Search results for query: *

  • Users: strong_j
  • Content: Threads
  • Order by date
  1. strong_j

    Fs: Bosch 105# injectors

    Selling my bosch 105# injectors. Only have dyno time and acouple of 1/4 mile passes on them. $570.00 shipped. They're located in Arlington, tx Bought some id2000's and don't need them anymore.
  2. strong_j

    Will ID2000's work with bs3?

    Well I'm fixing to bite the bullet on some id2000's, but I just want to make sure that they will work with a big stuff system since they are high independence injectors and they won't cause interference with the ecu or the fast sensors.
  3. strong_j

    Bs3 uegor error help!!

    Ok my tuner calls me and is saying that he's pulling his hair out with tuning my mod 3v with the bs3 and wants me to buy the MMR distributor conversion for the bs3 which i really really dont want to do since its like 1,800 bucks. He says that the UEGOR is seeing 27 instead of 28 and that itll...
  4. strong_j

    FS: Corbeau fx1 black w/brackets Dallas, tx

    I'm selling my corbeau's because I decided to just keep my stockers. The seats do come with mounting brackets. These arnt the wide version. I prefer pickup only and they are located in Wylie, tx kinda close to Dallas, tx. $600 for everything and the seats are in EXCELLENT condition.
  5. strong_j

    Finally stepping in a 5.0

    Well my dealer got a 2011 gt/CS and I have the option of getting it at invoice so I'm biting the bullet tomorrow and if everything goes smooth ill be bringing it home to the stable. It has around 30k miles and has borla axlebacks. Ill get more pics tomorrow. :D
  6. strong_j

    Changing things up. Supercharger<turbo

    Well I figured it's about time to make a progress thread on my rebuild. I ditched the whipple and went with the THP twin 61mm kit. Also I've added some more goodies in the process. Jpc t56 magnum 2.67 first Big stuff 3 BMR kmember and arms Turbosmart eboost2 controller RGR turbo cams Big...
  7. strong_j

    Kooks long tubes 1 7/8 x 3" 3v

    I'm selling my kooks long tubes since I'm going turbo. These things are BARELY used (less than 200 miles) They are jet hot coated gray and are the big 1 7/8 primaries and 3" collectors instead of the 1 3/4 primaries to 2.5" collectors. There's some nicks here and there from the install nothing...
  8. strong_j

    Tremec 3650, msd cops, al. driveshaft, etc.

    Up for sale is some stuff out of my Shelby. Bought a t56 mag so no need for this stuff anymore and bought a big stuff w/ LS1 coils so no need for the msd. Tremec 3650- SOLD shifts great, absolutely nothing wrong with it at all. 30k miles. Just had the fluid changed. Dynotech aluminum...
  9. strong_j

    Big stuff 3 ignition?

    What is everybody using for ignition boxes?? Preferably under 500 bucks. I've ordered it and all the gm sensors I need I think.
  10. strong_j

    Hurst shifter for tremec magnum??

    Does anybody know if hurst makes a shifter for the magnum transmission?? I'm fixing to order the magnum and looking at the steeda tri-ax it really just doesn't catch my eye like the hurst does on my Shelby gt.
  11. strong_j

    ditching the blower and going twins (advice on prices)

    well guys it's time to ditch the whipple and go the turbo route, but before i buy everything i want to ask if theres any place with cheaper prices, bad reviews on product, or am i going in the wrong direction. Here's my list (all prices from jpc website) ford racing 62mm mechanical TB- $589...
  12. strong_j

    TX: 08 nissan 350z

    I'm selling my 2008 350z. It has the nismo v2 body kit on it with the front bumper having canards on it. The car is in great condition. located in dallas, tx -black leather interior -38,xxx miles -nismo v2 body kit (with carbon fiber wing) -carbon fiber hood - AAM test pipes - 6 speed manual...
  13. strong_j

    Cream color oil in whipple intake mani

    Okay my car has been acting funny and idling weird (a/f around 13-14 running e85) but from a rev it'll drop low (fixing to die) and come back up to idle, also it's hard to start like it cranks forever. It just started acting funny while I was driving goin about 40 and I wasn't driving it hard...
  14. strong_j

    WTB: after market suspension bmr preferred.

