Search results for query: *

I installed the complete assembly with pypes long tube headers, no hood, removed the radiator assembly slid right in . I didn't touch the steering. The intake should be removed and I did use a leveler. Get a helper, it makes it easier and you have someone to drink beer with when you're done!

I ordered the Russell fuel line. From Russell/Edelbrock took 3 months to get it. I ended up just buying the hose and fittings from Summit but at twice the cost. I found it easier to remove the left fender well and ac condenser to access the fuel line. I have the Russell line if you are interested.

What needs to be done as far as the pcm for a manual swap?

What is a good option for a replacement automatic transmission?

Update on the swap. Other than a few minor issues, the swap was actually pretty easy. Having ALL the parts is definitely a plus. Would I do it again? Maybe , maybe not. If I was doing it for myself probably not. Doing the project with my son definitely would do again. I would like to send out...

Ok, sorry for the late reply. It was the crank sensor. It wasn't pushed on all the way. Thank you all for the help!

I just pulled the same powerplant out of my son's car. The harness is intact. I can take a few photos if that would help.

I installed the the key and ignition tumbler that matches the pcm installed with the gt drivetrain. After doing so the pats light quit flashing. I did not program the keys. I have a company building a tune that will disabled pats. Hoping that will solve the issue. The injectors are brand new OEM...

If you are using old r134a lines or components with your new r1234yf system, I would recommend flushing the entire system if using the 1234yf. the oils are similar but not compatible.

I am having an issue with voltage to the injectors. 07 my. I checked the grounds and fuses but no power to the injectors. I checked them with a noid light, I do have 12v to the red wire at injector. I have 12v to other wire and when cranking it drops to around 6-8 v. It will fire on starting...

Can anyone point me to a post or link that can help me out with connecting an aftermarket driving light/halo grill? My son has the basic 07 mustang and wanted the supplemental lights with halo in the grill. There is no fog light option on his light switch. I picked up a switch with fog option...

I don't live near the desert so that wouldn't interest me. My Bronco has gone through anything I have run it through. For $30k I can buy a Can Am Maverick beat that and still have my Bronco to tow it home. I would not trade my Bronco for a jeep ever.

My experience with 10% ethanol fuel. It will attack certain plastic and rubber parts. It will corrode aluminum and steel. I have replaced every rubber/plastic fuel system part on every small engine I own. You can't leave it in a steel tank too long because it will rust the inside. Aluminum...

Things are rough all over. I ordered suspension parts for my truck in early October 2021, supposed to be here by the end of the month...........L..G..B...

I just replaced the sjb in my sons 07. Plug and play. Everything worked like it should. I did order the same part number if that makes any difference.

Save yourself some trouble and replace the sjb. You can send yours out or buy a good used unit fairly cheap. Your sjb has obviously been exposed to water. I would find the leak/leaks to prevent further issues.

Vorshlag-fair, thank you for pointing out the pitfalls of a swap like this. My son is going to drive this as a v6 through next summer. We were planning the swap for next winter. Who knows maybe I will find a GT with a blown engine cheap and this swap won't happen. In the mean time I want to...

Thank you for the reply. The car and the donor parts are both 07'. I have the GT complete drive train from crank pulley to differential. Both are ABS. I have the complete front subframe with power steering and master cylinder still connected. I have both pcm's. I have the complete GT dash w...

Hello, new to the site. I looked around but could not find the answer. I hope you can help. I purchased an 07' mustang 4.0 manual shift for my son. The guy I bought it from had a complete 07' GT 4.6 auto set-up. My question is, will the GT auto pcm mate with the car? I have the column...