Search results for query: *

  1. Low Dogg

    Coyote Engine Swap... 2014 for 2015

    I actually think Ford is playing down the power numbers on the 2015 Coyote. It is almost identical to the boss motor minus the intake. With better flowing heads, bigger valves and cams, an it only gains 15 horsepower? Doesn't add up. I think with a Boss intake and a tune, we will be...
  2. Low Dogg

    Coyote Engine Swap... 2014 for 2015

    I was just thinking, with all the improvements made too the 2015 coyote engine, how hard would the swap be into a 2014 GT.... I know you will need to swap the intake, to eliminate the charge motion plates, an a tune to deal with the mid-lock cam phasers.... But it seems like it would be a...
  3. Low Dogg

    Auburn 31 spline for 2006 GT

    They are also not rebuildable.....
  4. Low Dogg

    Possible problem with 6R80 trans

    I have a 2014 Mustang GT A6 with less than 12,000 miles. When I installed a aluminum driveshaft, I noticed it had some play in the output shaft of the transmission. Up, down, and side to side, seems about an 1/8 of movement. It makes no noise or vibration, even at 120 mph. Is this normal or...
  5. Low Dogg

    Props to Mike Rousch (Mid Atlantic Performace)

    I just got my tune from Mike at the beginning of January. My car is stock and I wasnt expecting any big performance gains, but I have too say Iam impressed. I didnt realize just how bad the factory tune limited power. Car runs great and has nice firm shift. Highly recommend.
  6. Low Dogg

    2011+ Stock driveshaft

    Anybody?
  7. Low Dogg

    2011+ Stock driveshaft

    Anybody have a stock 2011+ Gt driveshaft laying around? Wanting to know the casting numbers on front u-joint flange. Should be something like C3-2-831 or something like that. Any help would be great. Thanks
  8. Low Dogg

    10.0's in the 5.0

    What gears are in this car?
  9. Low Dogg

    New PB, Testing Cobrajet IM 11.16@122

    How much of a difference does running E85 make, power wise, compared to 92-93 octane? I would like to get a tune from Mid-Atlantic Performance. I was looking on your website, an didn't see where you sold any tuners. How do I go about getting a tune from you Mike? Looking to get tuner and a tune...
  10. Low Dogg

    World Cup Finals at MIR ***Roll Call***

    On Saturday there was so many oil downs, spent most of the day walking around looking at cars, while they cleaned the track.
  11. Low Dogg

    New PB, Testing Cobrajet IM 11.16@122

    Is this still with 3.15 gears?
  12. Low Dogg

    Driveshaft Length

    I will try to get some pics tonight. Its the same setup as the Spydershaft, just cut to a different length.
  13. Low Dogg

    Driveshaft Length

    Ran the car yesterday, picked up a tenth... 12.93 @ 109
  14. Low Dogg

    Inner tie rod questions

    When I did mine, I just used zip ties. Worked like a charm.
  15. Low Dogg

    A6 transmission output flange bolt pattern

    3 3/8" × 3 3/8" on center
  16. Low Dogg

    Driveshaft Length

    Yes... Mason Dixon is 20 minutes from my house. Start to finish, this driveshaft cost me $396 to build... Had the car up too 110mph today, everything seemed ok.
  17. Low Dogg

    Driveshaft Length

    Driveshaft finished and installed.... Testing next weekend, due to local track being closed for bracket finals.
  18. Low Dogg

    Driveshaft Length

    Just to let everybody know... If you replace the factory rearend driveshaft flange, with the older style rearend driveshaft flange (Part# E9TZ4851A), with the weight of the car on the suspension it measures 56 3/4" flange to flange. This is on a 2014 Mustang Gt with an automatic transmission...
  19. Low Dogg

    A6 transmission output flange bolt pattern

    Anybody know, what the bolt pattern spacing is, on a A6 transmission output flange? Iam thinking its 3 "x3" on center. Can anybody verify. Thanks
  20. Low Dogg

    why cant we make a driveshaft

    Anybody know the length needed to build a driveshaft?
  21. Low Dogg

    Driveshaft Length

    Anybody know the stock driveshaft length?... Extended and compressed, flange to flange or u-joint to u-joint. Thanks for any help
  22. Low Dogg

    My V6 -> 5.4 Swap.

    So what was the dyno #'s......
  23. Low Dogg

    First look: 2011 5.0L Clutch Assembly & Shifter

    Would that clutch bolt to a 05-09 Flywheel......For tranny swap....
  24. Low Dogg

    WMS Gutted cats, MMR CAI, WMS tune results.

    What track you headed too?
  25. Low Dogg

    Leaking Crank Bolt...

    I put on underdrive pulleys and forgot to put silicone in the crank pulley keyway.......What a mess....

Latest posts

Support us!

Support Us - Become A Supporting Member Today!

Click Here For Details

Back
Top