    BMR products are highly preferred But I'm looking for K-member preferably 1/2 inch lowering mounts A-arms Rear Upper & lower control arms Relocation brackets (control arms not sway bar) Panhard bar Cobra jet springs Extreme anti roll bar Tell me what u got. Pm, post, or text 972-824-9240...
  15. strong_j

    Need advice on power adder (turbo/centri)

    Okay well I'm at my limit with the whipple. Before the motor was heat soaked it put done 743 rwhp at 6900 rpm. So time for a new power adder to get me where I want. I wanting to get close as I can to 900 rwhp on e85. I have everything to make it there except the power adder. I'm debating on...
  16. strong_j

    First time at the track with the new setup

    Finally tested out the new setup at the track except I didnt have enought time to order a set of slick so this is on summer tires. (Warning 60' times may cause vomitting) This was at the ford vs. buick shootout in oklahoma this past weekend. My times were 60' 2.466 2.713 2.666 1/8 9.189 8.960...
  17. strong_j

    How many degrees can u put for E85

    My car just made 640 hp and 600tq at 19*. I know with e85 these cars love timing so how much can I really throw at it to get the numbers up??
  18. strong_j

    How to install boost gauge

    Hey everybody I'm over at holywd's place helping finish the vortech install and we're trying to figure out how to connect the plastic line into the gauge.
  19. strong_j

    04 cobra *modded* FS

    SOLD!!!!!! I'm selling my 2004 svt cobra. I just opened up my own business and it involves me to do alot of driving so now i need something more economical. This car is my baby and all the work was done professionally by GearHeads in arlington, all the receipts comes with the car along with...
  20. strong_j

    Best tuning shop surrounding Dallas?

    Okay guys my tuning shop has had my car for about 6-7 months now and all they were doing was a fuel system, nitrous, and tune. The fuel and nitrous were done in 2 months and I think 5 months for tuning is alittle crazy. They have 2 more weeks to get it done before I go and pick it up. I'm...
  21. strong_j

    my shelby gt with comp 127650

    My car is going back to gears heads on monday so i wanted to get one last video before she goes. the mods are mmr 5.0 stroker ported heads comp stg 3 blower cams kooks lt magna packs 3" ported whipple 20#'s zex nitrous http://www.youtube.com/watch?v=fnnj5gh3PIs&hd=1 fnnj5gh3PIs tell me what...
  22. strong_j

    should i go 3.4

    so I'm in some need of guidance for the direction of my mustang (3v) that im building. right now i have a fully built block with a 9.1 compression, stg 3 ported heads, stg 3 blower cams, NITROUS and WHIPPLE 2.3 (steeda 20# pulley setup) (e85 fed) I recently just got offered a whipple 3.4...
  23. strong_j

    [FS] ford racing Cold Air Intake

    -ford racing CAI -has about 15k miles on it -GREAT condition U can pm me or text me for more pics. My number is 972-824-9240 80+shipping
  24. strong_j

    WTB: FR500's (black chrome or chrome)

    I'm looking for some fr500 for my 04 cobra. They have to be black chrome or the chrome ones and preferrably 17's. pls let me know what you have and i'm willing to trade my stock cobra wheels if need be. thx, joe BOUGHT!! PLS JUST DELETE THIS POST!!!
  25. strong_j

    FS: OEM and ford racing parts for sale

    Well I just spent a chunk of money at my performance shop and now I need to recuperate some of it so I'm cleaning out garage and selling stuff I don't need. I'm in Wylie, tx Ford gt fuel pump 115 shipped Stereo system- http://www.s197forum.com/forum/showthread.php?t=45739 dual gt500 pumps...

Latest posts

Support us!

Support Us - Become A Supporting Member Today!

Click Here For Details

Back
Top