a driver's side fender well intake?

    Like the title says, I'm wondering if a driver's side fender well intake has been done here. There are a couple of places I've seen it done elsewhere but with few details or beneficial claims. Kenne bell seems to tout their passenger side intake as a huge advantage over competing blower designs...
  8. M

    WTT: 05-09 Borla Stinger Catback for Corsas and stock overaxles

    Like I said, I'm wanting to trade my borla Catback (not their axleback) for a set of corsas with the stock overaxles. I would prefer the Corsa extremes, though I will consider the sports or the tourings. This would be a straight trade, although this is a marketplace, so I am reasonably open to...
  9. M

    Rebuild Build Thread

    Blah blah blah
  10. M

    Looking for other opinions on DD's

    Not if they're too big or too small. I will be conducting my own set of experiments to determine that. I'm talking about my daily driver, as shown in the sig. It's always been my DD and I cannot afford to have anything other than a DD at all right now. Of course, what started as, I'll only put...
  11. M

    P0345 P0349 Codes

    Before, I start, I will say that back when I first started having the codes, I checked around, and found that they usually mean that the alternator needs replacing. Here's the thing : My car's been throwing the codes since earlier this year. After having the cam position sensors checked...
  12. M

    P0345 P0349 Codes

    Wrong section please delete
  13. M

    Bucking/Hesitation Problem...Cause?

    Lately, I've been experiencing a bucking or extreme hesitation problem. When this occurs, the gas pedal goes limp for an instant, the engine almost sounds like it stops turning, and there is an abrupt stop to exhaust noise. This all lasts for roughly a quarter of a second, then drives like...
  14. M

    Sound proofing interior

    I'm planning on putting some sort of sound deadening material down, probably dynamat extreme, on the interior including doors, floor, roof, and trunk. Ya ya, it will add some weight, but I could really care less. I can't get enough traction anyway, and it's my daily. My question is, for the...
  15. M

    Agent Forty Seven Grill

    I just wanted to take a second to tell everyone, if you didn't know, that agent forty seven is a stand up company. I have had one of their grills on my car for a while now. When I put the grill on, I noticed a very slight bend in the middle at the bottom. It could only be seen if you looked at...
  16. M

    Aluminator shortblock pricing

    Where would be the best place to go for the aluminator shortblock pricing wise? M-6009-A463SC. I searched the site, and couldn't really find anything definitive and I'm in a little bit of a time crunch. Thanks.
  17. M

    P0345 code

    This code, for camshaft position A ckt keeps coming up and I'm not sure what the problem is. I had the sensors checked and they were ok. What is the cause of the sensor going off? Anything to be really concerned with?
  18. M

    Rough Idle. Please Help!

    Hey my mods are listed in the sig. I have been driving the car fine with no signs of wear, and tonight, out of the blue, I drove it home, and as I got closer to home, it started idling like I had a cam in it. I have no idea what it is, or what to do. There are no good performance shops within...
  19. M

    11 inch wheel clearance

    I have some 1.25 inch spacers. If I have my wheels widened inward to a total of 11 inches, will I have any clearance problems? I've measured and it doesn't seem like I will, but am I forgetting anything? Also, a 335 nitto would be appropriate, correct?
  20. M

    T3650 Throw-out Bearing?

    Any body know if there is a place to get a throw out bearing besides the stealership? I was quoted 270, I believe, for one from a local Ford. I think mine might be bad, after checking some explanations of symptoms on the web. The car is fine if I have the air conditioner off, but when I...
  21. M

    Spec stage 2 and Spec Alumn FW Installed

    I just got a Spec stage 2 and a Spec Aluminum Flywheel installed. I picked it up from the shop today, and it feels great! I'm really surprised that my stock clutch lasted this long, but I didn't realize at all how much power I was losing out of my failing stocker. Getting that power back...
  22. M

    Corsa Sport Axlebacks

    FS: Corsa Sport Axlebacks SOLD!
  23. M

    Reverse gear problem? Clutch?

    Recently, when I've put the car into reverse on a cold start and let off of the clutch, I get some grinding and the gear doesn't fully engage. This doesn't happen in any other gear, and I have never forced it into reverse at any speed. Is my reverse gear in the tranny wearing out? Clutch...
  24. M

    Techco supercharger installed and tuned

    Just got my setup from techco tuned. It's been done and running for a couple of weeks but I waited until I had solid numbers to post. The kit was great going on. It came with everything I needed except a gt500 fuel pump, which Tillman Speed hooked me up with, and H10 spark plugs, which HPP...
  25. M

    Hi! New Here!

    Hi, I am new to these forums and figured I would post up a hi message. I have had my 05 GT for a couple years, and couldn't love it more, at least, for a while. I have an MGW short shifter, BMR lowering package, Corsa Sport Axleback, CHE Upper and Lower control arms, Agent 47 Grill, JLT intake...

Latest posts

Support us!

Support Us - Become A Supporting Member Today!

Click Here For Details

Sponsor Links

Banner image
Back
Top