Recent content by DamanC

  1. D

    What have you done to your mustang today?

    Fairly long list, and its been a months long project. Replaced phaser deletes with new phasers and phase limiters, replaced broken chineseum headers with LTH long tubes, added Division X 2 pump return style fuel system, changed to 1100cc injectors, changed to Whipple 132 throttle body, replaced...
  2. D

    Throttle Unresponsive while rolling slow

    I have the same swap, I discovered too late that my wiring harness was resting against my long tube headers and was having the same speedo issue because my vss wire was cooked. I had to reroute the harness, replace a couple wires, and wrap the whole harness section in heat shielding. I haven't...
  3. D

    Considering a pulley change. 2011+

    So I'm considering going down to a 3.48 pulley size from 3.6 on my Vortech kit. I already have a KB fuel pump booster 47# injectors and am tuned by Lund, the motor is stock otherwise . I currently max our at 7.5-8.5 lbs of boost. What other mods should I do and how much more power can I expect...
  4. D

    Fan problems again

    Ok just a quick update. Turns out my fan was bad too, burnt up the pigtail on the new resistor. So I went looking for another new one. The part number for the gt fan resistor is BR3Z8L603A and Ford price is 204$ at most and 90$ at the lowest I could find. Well after some digging, it turns out...
  5. D

    Fan problems again

    I replaced my pigtail with a new one after my last resistor burnt up. I'm looking at just picking up a pwm fan controler and skipping the factory crap. Sent from my SM-N910T using Tapatalk
  6. D

    Fan problems again

    So I've replaced the fan speed resistor once already on my 2014. Last weekend I'm about 100 miles from home when my car starts overheating in traffic. I pulled into a parking lot and checked to see if the fan was working, it wasnt, turned on the a/c to see if it would kick the fan on, it didnt...
  7. D

    Does anybody know where to get a cooling fan pigtail - 5.0

    Thanks. I found the part number on rockauto.com but they didn't have any in Stock so I searched using this part number "MOTORCRAFT WPT1343" I found a site that has them in stock and ordered it. Just in case someone else is having the same problem. This is the part I ordered This is (the...
  8. D

    Does anybody know where to get a cooling fan pigtail - 5.0

    So for some reason the resistor on my cooling fan fried and when it did it took out the connector on my harness with it. I already replaced the resistor and I have a spare fan motor in case that is bad too. But now I need a piece of a harness to replace the burnt connector on mine. Ford wants...
  9. D

    Loss of power and exhaust sounds odd.

    I really am lucky that I didn't mess anything up. I started looking into what happens when a cat goes bad on an FI coyote, and reading about the aftermath really surprised me. I've had bad cats on cars in the past and never experienced damage. Sent from my SM-N910T using Tapatalk
  10. D

    Loss of power and exhaust sounds odd.

    Finally pulled my exhaust off because everything else failed. I look inside my passenger side cat and the material is in three pieces. Guess I'm going catless. Im going to call AED on Tuesday to schedule a time to get a tune.
  11. D

    Loss of power and exhaust sounds odd.

    I don't know how well that would work with the supercharger and larger injectors. Sent from my SM-N910T using Tapatalk
  12. D

    Loss of power and exhaust sounds odd.

    I'm running the tune that vortech did in house for me. I was part of their R&D program for the 2014s. I'm located in California about 40 miles from Oakland. Sent from my SM-N910T using Tapatalk
  13. D

    Loss of power and exhaust sounds odd.

    Ok. So it's possible for the intake cam to be stuck in the 0* +/- position. I tried something this morning on my way to work, where I unplugged the phaser on the drivers side intake cam. There is no change as far as seat of the pants feel and sound from the exhaust, also the check engine light...
  14. D

    Loss of power and exhaust sounds odd.

    Do they run in an either/or sort of way? Or do they run in the middle and only advance or retard when called for. If you look closely at my pictures a few posts back, it looks to me like the cams usually run in the middle and only advance or retard when called for. The bank 1 intake cam just...
  15. D

    Loss of power and exhaust sounds odd.

    It's a 2014. The only code that trips is if I take it to redline, I get a random misfire code. P0300 Sent from my SM-N910T using Tapatalk
See more

Latest posts

Support us!

Support Us - Become A Supporting Member Today!

Click Here For Details

Back
Top