Search results for query: *

  1. killswitch06GT

    3v parts for sale pistons and coolant crossover

    Got a set of saleen/cp pistons. They are for 9:4:1 CR with 3.554 (.002 overbore). They were used in a build and swapped out for bigger bore pistons. They is scuffing on skirts and may need to be coated before using. Comes with wrist pins and rings. I bought these off of someone here a while back...
  2. killswitch06GT

    WTB stock intake and midpipe

    Looking to get a stock intake for 06 gt with stock maf sensor and also looking for a midpipe. Kind of in a rush with this one. plz lmk what yall got
  3. killswitch06GT

    P0355 help

    So I've been having misfire issues for a while and the car finally started throwing the P0355 cel. I looked it up and it supposed to be a bad coil on cylinder 5. I replaced the cop on cylinder 5(the front driver side) and I'm still throwing the code. I also measured the voltage going to the cop...
  4. killswitch06GT

    Quick question on3 wastegate

    Hey I've been reading and can't find any info. I have the red and big blue springs that came with the on3 kit and trying to fing out the psi rating of them. I'm trying to add 2psi and currently have in the yellow black iirc. Anyone? Sent from my LG-D800 using Tapatalk
  5. killswitch06GT

    misfire with no code WTF!?

    ive been chasing this issue for a week now and im running into a dead end. the car is throwing no codes but i KNOW its not running right. Ive read other threads and tried suggestions but nothings working for me. I put in new Ht0s last month, cleaned the throttle body and MAF 2 days ago, and ive...
  6. killswitch06GT

    New build need opinions

    Sup guys! Well back in 2012 I planned on doing a build using a teksid(couldn't find a current block) mmr h beams some cp pistons and a 8 bolt out of an 99 cobra. Long story short I ended up becoming a dad and overall lost interest in the build. On top of it all, the whole thing was a headache. I...
  7. killswitch06GT

    Need help figuring out issue

    So I have an 06 running a on3 kit tuned by lito. Ive just hit 110k on the stock engine and am running into issues. I first want to point out that ive been having idling issues for the past few months now where it sounds like I'm having a slight miss but I've never thrown a code and I've just...
  8. killswitch06GT

    3v heads and pistons

    Have a set of used 3v heads off an 06 that had about 60k iirc. They have already been resurfaced and ready to throw on. They have brand new TFS beehives (TFS-15410-24) installed with stock cams. Missing 3 followers and does not come with camshaft gears. also comes with stock valve springs Sold...
  9. killswitch06GT

    BOV stuck open?

    I have a on3 kit with the on3 wastegate and bov on it. I have the red and yellow springs in the wastegate which should be making around 8-9 psi. When i make full boost it only makes 5 psi! and it starts to drop off. When i am in boost i can hear my bov the whole time just letting air out. wtf...
  10. killswitch06GT

    Wtb forged pistonz

    Looking for a set of stock bore forged pistons. Im wanting a close to stock compression ratio. Lmk what you guys have Sent from my SAMSUNG-SGH-I747 using Tapatalk HD
  11. killswitch06GT

    Spark blowout?

    Ok so I have a on3 kit with the precision 6765 billet wheel on and im making about 8psi on this setup. Have autolite ht0 gapped .32 iirc. When I go wot the car "hiccups" for a brief moment and it seems to happen when I start to build boost. Does this sound like spark blow out? This may or mag...
  12. killswitch06GT

    Frpp 17x8 bullets

    SOLD
  13. killswitch06GT

    New slave but won't go into gear!

    Hey I ordered a OEM slave after my original one took a dump on me. At least I thought thy was the problem. The car would go into gear off but when running I could no get it to go in any gear. It sounded like symptoms of a bad slave to me. Well new slave is is now and it's doing exactly the same...
  14. killswitch06GT

    GT500 front conversion parts

    So i made the lunge and ordered the gt500 bumper from tousley. I only bought the bumper so far and was hoping to pick up anything else i can from someone on here before i go on with the list. If anyone has anything on this list or mayb even aftermarket options, holla at me. 7R3Z-17K945-AA...
  15. killswitch06GT

    lowering springs + on3performance

    Hey guys im looking into some lowering springs for my car. I still have the stock springs and cant stand the gap between my wheels and fenders. I am worried about clearance issues though running on3 piping. I'm currently on 17in wheels but will be going to some 18" sve drifts as well. Not sure...
  16. killswitch06GT

    aluminator question

    found this for sale on ebay http://www.ebay.com/itm/FORD-RACING-4-6L-ALUMINATOR-SHORTBLOCK-SC-M-6009-A46SCB-/390104559781?pt=Motors_Car_Truck_Parts_Accessories&hash=item5ad40b30a5&vxp=mtr#ht_500wt_1054 Is there any way this will work with a 3v? its made for 03-04 cobras but i know we can...
  17. killswitch06GT

    Learn me on VCT Lockouts please

    Ok I tried searching but i cant figure out the whole reason for the VCT lockouts. I see that everyone making numbers in the 600+ range uses them and im trying to figure out why? What is the benefit from vct lockouts? I thought VCT is where 3v's get their power....
  18. killswitch06GT

    boosted motor build!!!

    OK I am a week away from my deployment and along with that is plenty of $$$$. My plan is to have everything ordered and wiating for me when i get home in NOV. That being said, I want to start planning on this build now. I want it to work like this. I will throw out everything im considering for...
  19. killswitch06GT

    Turbo ... What rpm should I shift at??

    I have a 06 with on3 70mm turbo on 8 psi. I've been shifting at about 6k rpm but not sure where I should really shift. What are you other turbo guys reving to?
  20. killswitch06GT

    aeromotive stealth maxing out?

    Hey guys i have the aermotive from s&h performance with the wiring upgrade kit. Im running it with my on3 70mm turbo on 9psi. Lito is still working on the tune for me and in the datalogs its showing that at 4800rpm the duty cycle on the fuel pump hits 0.500 and stays there. I'm pretty sure...
  21. killswitch06GT

    Another fuel issue

    Alright I have the on3 70mm kit on now and in the process of tuning with Lito. The car runs fine anything above half a tank. When I do a wot pull under half it feels like I'm hitting a fuel cut of some kind. The car falls on a face and scares the shit outta me. Lito is convinced its most likely...
  22. killswitch06GT

    fuel system issue help please.

    Ok I have the aeromotive 550 hp fuel setup for S&H Performance and the pump works great. But i have a new problem. When my tank gets close to halfway my fuel level gauge starts dropping to empty and coming back. I figured maybe its just the float sensor going out and decided not to worry about...
  23. killswitch06GT

    Wtb manual boost controller HOUSTON

    I am in Houston and in need of a manual boost controller by tonight. Can anyone hook me up?
  24. killswitch06GT

    Shortblock options

    I am saving up now for a new shortblock for whenever my stocker decides to go boom. I was thinking about mmr at first but my buddy just got a mmr1000 for his termi and is having issues with it so idk anymore. What do you guys suggest? I was also considering just buying a rotating assembly. Any...
  25. killswitch06GT

    Car won't start and stranded help please

    Ok I recently installed a fuel pump from Jeremy at s&h. I was driving and it kept saying my tank was empty then going back up. Finally it stayed saying empty but u really have a half tank. I hear my fuel pump turn on and it has pressure. But after pulling over and turning the car off then on it...

Latest posts

Support us!

Support Us - Become A Supporting Member Today!

Click Here For Details

Sponsor Links

Banner image
Back
Top