Whipple Supercharged 06 GT Convertible 324 STROKER! Fully Built!

AbdullaGT500

forum member
Joined
Oct 26, 2010
Posts
4,482
Reaction score
4
Location
Little Rock, AR
I'm getting 5.0 fever just like everyone else, I think it's time to put the vert for sale and see what I can get together towards a new car.

Where to start....

I bought the car 2 years ago exactly. It was 100% bone stock when I bought it with 39,xxx miles on it. Carfax/Autocheck indicate odometer clerical error/roll back(very common). Mileage is 100% Guaranteed correct.

Just rolled 68,000 miles yesterday.

The car runs and drives great! No problems whatsoever! No funny noises or lights in the dash. I would NOT hesitate to drive this car across the country with the A/C blowing ice cold.

The motor has about 3,000 miles on it, it was installed right at 65,xxx miles. I bought the short block from G.I JOE, who had it built by Mike of Modular performance prior to him passing away.

The Long block was assembled using all new chains, guides, springs, retainers, lash adjusters, seals, etc. I have receipts for the motor as well.
Enough of the nonsense, here are the mods:

Specs on the motor:
324 Cubic Inch FRPP Boss 5.0 modular (5.4L)
Kellogg 3.75 stroke crank
Diamond custom 17cc stroker pistons 9.4:1*
Upgraded Piston H13 pins at .927 dia
Total seal SS ring set
Oliver billet "I" beam stroker rods @ .927”
HP 153 coated main bearings
King 7065 coated rod bearings
ARP 156-5401 main studs
Rear seal
Block was decked with hone plates
Ceramic coat piston tops
Dry film coat piston sides
Comp 127350 Stage II Blower cams
Comp Valve springs/Retainers
New 2008+ Style heads
Ford Racing Wrinkle Black etched Cam covers

Other engine mods:
2.3L Whipple Supercharger
Whipple 10-rib kit, making 16-17 lbs of boost
GT500 injectors flow matched to 80lb injectors
GT500 Fuel system
Mac Long Tube headers
Mac Prochamber
Bassani Race Axle Back
Exedy Billet Steel Flywheel
Exedy Mach 600 Clutch
Moroso Coolant/Power steering tanks
K&N breathers on Both Cam covers and oil cap
SCT Programmer Included. Tuned By Manuel@TuDyno!

Suspension/brakes:
2012 GT500 take-off Brembo Brakes
BMR Billet Lower Control Arms
BMR Tubular K-member
Eibach Pro Lowering Springs
Eibach pro-dampner shocks/struts
Steeda Tubular Radiator support
Front Sway Bar Delete
Steeda Adjustable Panhard Bar
4.10 Ford Racing Gears

Wheels/Tires:
Forgestar CF5 Gunmetal Concave Wheels
18x9" Fronts 275/40/18 Nitto Invo tires 90% Tread
18x10" Rears 315/30/18 Toyo Proxes R888(2 weeks old)

Interior/Gauges:
"Porno" Red leather seats
Brand new Red Floor mats
Leather Padded armrest with red stitching
Red Raptor Shift light
Innovate LC1 Digital Wideband(blue)
Autometer Cobalt Fuel pressure gauge(not hooked up)
Autometer Cobalt Mechanical Boost gauge
SOS triple Gauge pod

Exterior mods:
GT/CS Front Bumper
GT500 Rear bumper
2010+ Mustang black mirrors
Professionally painted tail lights/3rd brake light/rear markers
Clear smoked front side markers
CDC Convertible Style bar w/3rd brake light
Definitely a sleeper!

The Good:
Car runs and drives like a stock car. Other than the power and nasty exhaust note, you would think you were driving a stock car.
You cannot build this car for anywhere close to my asking price

The Bad:
Paint has some very light scratches, 99% of which will buff out.
Hood has a 1 1/2" Chip right in the center where the belt shredded and hit the hood from the bottom. If this is a deal breaker, I can have the hood repainted.

I am asking $24,500 OBO. If you are interested, please do not hesitate to contact me and we can work something out. To sweeten the deal, I will include a TR6060 Transmission with a brand new shifter/knob/shift knob/GT500 Driveshaft ready to install, just need a 26 spline clutch disc.

The car has never been dyno'd or taken to the track since the new motor was installed.
Estimated power is 6XX WHP and feels like every bit of it. This car is a BLAST to drive!


I have several stock parts for the car if the buyer is interested. I will also let you have your choice of red or black leather, I have both and can install whichever the buyer chooses.

I have the clean and clear title IN HAND. I can also help with delivery of the vehicle, and also can ship internationally since it is our specialty at my work.



5c4852c1-1.jpg

4f4d6675.jpg

c72d50f7.jpg

IMG_4201.jpg
8cfd82fb.jpg

3c435404.jpg

2d17480f.jpg
407b4639.jpg

Old wheels:
81ff97ab.jpg

IMG_z5130.jpg

Red:
0c6aac16.jpg

c20fe13e.jpg
66273e1e.jpg

Black:
eb375658.jpg

cdf08a15.jpg


Any questions, just ask.
 
Last edited:

stkjock

---- Madmin ----
Staff member
Administrator
Super Moderator
S197 Team Member
Joined
Jul 10, 2007
Posts
40,253
Reaction score
3,169
Location
Long Island NY
Seriously, did no one see my post above? :thud:
 

AbdullaGT500

forum member
Joined
Oct 26, 2010
Posts
4,482
Reaction score
4
Location
Little Rock, AR
Thanks. I don't mind the free bumps though.

Also will consider trades! Especially for a 5.0.

As for parting it out, I will ONLY part it out if the COMPLETE long block is sold and money is received prior to removing.
 

mikeyfitz

Resident Fuktard
Joined
May 4, 2011
Posts
8,538
Reaction score
0
Location
Houston, TX
Trade me motors...
Wheels..
CS Rear....

Haha very sexy car man. Actually interested in motor somewhat.
 

Doug M

Fast Cars & Freedom
Joined
Dec 15, 2009
Posts
14,574
Reaction score
3
Location
AL. Baby
what the freak are you thinking man? sorry i had to ask, glws. maybe i can sell mine and get yours.
 

808muscle

forum member
Joined
Nov 1, 2009
Posts
4,039
Reaction score
7
Location
Maui
Absolutely gorgeous car. You would get one run and my track then banned. Verts are cut off at 13.5 unless they have a roll bar. Good luck with the sale....shes a beauty.
 

mikeyfitz

Resident Fuktard
Joined
May 4, 2011
Posts
8,538
Reaction score
0
Location
Houston, TX
If I had 24k to throw out that im not saving for emergencies/mortgage, fuck yeah I would lol
 

BlackOutUT

forum member
Joined
Aug 12, 2010
Posts
348
Reaction score
1
Location
Austin, TX
jeeze, if this is only at 18.8 makes me wonder what I'll get for mine GLWS, amazing ride
 

Support us!

Support Us - Become A Supporting Member Today!

Click Here For Details

Sponsor Links

Banner image
Back
Top