Recent content by LRS197

  1. LRS197

    LCAs relocation brackets necessary?

    Google / read about LCA relocation brackets with respect to anti-squat.
  2. LRS197

    CAM-C AutoX Tires Rival S 1.5 or RT660

    I haven't run the 660 but did mount a 315 to check for clearance issues as the 660 runs a little wider than the 315 Rival 1.5. My setup is MCS, coilovers, forgestar 18x11 wheels from Vorshlag, 2.75 neg camber with a 3mm spacer with stock hubs / studs. The 660 cleared but it was really close...
  3. LRS197

    Oil Filter Adaptor Plate

    Oil filter adaptor plate. Fits S197 and anything else that has the same threads. 4 ports to install sensors for gauges. I used it about 3 months. I found I needed to install an oil cooler and had to buy another plate. $25. I bought it from here...
  4. LRS197

    R Compound Tires for a Track Newbie?

    Good advice. If the Toyos are pretty new put them in bags and store where it stays cool but at least not a hot place.
  5. LRS197

    Sorry the 4 pt harness sold yesterday.

    Sorry the 4 pt harness sold yesterday.
  6. LRS197

    sold

    SOLD.
  7. LRS197

    sold

    Ok I need this sold. Now $100 plus shipping.
  8. LRS197

    sold

    Yes the inboard side uses the factory female belts. On the outboard side you install new male connectors at the base of the front seat and on the outboard of the back seat while leaving the factory mounts in place. That way you can either leave the 4 point in place and use it or disconnect...
  9. LRS197

    sold

    Price drop to $125. You can leave the factory belts installed and use those and leave the 4 point harness installed at the same time. Pick which one you want to use, factory or the 4 point harness.
  10. LRS197

    Sorry I missed this message but did. & I have the harness. It does have all hardware needed...

    Sorry I missed this message but did. & I have the harness. It does have all hardware needed to install. You can leave your factory harness in place and use it with this Schroth installed also. The Schroth harness does not have build dates, It does have application information, use only on...
  11. LRS197

    sold

    SOLD This is a Schroth 4 point seat belt harness that bolts into a S197 mustang. I purchased this new in May, 2015. The belts on the outboard side bolt into the factory seat belt anchors and the inboard side uses the factory harness to connect. Easy to install and remove. All is in good...
  12. LRS197

    Panhard Bar & Brace, Ford Racing Diff Cover

    I sent a visitor message with contact info to DudeStang
  13. LRS197

    This is LRS197 about the panhard bar. You can send an email to [email protected] or text...

    This is LRS197 about the panhard bar. You can send an email to [email protected] or text / call me at 501 249 3303 My name is Corey Pettett
  14. LRS197

    Panhard Bar & Brace, Ford Racing Diff Cover

    Less than 10k miles on panhard bar / brace. I don't want to separate the brace from the panhard bar. Buy both and sell the panhard bar. The differential cover also has less than 10k miles. Will sell it separate.
  15. LRS197

    Panhard Bar & Brace, Ford Racing Diff Cover

    Installed a watts link so I have the following I no longer need. Whiteline panhard bar and brace. Fits 2005-2014. $110 shipped to lower 48. SOLD Ford Racing 8.8 differential cover. $90 shipped to lower 48. SOLD

Latest posts

Support us!

Support Us - Become A Supporting Member Today!

Click Here For Details

Sponsor Links

Banner image
Back
Top