Search results for query: *

  1. Dcraig10004

    Freeze plug locations.

    Hi guys, are there any freeze plugs on the rear of the engine between the engine and tranny on my 2009 GT?
  2. Dcraig10004

    In Desperate need of SJB

    You need to look at your SJB. There will be two sets of numbers. Both have to be the same. You'll have a part number like 9R3T-14B476-HA and you'll also have a Kit number like 9R3T-15604-HB The replacement has to match exactly. If they do not, then there will be things that do not work. Or do...
  3. Dcraig10004

    In Desperate need of SJB

    GO to the Forscan page https://forscan.org/home.html and you will find the information in the forums section on how to download it and enter in to the as-built-data of the IC so you can turn the TPMS light out permanently.
  4. Dcraig10004

    In Desperate need of SJB

    Yeah, I did that a couple of months ago. All good.
  5. Dcraig10004

    In Desperate need of SJB

    Here is what pulled from AllData. 9R3Z-15604-G
  6. Dcraig10004

    Mods vs HP

    That 282/296 is definitely post-mod, and as mentioned above, it depends on what it was dynoed on. Generally, a Powerdyne Mustang Dyno is very stingy giving the numbers you hope for, but they are true numbers compared to other dynos. Throw a set of cams and a FR intake manifold on, and I think...
  7. Dcraig10004

    Lito tune

    Yep. I'm happy with it. Going WOT from 2000-6500 RPMs was a trip, especially with 4:10's. I think I used over 1/4 tank of gas on that pull, lol. That's all I'm doing to her as far as the engine. I would love to get a 6-speed transmission, but the ole lady put the kibosh on that one. Maybe if I...
  8. Dcraig10004

    Loud Ticking

    I just got done having Howards rattler cams installed, brand new coils and plugs, and all new phasers/chains/guides/tensioners installed and had it dyno tuned. I also have a Ford racing intake, a GT500 TB, Pypes LTs, etc, etc.. Anyway since I installed the cams and the timing kit, there is a...
  9. Dcraig10004

    Lito tune

    Final Lito tune results in 335 RWHP 321 RWTQ Dynoed on a PowerDyne Mustang Dyno which tend to give more accurate readings than any Dyno.
  10. Dcraig10004

    Schematics, egr/pcv.

    You bet.
  11. Dcraig10004

    S197 Mass Air Flow issue

    And why in the world would you buy ANYTHING from AutoZone?
  12. Dcraig10004

    Schematics, egr/pcv.

    Here ya go
  13. Dcraig10004

    Lito tune

    I have an Airaid CAI, Pypes LTs, and hi-flow catted x-pipe, Flowmaster outlaw AxleBack, Ford Racing intake, GT500 60mm TB on my '09. Dyno Tuned by my guy here in Pa. Got 309 RWHP and 301 RWTQ. Then I installed Howards Rattler Cams and brand new chains/tensioners/phasers, etc... and the same guy...
  14. Dcraig10004

    Rattlers

    Yep. pretty much. I just needed to know if there were any small differences, which there aren't, except Howards doesn't mention anything about removing those 3 roller followers, which I wasn't going to do anyway. But, man when putting the driver's side on, I accidentally knocked on off, and then...
  15. Dcraig10004

    Rattlers

    Does anyone have the install manual for Howard's Rattler cams for my 09 GT? They didn't come with one.
  16. Dcraig10004

    Keeping Rust away...undercoating?

    Fluid film is the way to go. It's a lanolin-based formulation that stops existing rust on contact. Penetrating on contact, creates a fluid, self-healing barrier that is always active and will not chip or crack, protecting vehicle undercoatings and exposed metals for extended periods of time. I...
  17. Dcraig10004

    Rotational noise? Drive shaft?

    Get rid of the two-piece driveshaft. It will absolutely cure this noise. It's like night and day. Go for the For Racing one-piece aluminum driveshaft. You will be amazed.
  18. Dcraig10004

    In Desperate need of SJB

    Ok. So they programmed my latest SJB and downloaded the as-built data into it, and everything is back to normal except the TPMS indicator and message. Can the TPMS warnings be eliminated?
  19. Dcraig10004

    In Desperate need of SJB

    UPDATE: I got another SJB from LKQ and of course, it isn't the same part number as they claimed it was. So I just got off the phone with the dealer and told them I want this one re-coded with my car's as-built data, so they said ok, to bring it back in. They will need to get into Fords system...
  20. Dcraig10004

    In Desperate need of SJB

    It's worth a shot. I will contact the dealer today.
  21. Dcraig10004

    In Desperate need of SJB

    There's only a warranty on repairs, if the SJB was procured by Ford. I bought the SJB and had them install and program it. Is that not correct?
  22. Dcraig10004

    In Desperate need of SJB

    No. Ford installed it and programmed it. They called and said it was done and the only thing wrong was the airbag light was on, which I would have dealt with. But when I went to pick it up, my keyfob didn't work, so I unlocked the driver's door with my key and when I opened it, the horn started...
  23. Dcraig10004

    In Desperate need of SJB

    That sounds like a possibility, but I will wait until I get the one from LKQ to see what does or doesn't work. This is getting to be a pain. Auto ECMs said I have an oddball SJB. One of a kind type. The only one I actually saw a picture of the label that matched mine exactly is on eBay in...
  24. Dcraig10004

    In Desperate need of SJB

    Oh the drain is definitely from the SJB because I had another one installed and it doesn't drain the battery anymore, but my remote doesn't work, as soon as I unlock the door with my key the alarm goes off, lights start flashing, but it will start and then the alarm goes off, but I also have a...
  25. Dcraig10004

    In Desperate need of SJB

    LKQ has one! 9R3Z-15604-B... Thanks 86GT35!!!!

Latest posts

Support us!

Support Us - Become A Supporting Member Today!

Click Here For Details

Back
Top