Search results for query: *

I have my stock black hood with the factory scoop in perfect condition (three or four rock chips are the only problem) never painted or touched up its all original. I'd like to get $250.00 (not shipped) located in Atlanta Georgia Possible trades though, lower/upper control arms, strut bar...

from what i've seen in pictures the very tip of the hood is opened more for the Shelby GT500 grill, am i correct? will it look dumb on a GT with the stock grill and foglights? i can get this hood for $100 but i'd really like to know first....

P0016 Crankshaft position-Camshaft position correlation Bank 1 Sensor A P0012 Intake Camshaft position timing over-retarded Bank 1 did i get one of the cams a tooth off??? it runs, cranks right up but it idles a little rough

Just like it states^^^ hit me up Sent from my iPhone using Tapatalk

i have two used fuel pumps for sale, i had planned on making my own dual pump set-up but changed my mind. they are located in ATLANTA, GEORGIA and i'm asking $75.00 shipped for each, or trade for other misc. parts for my car (control arms, MSD two step, underhood accessories, etc). thank you for...

looks pretty good if i might say so myself, i know i need to clean my bay up a little bit but i drive it everyday so whatever. it'll be clean before i show it again. next up, aluminum underhood cap kit and mishimoto radiator hoses and every other rubber hose to go with it

so my dumbass decided it would be a good idea to sit idling in a parking lot for a half hour after driving 50 miles (i have underdrive pulleys on my car), car overheated and my weak ass stock reservoir cap exploded all over the motor woohoo. Cool off for an hour, topped back off head home. next...

i have FR500's on my car with the stock lugnuts, they only get about 3/4 of an inch of thread, and i want to put 5/16 spacers on all four, what company sells some longer studs so i can safely run these?

i have two 2006 Mustang V6 fuel pump assemblies that i was wondering if i could make a twin set-up out of if i get the proper hat? or are they useless? was'nt real sure if the 4.0L and 4.6L pumps were much different... ??

just like the title states, it never does it when i'm able to diagnose it, only when i'm driving it'll randomly peg out above the H for no reason... pretty sure its one of the temp sensors but i wanted to ask the community if its happened to anyone since i have'nt had a chance to properly mess...

i'm pretty sure the Brenspeed cams would give more power, but i'm going more for the sound honestly. tax return time i'm buying a pair but i can't make up my mind which just off of YouTube clips... opinions

is there a thread for this on here? going with 3.73's instead of 4.10's and i'd like to do it myself this time

just like the title says, wtf. i took the bulbs out temporarily so i can still drive it around as its my only car, i'm guessing a sensor on the tranny is messed up and its making the car think its really in reverse and thats why the cruise is'nt working???????

i just got some 275/40/17 Nitto NT555R's on the some older GT wheels for the strip, i was wondering since the spare 17" in the trunk is so light if anyone has ran them on the front? i'm thinking about just locating another spare and using that wheel/tire combo at the strip only, i would'nt drive...

i really want these wheels on my car, but i'm not sure what exact size or offset. i'm pretty sure that 10's will fit up front and 12's out back if i roll all four of my fenders, or at the very minimum 9's and 11's. but what offset?? the mustang in the picture appears to have the same size front...

Works great, the only special thing this requires is to drill your stock holes to 5/8 inch diameter (one size bigger, cause i could only find 5/8 hyme joints) I got the stuff to build the bar from a circle track racing company (Day Motorsports 800-543-6238) Here are the part numbers for...

i bought the two carbon fiber pieces from HOLYWD a while back (thanks bro), had some paint matched up to it and painted the valve covers, fuel rails, and intake cover (which i also sanded smooth, no lines or 'powered by ford') two coats of paint, four coats of clear, wet sanded with 1000 grit...

I needed four tires anyway, so I figured what the hell. I was able to scoop these up for $600 with decent tires on them. Shows off my caliper paint real well lol (Brembo or Wilwood is definitely the next upgrade)

a while back my fiance's dad ran my mustang into the garage door and messed up the bumper pretty good, with deep grooves and scrapes and such. i've decided rather than replacing it i would like to swap to the Shelby front end, i'm obviously gonna need the headlights, new foglights, and the...

i installed these sportlines, everybody kept saying i needed to get a camber kit but i found out if you rotate the strut caps 180-degrees so the arrow is facing the opposite way it will offset the strut just enough to get the camber in factory specs. i was wondering if this would wear the tiny...

Purchased these from a member on here awhile back, never posted pics. They have a custom tip welded around the outside to make them 4.5" i think they look pretty good, sound great of course

Took me about 3 hours total, not too bad. got some gray rear panels out of the junkyard to spray and cut the holes in and save my stock ones. Nothing special but i like it, i only paid $100.00 for it. one thing i forgot to mention is i had it painted black to match the car before i installed it

i'm new to the online stuff, this is my first post. i have about two grand to spend on my 07 GT (all thats done is exhaust), i'm thinking about doing the JLT/SCT intake programmer combo, 4.10's, and the stage 1 ThumpR cams and phase limiters. i live in Atlanta Georgia where we have emissions...