FS: Bogart D10's with tires.

[The Reapar]

Picked these up and don't really have a use for them. They are setup for an 05+ car but Im sure would work on a new edge or SN95 car with some checking.

The back slicks are 28-10.5's and have 8 passes on them. They are practically new and have lots of meat left. The front runners are Mickey Thompson ET fronts and still have the nipples on them. The fronts are 4.5's and the backs are 10.5's and have spacers welded on them. Front tires are 28" tall as well, so they will be to big for any mustang older then 05.

I am not 100 percent sure but it looks like with the spacers you are going to have a 6.5 - 7 inch back spacing on the rear and about 1.5 on the front. The backs will bolt onto a new edge car and clear. They hit the brake line block on the caliper on cobra brakes.

Asking 1200 for everything. Comes with lugs. Prefer not to ship.

Charles
502.472.8747
[email protected]

 

[96blowncobra]

AHHHH! of course the bogarts ive been looking for show up after i buy different parts lol. GLWS although i hope they're around for a week or two.

 

[The Reapar]

Thanks.

 

[GT.350-R]

Would you need to run longer wheel studs or are the shanks on the lug nuts long enough to reach. Man I want these and they are even in Indiana.

Would you sell with out the tires?

 

[GrnBullitt08]

Nice setup

 

[The Reapar]

Would you need to run longer wheel studs or are the shanks on the lug nuts long enough to reach. Man I want these and they are even in Indiana.

Would you sell with out the tires?

The lugs will reach stock studs. I'd consider it but I'd really have no use for the front tires.

 

[GT.350-R]

How much for the 4 wheels,lugs and front tires only. You keep the back tires. No need to ship since we're both in Indiana.
thanks

 

[doogie]

I am not 100 percent sure but it looks like with the spacers you are going to have a 6.5 - 7 inch back spacing on the rear and about 1.5 on the front. The backs will bolt onto a new edge car and clear. They hit the brake line block on the caliper on cobra brakes.

Have you actually checked the fitment on a S197?? Asking because a 10 inch wheel requires a 7.5 inch backspace to fit. And if these are a 10.5 with a 6.5 or 7 BS, they going to stick out.

 

[The Reapar]

Have you actually checked the fitment on a S197?? Asking because a 10 inch wheel requires a 7.5 inch backspace to fit. And if these are a 10.5 with a 6.5 or 7 BS, they going to stick out.

They came off of an S197. I'll put a straight edge on them tomorrow and actually measure it. I just eye balled it.

 

[The Reapar]

How much for the 4 wheels,lugs and front tires only. You keep the back tires. No need to ship since we're both in Indiana.
thanks

I'll send ya a PM

 

[GT.350-R]

Haven't recieved a PM.

 

[*JZ*]

Damn nice deal

You should post them up on SVTP as well as RacingJunk.com

 

[The Reapar]

Damn nice deal

You should post them up on SVTP as well as RacingJunk.com

Thanks,

They are on RJ already.

 

[The Reapar]

Backspacing measures 7.5 from the backside of the spacer to the outer edge of the wheel.

 

[The Reapar]

SOLD!