Search results for query: *

  1. A

    Spinning up a 4.6 to 7500rpm

    What about the other gears in the equation? What is your second gear ratio, can you put in a TKX with a second ratio to get you a couple more MPH. Or change ratios in your 3650? Maybe not at drastic as a rear end change. With everyone swapping to a Coyote or LS there has to be a stroked 4.6...
  2. A

    Do you name your car

    My 08 GT is Sangria, sometimes when looking up the paint code for Dark Candy Apple Red it comes up as Sangria. Joe Combs, What bumper cover is that, I need a new one. GT/CS or Convertible cover?
  3. A

    S197 Rotor Slop / Clunk

    Glad to hear you found the real cause. If your rotors are moving so is the wheel and that is not safe. The clamping force between the wheel/rotor/hub is what prevents movement, the studs are just there to provide the force needed with proper torque applied. I'm not sure about pin drive wheels...
  4. A

    Grinding and clicking noise

    My loud clicking noise was a TMPS banging around on the rim. Only made noise at low speed.
  5. A

    Finally got GT500 rims on

    What year are those rims from?
  6. A

    Mustang Truck

    I like this. Probably in the minority here but I like the back better than the front.
  7. A

    Strong Clutch Smell. Gradually Lost All Gears

    I think the part where you noticed it wasn't pulling would have been a good time to lift. A slightly slipped and now weak clutch will get you by for a while. Your clutch is now toast, it doesn't take long to kill one even a fresh one if left to slip.
  8. A

    Grey Mare is back home in the stable!!

    Nice setup! The prestolok fittings on the BOV are ok but I would change the tubes from nylon to ezbend copper or stainless, it looks like a weak point.
  9. A

    07-09 GT500 Front Control Arm Upgrade Question

    I will probably end up with these some day also, good to know how they are fabricated. One of my jobs was to design and build weld destruct fixtures, while also setting up the welders. You would be amazed how strong a good weld is, and also how bad a good looking weld car be. Trailers have...
  10. A

    07-09 GT500 Front Control Arm Upgrade Question

    These cars have struts, so the ball joints job is to locate primarily in the X and Y direction. Z or up and down there is little force other than what it takes to deflect the bushings. Those are plenty strong, mild steel doesn't just snap. The stock ones are a thin stamping that is flared...
  11. A

    Does that 4.0 T5 have a removable bell housing? A guy on another forum may want it and he is...

    Does that 4.0 T5 have a removable bell housing? A guy on another forum may want it and he is in PA.
  12. A

    What's it worth?

    Plenty of interest from the engine swap crowd. T5's are great for use behind other 4 and 6cyl engines. Where are you located? An adapter plate away from fitting lots of stuff.
  13. A

    MMR Oil Filter Relocation Kit for the 4.6

    I'll take it. Trying to figure out how to send you a PM.
  14. A

    S197 GT owners: What’s it like as a daily? Coming from a New Edge GT

    I went from a 92 GT to a 2008 GT, even with frame ties on the 92 the 08 is ten times stiffer chassis. This means a better ride and handling in fact almost everything about the car is lightyears ahead of the old Fox Chassis. Only drawback it needing to rev it a bit more to make it move, the...
  15. A

    Thoughts on This Suspension - 2007 Mustang GT

    BMR theory seems to be, heavy springs with light sway bars. Steeda, lighter springs with heavier bars. One may ride better than the other, I went with Steeda springs, sway bars, CC plates, and Koni Yellow adjustable dampers. Very pleased with them. Call and talk with Rod. I set my dampers to...
  16. A

    What's YOUR local track?

    Grattan in 25 minutes away and Gingerman is one hour away. I prefer to run my HDPE at Grattan, it's like a cross between a roller coaster and a racetrack, lots of fun. Gingerman is more forgiving and the closest track that hosts 24hr Lemons racing so usually two races and an HPDE there per year.

Latest posts

Support us!

Support Us - Become A Supporting Member Today!

Click Here For Details

Sponsor Links

Banner image
Back
Top