Search results for query: *

  1. hazzardoustoysjr

    valve spring replacement

    That's a good tip, no need for phaser bolts if I don't take them off thank you and yes I agree I was a little worried about using the wedges and god forbid somethings moves and I'm not aware
  2. hazzardoustoysjr

    valve spring replacement

    Thanks for the input guys, I think im going to pull the timing cover and do it properly.
  3. hazzardoustoysjr

    Cam or no cam?

    its a safe bet its stock cams
  4. hazzardoustoysjr

    Cam or no cam?

    I cant listen to the clip right now bc I'm on work computer but what other mods does it have? full exhaust? cold air etc. chances are if everything else is stock it doesn't have cams..
  5. hazzardoustoysjr

    valve spring replacement

    Thank you, so you think I would have less time in pulling the cams then trying to do it without it
  6. hazzardoustoysjr

    valve spring replacement

    I honestly do not have a good answer, I know the boost was bumped to 15psi because the new engine was set up for lower compression. According to my tuner he believed it was valve float because power fell off at 5500rpms but boost pressure went up. They are stock springs with around 75k miles
  7. hazzardoustoysjr

    valve spring replacement

    long story short my single turbo 3v floated the valves on dyno around 5500 rpms and I was told I need to replace the valve springs. something I wish wasn't overlooked when I had the motor out but either way. Many mistakes were made along the way, listened to bad information and built a low...
  8. hazzardoustoysjr

    3v throttle body, cold air intake, married sct

    I have a bbk 62mm throttle body for sale, I bought this new from American muscle for my car for my first build and ended up not using it I'm asking $250 plus shipping I also have a k&n intake, it came with my car in a box. ive never used it and I do not know if the mass air sensor works or not...
  9. hazzardoustoysjr

    turbo build, stock cams valve spring suggestions

    hmm, if I wasn't blowing all my pennys on this new build I would consider that lol. maybe in the future I would be interested if you still have it. I want to make 700rwhp ish and daily it allot.
  10. hazzardoustoysjr

    turbo build, stock cams valve spring suggestions

    turbo is a 67mm garret, and I may just leave the stock ones in it at this point. I just want to get the heads gone through and checked before I put them back on my new shortblock
  11. hazzardoustoysjr

    turbo build, stock cams valve spring suggestions

    sweet, thanks. what about the valves themselves? are they a weak point I should replace or are the stock ones okay?
  12. hazzardoustoysjr

    turbo build, stock cams valve spring suggestions

    hey guys, so im in the process of rebuilding my shortblock and will be using headstuds this time and running more boost. The heads have never been touched and I would like to install new valve seals and springs. does anyone have good recommendations as far as what I should use for valve springs...
  13. hazzardoustoysjr

    WTB: Pypes or Other Off Road Pipe 05-09

    i have an off road x pipe, either pypes or bbk I cant remember for sure. ill take 90 for it plus shipping. I don't get on here much my cell is 302-542-0396 just shoot me a text if interested
  14. hazzardoustoysjr

    Mustang is still smoking, help with ideas

    It does consume some coolant at times and oil, I assumed the oil had to do with the turbo issue. ive done a c02 sniff test and that came back negative for a head gasket.
  15. hazzardoustoysjr

    Mustang is still smoking, help with ideas

    Thank you all for the responses, Jeremy H you just taught me more about turbos than I thought I would ever know lol. So yesterday I unbolted my hotside and ran the car with the charge tube going to the throttle body disconnected so it was drawing air directly through the throttle body and...
  16. hazzardoustoysjr

    Mustang is still smoking, help with ideas

    Hey everyone, I haven't done much with the car in a while so my inspection is up my tags are dead and if anyone remembers my car from before ive had a problem with it smoking at idle and while driving since I put a turbo kit on my car. ive had the turbo gone through by someone who is supposed to...
  17. hazzardoustoysjr

    Moving Kenne Bell; Stock 4.6 to B326

    I have blown two 3650 on the street with 603 rwhp in less than two months apart
  18. hazzardoustoysjr

    17x7/15x10 Polished Racestar Wheel Package *Like new condition*

    would you be interested in selling just the rears?
  19. hazzardoustoysjr

    Boston S85 Speakers - Pair

    are these better than what comes with the shaker 500 system?
  20. hazzardoustoysjr

    turbo cams

    im not to concerned with it being the best application but I don't want to hurt the power by any means. and I would prefer more lope than not. any videos would be great!
  21. hazzardoustoysjr

    turbo cams

    are those cams for a blower or turbo? and they sound pretty good. bruce i really do not know that much about the way a cam should be set up for each application. i do not want to hurt the power i am at in anyway and would honestly like to bump it up a little bit. but like i said in the first...
  22. hazzardoustoysjr

    turbo cams

    im in the market for some turbo cams but would like some input. im at a point where im considering trading my car in for a newer 5.0 or throwing a little bit of money at it to hold me over until the 15s come down in price a bit. i love the old school sound of a cammed car. i realize running a...
  23. hazzardoustoysjr

    15x3.5 and 15x8 Direct Drill Race Stars w/tires

    I am interested in the rears
  24. hazzardoustoysjr

    Huge Sales at LethalPerformance.com - This Labor Day Weekend!

    is there a code to always get a discount through leathal? about to order a clutch from spec
  25. hazzardoustoysjr

    WTB 2005 - 2009 Axle Back

    i have a set of roush mufflers. need to be cleaned up. text me at 302-542-0396 if interested

Latest posts

Support us!

Support Us - Become A Supporting Member Today!

Click Here For Details

Back
Top