Search results for query: *

  1. Andrey Sidorov

    S550- 6 piston Brembos on 05-14 GT Guide (affordable)

    Hey, thanks - so the spacing on the s550 rotors is different it wasnt designed for s197 platform, so you will need washers to push the caliper a bit out so it fits on the rotor and wont rub on it all the time. I dont know the exact spacing because i never tried to put washers on , but i can...
  2. Andrey Sidorov

    Looking for a hood for 05-09 cowl or ram air

    Hey, looking for a hood cowl, ram air or cobra r for 05-09 - color doesn’t matter (it’s getting wrapped) but has to have no cracks , scratches don’t matter. 2 hour proximity from Philadelphia, if anyone has one for sale let me know
  3. Andrey Sidorov

    tire review help

    Running g2s on the front and MT Street comp on the rear, love them both, never issue with traction at almost 500 rwhp, rain is good if you dont do dumb stuff, but god those g2s on the front are like riding on wooden blocks - by far the roughest tire i rode on, thats the only downside
  4. Andrey Sidorov

    Procharger rebuild recommendations?

    Hey lads, the outer seal on my p1sc started to leak on the ground , looking into the places for a rebuild, anyone used any or have any recommendations?, besides procharger itself, that’s last resort cause they want like 1600 bucks all in to do a rebuild
  5. Andrey Sidorov

    Tub the 05

    It depends on the offset , i ran 315 on +22 on the rear and my quoter did not like it, so im not sure if you can run bigger lol
  6. Andrey Sidorov

    Ticking Sound

    That guys youtube is amazing and he has plenty of videos of that job done, that said - at 115-120k miles, on our 4.6 3v its about time to do the timing job due to stupid design of plastic tensioners with rubber gasket that starts leaking and oil doesnt go all the way into the head add melling...
  7. Andrey Sidorov

    Ticking Sound

    If the noise is there both cold and hot engine and also increases with rpm - most likely Roller Follower in one of the heads depending where sound is coming from, if when engine is cold only and doesnt increase with rpm - cam phaser. One way or another have to drop valve covers and check for...
  8. Andrey Sidorov

    Mass Air Flow (MAF) issue, I’m stumped

    When you disconnect maf before car runs or even during - the ecm goes to fail safe mode right away (limp)- it will disregard the readings of your sensors and will run on preprogrammed settings - so it makes sense it will stay running, but it doesn't prove its your maf So i ate a dog on this one...
  9. Andrey Sidorov

    Coil packs & temp plugs

    My car is tuned by Lito, i had brisk plugs from day one of the tune
  10. Andrey Sidorov

    Coil packs & temp plugs

    Im confused on why you need temp plugs, but here is my input... Buy oem coils only, trust been there, have a set of msd street fires in my storage now, and car did not like them whatsoever. Have no idea why but our 3 valves only love oem coils, and there is 0 reason to upgrade besides looks As...
  11. Andrey Sidorov

    S550- 6 piston Brembos on 05-14 GT Guide (affordable)

    Hey , this is for Gt performance pack 6 piston brembos, I’m pretty sure 2022 gt500 uses different brakes, so it won’t work , check online if they are different brakes
  12. Andrey Sidorov

    Need some part numbers for 11-14 steering wheel assembly

    Hey guys im looking to purchase carbon fiber steering wheel from 2014 and install it into my 06 with dynawin unit that I already have and saw instruction for wiring but since carbon wheels come bare without anything, Ive heard i would need the new U bracket that holds airbag and horn assembly...
  13. Andrey Sidorov

    How to Install a 2010-2014 Mustang Steering Wheel into a 2005-2009 Mustang

    Want to do this project soon, im looking to purchase carbon fiber steering wheel for 2014 and install it into my 06 with dynawin unit. Ive heard i would need the new U bracket that holds airbag and horn assembly right? anyone knows the part number for that?, also i would need the harness wiring...
  14. Andrey Sidorov

    LITO where are you???

    Everyone has different expectations, i never had a problem with my tune or response time
  15. Andrey Sidorov

    06 roush runs extremely rich/ barely starts

    Sorry, i blew the motor soon after, so i actually never found an issue, it was on and off, i suspected some air leak downstream of MAF, cause i had that same thing happening when i blew off the clamp holding throttle body coupler
  16. Andrey Sidorov

    Hello to all!

    :highfive:Welcome!
  17. Andrey Sidorov

    Valve cover breather

    yeah i capped intake and the hole in the intake filter pipe
  18. Andrey Sidorov

    Valve cover breather

    metal in the can? you sure its not the metal from your top end? as to the question, no you dont need additional tuning, i run breathers on my covers as well as on oil fill cap - i did not remove the pcv from the valve cover. The only downside is that the oil cap filter will get milky a bit if...
  19. Andrey Sidorov

    Front Suspension Help Needed

    So the lca ball joint isnt really the issue here, you can slowly hammer it out after loosening up all the lca bolts, and then use the large fork looking pry bar from autozone or something, its going to be springy (if that is even the word) and you pop the joint out. The real pita is to take the...
  20. Andrey Sidorov

    The Jalapeno, our 2005 GT build thread

    Cool to see the whole story of the car all the way from 2013, wish i would do something like that (or maybe not cause then i will be shocked how broke i went :D lol) Keep it coming !
  21. Andrey Sidorov

    2005-2009 Mustang GT turbo kit options and needs!!

    Very daily friendly setup, the way procharger works is somewhat similar to turbo excepts its belt driven, you dont see max psi until you at 5500-6k rpm range - it is not trying to kill you in low rpms and feels like a stock car at 1500-2k range regular driving
  22. Andrey Sidorov

    engine light flashing under hard acceleration

    Light flashing means only one thing - misfires, i would suggest not test your luck and not drive the car, the codes should be stored, can be multiple things from plugs and coil packs to low compression
  23. Andrey Sidorov

    2005-2009 Mustang GT turbo kit options and needs!!

    I used to daily it for 2 years until first motor decided to spin the bearing (i bought the car knowing that the motor was not in the best shape and price accommodated that) , then i chose a 'wrong shop' to put the new motor in and they screwed up with timing install big time, so right now im...
  24. Andrey Sidorov

    The PIC WHORE CLUB!!! Knock before you Enter!!!

    Cars look great!, do you mind me asking if its a two inch cowl or 3 and from which brand?, looking for a hood replacement since every time it rains it's a swimming pool underneath mine
  25. Andrey Sidorov

    2005-2009 Mustang GT turbo kit options and needs!!

    Good luck with the goal, i think its doable depending on what bolt ons your buddy runs- 2 things i will point out - on stock block you cant go above 450 torque level or you are really risking to send your rod out of the block, second - your rear suspension setup including gears and wheel/tire...

Latest posts

Support us!

Support Us - Become A Supporting Member Today!

Click Here For Details

Sponsor Links

Banner image
Back
Top