Recent content by shywaz

  1. shywaz

    Factory door subwoofer playing up

    Installed voltage stepdown from 12v to 5v and pop is gone!! Thanks Autokyrios!
  2. shywaz

    Factory door subwoofer playing up

    Finaly i've sorted it! Dont know if this is common, but connector pins were broken inside amps, (two of them even popped out while disconnecting) so i've just soldered them back, and all humming went away. PS. My both amps are on drivers side, not on different sides PPS. Now i get loud pop on...
  3. shywaz

    Factory door subwoofer playing up

    Thanks!!! Hopefully I'll get it sorted
  4. shywaz

    Factory door subwoofer playing up

    Previously my car got SJB issues, found two microcontrollers burned out. If the water can enter SJB, maybe it also can do the same at the other side of the car? Hence driver side SUB/AMP not working properly. Im guessing something might be not ok with the amp, as wiring at the headunit seems...
  5. shywaz

    Factory door subwoofer playing up

    Since im in Europe, calling Crutchfield may not be the best thing to do There is a metra kit already in it...
  6. shywaz

    Factory door subwoofer playing up

    Hi Fam, Fighting another gremlin in my '05 Mustang GT. When I bought it, it had an Android headunit upgrade already installed. Just a headunit, speakers being left OEM. Since it originally had Shaker 500 system, I know Subwoofers must be in the front doors, but I can hear only high notes...
  7. shywaz

    2005 GT SJB replacement - what to look for?

    Luckily my electrician was able to fix it, just resoldered two new microcontrollers
  8. shywaz

    2005 GT gauges shows random

    Finally i have it sorted! It seems to be related to my constant brake lights on, which was caused by burned microcontrollers on SJB. Replaced two of them, all problems are gone.
  9. shywaz

    2005 GT SJB replacement - what to look for?

    I'm still waiting for repair parts to arrive, might able to fix it. Anyway, if mine will be busted, what i should look for when buying from ebay? Exact part number match? Or just buy it from the car with same equipment/options? What about PATS? Will i need to reprogram it? Any other issues?
  10. shywaz

    2005 GT SJB replacement - what to look for?

    Im in Lithuania, and you're right - i have blinker conversion, but could this be the issue? Or its just coincidence? What is the right way to do blinker conversion to prevent this happening again?
  11. shywaz

    2005 GT SJB replacement - what to look for?

    Hi there, Recently, my gauges started to show random behavior, so I went ahead and replaced them all. It's still the same behavior... But after a few days, my brake lights turned on, and stayed forever on... I've checked the brake light switch near the pedals - the switch is ok, lights are on...
  12. shywaz

    2005 GT gauges shows random

    Replaced all 6 stepper motors, what are the odds i got new but broken ones? Tacho seems ok, Checked speedo with gps, readings are accurate - but when i stop needle doesnt rest on zero, it still shows like 10mph. Fuel seems ok. Coolant temp is 2/3 of full - is this normal or my car is slightly...
  13. shywaz

    2005 GT gauges shows random

    So it seems like my stepper motors needs replacing Charge is good, grounds too, tried before mentioned procedures with no luck, so the only thing left is stepper motors, as code reader gives nothing too. Anyway, changing stepper motor is pretty straight forward job, except how to put needles...
  14. shywaz

    2005 GT gauges shows random

    Will have another look with voltmeter. Any particular grounding spots to look for? Or just only the battery terminals?
  15. shywaz

    2005 GT gauges shows random

    Looked at how to remove instrument cluster, and it says "Prior to removal of the instrument cluster it is necessary to upload the instrument configuration information to the diagnostic tool" Is it really necessary? What for?

Latest posts

Support us!

Support Us - Become A Supporting Member Today!

Click Here For Details

Back
Top