Search results for query: *

Google / read about LCA relocation brackets with respect to anti-squat.

I haven't run the 660 but did mount a 315 to check for clearance issues as the 660 runs a little wider than the 315 Rival 1.5. My setup is MCS, coilovers, forgestar 18x11 wheels from Vorshlag, 2.75 neg camber with a 3mm spacer with stock hubs / studs. The 660 cleared but it was really close...

Oil filter adaptor plate. Fits S197 and anything else that has the same threads. 4 ports to install sensors for gauges. I used it about 3 months. I found I needed to install an oil cooler and had to buy another plate. $25. I bought it from here...

Good advice. If the Toyos are pretty new put them in bags and store where it stays cool but at least not a hot place.

Sorry the 4 pt harness sold yesterday.

SOLD.

Ok I need this sold. Now $100 plus shipping.

Yes the inboard side uses the factory female belts. On the outboard side you install new male connectors at the base of the front seat and on the outboard of the back seat while leaving the factory mounts in place. That way you can either leave the 4 point in place and use it or disconnect...

Price drop to $125. You can leave the factory belts installed and use those and leave the 4 point harness installed at the same time. Pick which one you want to use, factory or the 4 point harness.

SOLD This is a Schroth 4 point seat belt harness that bolts into a S197 mustang. I purchased this new in May, 2015. The belts on the outboard side bolt into the factory seat belt anchors and the inboard side uses the factory harness to connect. Easy to install and remove. All is in good...

I sent a visitor message with contact info to DudeStang

This is LRS197 about the panhard bar. You can send an email to [email protected] or text / call me at 501 249 3303 My name is Corey Pettett

Less than 10k miles on panhard bar / brace. I don't want to separate the brace from the panhard bar. Buy both and sell the panhard bar. The differential cover also has less than 10k miles. Will sell it separate.

Installed a watts link so I have the following I no longer need. Whiteline panhard bar and brace. Fits 2005-2014. $110 shipped to lower 48. SOLD Ford Racing 8.8 differential cover. $90 shipped to lower 48. SOLD

Lowered price on konis. $350.

25,000 miles. I purchased these new and they are sevicable, no leaks, compression and rebound feel good. I'm selling because I upgraded to MCS.

]2- Koni Adjustable Sport Shocks, Part # 8241-1240Sport, fits 2005-2014 Mustang: 2- Koni Adjustable Sport Struts, Part # 8741-1549Sport, fits 2011-2014 Mustang. $350 + shipping Steeda Heavy Duty strut mounts, Part # 555-8135, fits 2011-2014 Mustang. SOLD 4- Eibach Pro Springs, Part...

Sale pending.

SOLD - Bob’s Autosport differential / axle catch can SOLD Bob’s Autosports differential / axle catch can. Installed only to test fit. Fits 2005-2014 Mustang but will not work with Ford racing finned differential cover. New $130...

PM sent on panhard & lower control arms / relocation brackets.

Bob's catch can didn't work for me I tried to use the bob's catch can. Didn't work. I have eibach pro and 3 inch exhaust. I had an issue with the vent tube fitting on the axle hitting the exhaust. I modified the fitting but it was still real close. But the can itself hit the ford racing...

I had the same problem repeatedly while autoxing. If you google on the issue the fixes seem to be a) replace the clutch line with braided steel line, b) remove a helper spring that makes the clutch pedal easier to engage or c) replace the pressure plate / clutch. I replaced the clutch line...

Rival S This is my first post on this site as I recently joined. I'm an old time autoxer and have driven in many classes from stock to modified. My Mustang will be in CAMC this year but on old ZII's. I was at the College Station tour but in a STR S2000. We were on the new Rival S. That was my...