Search results for query: *

  1. 4

    '05 GT - Blower motor only one speed.

    so, funny story, i had a faint of doubt (not sure if this is a correct grammar) on the climate switch and decided to take a look before i went down to a junkyard. i took off a few dash board pieces and got to it and to my surprise, the wire to climate switch was plugged off! what a finding! all...
  2. 4

    '05 GT - Blower motor only one speed.

    Hi there, I'm having the same issue. I've changed my blower & resistor and it only works on level 1. I'm going to try replacing the selector switch and update yall.
  3. 4

    clutch master cylinder ring has a play. any idea on shimming the ring?

    hello there my 2005 Mustang the clutch master cylinder has a play. I have included a video to explain what my situation is. My clutch master cylinder itself is not leaking and it's working properly. the ring that is attached to the end of it where it gets connected to the clutch pedal, I believe...
  4. 4

    New throw out bearing with whole new clutch kit, Rattles

    yes. alignment tool was used and even if it wasnt i heard it should align itself when the clutch is pressed in, making the clutch plate free of pressure. I didnt want to measure and shim it but i guess that is what is needed. thank you for your input.
  5. 4

    New throw out bearing with whole new clutch kit, Rattles

    wow, i didnt know my post was this gibberish when i wrote it last night. my apology gentlemen. i used Luks kit. it includes flywheel, clutch disc, pressure plate, and throwout bearing. it says to use all luks as they are designed to work together. it is supposed to be an OE replacement. my...
  6. 4

    New throw out bearing with whole new clutch kit, Rattles

    Hi, I just changed the whole clutch system with throwour bearing. I bled the system with vacuum and test drove it. I have a clutch out for the use the clutch there is a little bit of rattle coming from the transmission and when I have clutch in the sound goes away, so what I think believe is...
  7. 4

    Shift Linkage

    i was trying to tighten the bolt today and i broke it. looked up online, only place that sells is ebay for $200 :( junkyard for sourcing. i am having a great moment working on this part.
  8. 4

    Shift Linkage

    yea removing that bolt was a pita for me. i tried days trying to get that one bolt off, it is a bolt that has thread on top and the rest is a pin. for some reason after i undid the thread it was stuck not coming out. i ended up using a chisel type flat screwdriver and hammered it away many times...
  9. 4

    Camshaft bearing surface shows dimples.

    ok. ill try to look for thicker viscosity level oil. never seen anything like that before though. thank you all for the input. i hope to finish this build in a few weeks
  10. 4

    Camshaft bearing surface shows dimples.

    whats the reason behind not getting API SN PLUS? i thought they were the standard in motor oil and most of all oil companies have that mark on them as a certification.
  11. 4

    Camshaft bearing surface shows dimples.

    what are non ford spec oil? this one uses 5w-30 and ive been using mobil1 full synt. Should i get thicker oil?
  12. 4

    Camshaft bearing surface shows dimples.

    Hi. My cam bearings on 4.0L SOHC V6 shows spots of sharp dimples. they are like grain of sands that took some bearing out. i feel them with fingernails. they catch. however there is no scoring marks. everything smooth with thumb going around. so surface adhesion to camshaft is working i think...
  13. 4

    Doing Timing Chain.. Rear Jackshaft Bolt Wont Come Out…

    bought a Torx Plus. It didnt fit. I was devastated. just like my previous problem when a bolt is stuck, I heat it up really hot and use an impact to to zing it off. First try didnt work, was about to give up but I said one more try… it worked The regular T55 worked
  14. 4

    Doing Timing Chain.. Rear Jackshaft Bolt Wont Come Out…

    Using Harbor Freight Pittsburgh T55 Torx head. It fits pretty snug and tightly... just no bite like all the way but it still turns, not strip. Never heard of torx plus... I thought it was just regular T55
  15. 4

    Doing Timing Chain.. Rear Jackshaft Bolt Wont Come Out…

    Hello there, I am trying to remove the timing chain components and the rear jackshaft bolt is in pretty tight. I tightened the front jackshaft pretty tight. wasnt sure of torque just hand tight about 50-60 ftlb. and i used an impact to remove the rear and what it does is that rear bolt spins...
  16. 4

    Rocker Arm inspection

    Hi there! I just got to see my rocker arms. They have a bit of movement side to side and i could try to twist it and it moves a tiny bit. Im wondering if this is normal state for the arms as all my arms are moving like that and the gaps seem to be uniform. Wanted to get check to see if they...
  17. 4

    05’ V6 4.0L Camshaft Lobe question

    Thanks for the suggestions. I am replacing pump and probably reusing the camshaft.
  18. 4

    05’ V6 4.0L Camshaft Lobe question

    i took the engine out to do timing chain guide replacement. im changing out all timing components and while im at it, im changing all gaskets. 1 coolant hose. im wondering if i should do oil pump change also…
  19. 4

    05’ V6 4.0L Camshaft Lobe question

    The first picture score mark is pretty visible. Would you recommend replacing the cams w/ followers?
  20. 4

    05’ V6 4.0L Camshaft Lobe question

    Hi! I opened up my valve covers and got to see a cam for the first time in my life. they seem healthy but I wanted to get better look at my cams by experts. I see some strips along the lobes. are those indication of wear on rocker arms? just want to make sure they are good. Thanks!
  21. 4

    Trying to remove engine, not coming off even after all bolts are out.

    wow.. you guys.. I finally got it! 86GT was right. i went back to sq 1 and started again. bolted driver side down to have engine mate to trans. this time i removed from passenger side first. still stuck. the engine is detached and removed. it was the stuck dowel pin on passenger side! fooqing...
  22. 4

    Trying to remove engine, not coming off even after all bolts are out.

    i used a jack to support the trans in case it fall and it raised more than half an inch from that. still not coming off
  23. 4

    Trying to remove engine, not coming off even after all bolts are out.

    its weird because the driver side seemed to me removed but passenger side isnt. i actually sprayed the stuck side with PB blaster to see if it will help. seems to be rust stuck there. its a manual so i took bell housing bolts, starter out, exhaust bolts and engine mount bolts out. going to give...
  24. 4

    Trying to remove engine, not coming off even after all bolts are out.

    Hello there, Can someone please help me? I am about to cry and give up on taking my engine out! I removed all bell-housing bolts and related bolts to remove the engine. I hoisted the engine and pulled, it would not get pulled out! I went under to see and it seems the driver side is coming...

Latest posts

Support us!

Support Us - Become A Supporting Member Today!

Click Here For Details

Back
Top