First pass of trailer on new setup leaving on 4 psi 16 psi max ran 5.85@118 in 1/8th mile 9.33@134 1/4 letting out before 1/4 traps 1.42 60ft
Should be easy 8's with some tweaks. We haven't even turned it up yet [emoji41]
https://youtu.be/2Z9vNxWOxV8
https://youtu.be/S9tsiX_dc4Y
Sent from...
Here is a teaser of low boost
12psi on 17 degrees of timing letting out at 6500rpm through a 8" converter and th400 on a SuperFlow loaded dyno that is stingy.
We are changing the A/R on the turbo before turning it up anymore because it is too violent when it comes on boost even with the Boost...
Yea some but nothing major. We are back halving the other shop car(twin turbo coyote Mark VIII) right now.
I did modify the rear of the car
We are waiting for some install pics of the UPR anti-roll bar placement as it is the weld in the frame rail style.
Interior is all back together. Everything is wired up and tucked in and out of sight. I wired the Bump Box button/scramble button into the cruise control switch in steering wheel [emoji4]
I painted the side of the console where the park brake sits black so the line lock button is hidden.
PST driveshaft came in today. Precision Shaft Technologies builds some of the finest driveshafts out there.
Billet Yokes and DOM Chromemoly tube SFI certified good to 2,000 HP
Also got the dipstick mounted and trans harnesses sorted out and wired up.
A little inside shot of the magic in...
My car has been down the track with the turbo but on low boost and 6r80 and broke the left LCA on the hit.
If my schedule permits it will be at BG for TCS
Doing a little work on the Rearend finally
1350 style Cobra pinion flange swapped over.
Spool
Girdle back on
Tiny 35 spline axles and 5/8" studs
Axle tube weld been holding up for over a year and a half of beating on big sticky tires [emoji39]
Lca relocation brackets filled in solid to...