Search results for query: *

  • Users: cwhit23
  • Content: Threads
  • Order by date
  1. cwhit23

    Beechmont and Lebanon Ford

    I did some searching but didn't come up with a whole lot. Has anyone every ordered one of their supercharged 42,995 Mustangs etc? Are these legit?
  2. cwhit23

    2014 Roush Stage 3

    Got a chance at 14k miles- Roush Stage 3 car for a decent price.. ( I think) 30k. Anyone here care to give a review of goods/bads or reasons to or not pursue this car? Thanks
  3. cwhit23

    Thinking of 2012 GT500

    So it's been awhile since I've been here, Been out of the s197 world for awhile, went back to Fox body, built a race car, sold it, bought a 68, decided I didn't want it, sold it, and now I'm back for some info/advice from you guys. I've been looking at 2012 GT500's for sale. I really want a...
  4. cwhit23

    ord Racing Mustang 24 lb pound Fuel Injectors Set of 8 w/ EV1 Connectors

    Brand new, never used. Bought them for my fox body but selling the car and no longer need them. Part Number: M-9593-LU24A $225.00 Shipped USPS, only to the lower 48.
  5. cwhit23

    Fox almost done but think I may sell for a terminator, thoughts?

    I have been building a 93 fox coupe for the last year. So not an S197, and also why I've been absent from here, However, The car is not done yet, but I'd say 95%, need to put 5 point harness in, and a few other things. It has a bad O2 I think, needs to be tuned , but in gist the car is a 306...
  6. cwhit23

    Locked SCT X3 and AEM Wideband

    BOTH ITEMS ARE SOLD! locked SCT X3 100.00 shipped. SOLD AEM Wideband. Uego 30-4100 I bought it from a member here and never installed it. SOLD 125.00 shipped
  7. cwhit23

    left over stock parts.

    all parts are gone.
  8. cwhit23

    Procharger P1sc HO kit

    SOLD I bought this kit used from a member here. It shows some wear and the tag is faded. I called Procharger and it is for a 2006 model, bought in 2007 iirc. I never hooked it up on the car. The member I bought it from had it running on his car and sold to upgrade to a bigger kit. As...
  9. cwhit23

    Timing and cam issues

    My car has thrown p0012 code, so I realize it's more than likely a VCT solenoid, or a cam phaser.. Awhile back it threw the code for the opposite bank, replaced the phaser and seems okay.. however under data log both cams are still out of time.. so my questions are: What are the odds of...
  10. cwhit23

    WTB: wideband and boost

    title says it all. Looking for Wideband and Boost gauge EDIT I have obtained a wideband, looking now for AEM boost gauge.
  11. cwhit23

    bugs in rebuild- how much is tune related?

    Build = forged bottom end. NOT stroked. so bottome end is stronger but not build. I have been running a live stream data on the car and here's what I've got.. A rough idle at 1500 RPM's not there before 1500 and goes away around 1700-1800 almost feels like a misfire but not showing up in...
  12. cwhit23

    Procharger P1 12 Rib kit, gauges, injectors, etc

    I'm selling my Procharger P1-SC that I bought from a member here. I never installed due to other circumstances. This kit works with 05-09 cars. Location Johnson City TN: Priced to move 2500.00 you pay shipping This is a 12 rib kit. This kit is pretty much complete. The only thing you will...
  13. cwhit23

    Big Thanks to Jarrod and Latemodel!

    I bought a flywheel from these guys,and I had some clutch issues that followed. and they helped me out in every possible way they could and was willing to do whatever it took to take care of me as a customer. Jarrod was on the phone with me a few times and we got everything squared away. A+...
  14. cwhit23

    Borla Attak axle backs- practically new

    I got these brand new in box. I mounted them on the car, started it in the garage let it run for about 5 minutes. I took them off and they are now for sale. These have never been driven on the car. This just wasn't the sound I was looking for so I'm going with a different set up and need...
  15. cwhit23

    got my motor running car won't go in gear

    Okay, some of you know I've been building putting my car back together with a built motor. Well the day finally came, I got it primed up, leak checked, everything good to go. She fired up and after the normal lash adjuster chatter settled in a couple minutes and the smoke cleared she purred...
  16. cwhit23

    procharger intercooler piping

    Does anyone have a diagram or pic of how this all goes. I bought the kit used and am trying to figure it out. 05-09 car. its a p1 kit
  17. cwhit23

    ATI Super Damper help

    I am plumbing up a procharger with a 12 rib kit, so I had to get the super damper. I'm getting ready to put the balancer on but have a couple questions. I did a search with not much luck so if I missed it, I apologize. anyway the ATI came with a shim, is this needed? it looks like it will...
  18. cwhit23

    Priming the motor

    I searched and found one good write up of a guy who did it with a bug sprayer, which may be what I end up doing, but has anyone pulled the plugs and bumped the motor until it built oil pressure? I'm parainoid of this no matter which way I go,I'm afraid it'll jump time. Any suggestions, or easy...
  19. cwhit23

    o ring help / part number

    I need the o rings that go on the block where where the heater hoses connect. The are behind the valley and under the intake. There is two o rings about dime size. I went to my local Ford dealer and they couldn't find the part- these are the inlets dead center behind the water pump.. it's on...
  20. cwhit23

    Pro Dyno in SC ? others?

    Anyone use these guys? I'm looking for someone that can dyno tune a f/i car. The guy I had planned on using left the business. So I'm back to either an email tune, which I really don't want for f/i. or traveling some distance for a tune. Pro Dyno was recommended to me else where. So ups and...
  21. cwhit23

    Vendors! 8 Bolt Flywheel, possible clutch

    I have an 06 GT that I have rebuilt the bottom end. I have an Eagle Crank and now need an 8 bolt flywheel instead of 6. Throw me some options and prices. Possibly will replace clutch and all. Even though I don't need a clutch at the moment, while it's down, if the price is right, I may go ahead
  22. cwhit23

    it never ends

    I've been working on gettting my motor rebuilt since April... Well I bought a crank off of here, had it balanced and everything looked okay, until I finally got everthing together, start checking clearances and everything.. well, there's about 40 thousands worth of slop in the crank.. It's...
  23. cwhit23

    Stock Pistons, Rods, Bolts Ready to put in

    These are all marked and matched ready to go. I had them machined and reconditioned as I was going to use them when I rebuilt my car but I went with Forged instead. Also, brand new bolts and clips, never opened. I think these had about 50k on them when I got them, they were not hurt at all, I...
  24. cwhit23

    Steeda UDP's

    $150.00 shipped to the lower 48 - you cover pp fees. Located: Johnson City, TN Ran these for about 10k. No issues whatever. A few scratches and dings, but no issues with the pulleys. I am just selling them because I wont' need them with boost.
  25. cwhit23

    sony xplod 6x9 3way 300 watt

    New never used them, but took them out of the original box and it ended up getting tossed. Location: Johnson City, TN Price: 60.00 Shipped to the lower 48 SOLD

Latest posts

Support us!

Support Us - Become A Supporting Member Today!

Click Here For Details

Sponsor Links

Banner image
Back
Top