Search results for query: *

ApYBGRiqV4U this was are 4th annual summer cookout. It was alot of fun minus the few ass clowns that have to take it to far. These guys will not be welcomed back.

My crank pully seems to have a slight wobbel to it. I am running the Ati supper dampner along with the ati procharger crank pully. everything i am reading is that there is supposed to be no movment in this. there does not seem to be any damage to my serpetine belt. but it looks like it might be...

what hve you done to keep your IAT's low or lowered them. Spinning my D1 to the max my IAT temps get as high as 180 with a 2nd 3rd gear pull. here is my list so far I am looking into a way to get air from outside to the procharger filter. Cut out the factory hood scoop so air...

Alll of you running big boost 22+ pounds what are you galling ou plugs at . I was having belts lip issues but the car still falls on its face up top I run the ngk gapped at.28. Should the gaps be closed up more .

Procharger guys, what prochrger do you have. What size pulley and belt. And lastly what hole is the free spinning pulley set at. It has 5 adjument holes. I am looking to see where you have yours set along with the other information. How tight do you run your belt.

autometer cobalt boost guage. about 8 months old. With 800 miles with it in car. $60.00 shipped

Hsw plate kit has never been used. only ever mounted the bottle. it has just been sitting in the garage, Mafia was on the car 2500 miles, everything else is brand new. If someone want to take all the n20. $650 and it yours Diablo sport Mafia $Sold Zex single purge...

Washed the mustang up. Figured take some pics of her.

While doing some tuning with eric tonight, I was going up in rpms from 1500, 2000, 2500, 3000, 3500, 4000. The vacuum lin on the bov hit the belt and broke in 2, easy fix. but On the last, i let out of the throttle and the car starts running like ass. Then stalls. Started it back up and it...

gt500 fuel sytem, $525 shipped SOLD KB Bap 40 amp. Brand new. opend for pics. $220 shipped SOLD Spec 3 + clutch and Aluminum fly wheel. Brand new in box, opend for pics $550 shipped Stock fuel rails, Hand polished. $40 shipped SOLD

After a solid week my best freind and i finished my car this morning, i was to be tuned this afternoon. Well with all the changes the car woulnd stay running so we decide to flat tow it the 10 miles. Well got about a mile and my brand new 6060 pops into gear and locks up. I call D&D...

Just installed my 6060. I am now leaking fluid out of the green boot inside the tranny. Have no clutch pedal.

While doing my cam. I was installing the phase limitors. The tool that came with the limitors does not work on the cam gears. I can not figure out how i am now going to rotate the spring now. While trying to do this, i snapped one of the spring also, had to buy a new one. Who here has done...

Stock 3650. shifted great with no problems. has 17000 miles. $550OBO plus the ride. Steeda economy delete plates, They are off the car just still attached to the stock intake. 3000 miles on these $90 shipped Brand New Spec stage 3+ clutch, Spec billet Aluminum Flywheel Opened for the first...

I thought i have seen how to do this on here, but cant seem to find it. I am looking for a step by step on how to time my new aluminator block. I have my stock engine on one stand and the new one on another. i will be taking one part of and then put it on the new one. I am stuck on the timing...

I am in the middle of my build, Looking to make 630 to 650 rwhp on 93 octane. I currently running 60lb injectors. I will also be getting a tune done for 100 octane and shooting for over 700 rwhp, Then to add a little more i am adding a wet plate kit, probably a 75 shot. Now will my 60lb...

Anyone here ever used the procar seats from summit racing. They seem like a good buy for the money, Hers is a link to them http://www.summitracing.com/search/Brand/Scat-Procar

I have a spec Aluminum fly wheel, it is brand new. I just bought an aluminator so this flywheel will not work. Asking 300 shipped obo

Today i ordered the Frpp aluminator with 9:8:1 compression. My goal is to make over 650 rwhp on 93 oct. Here is what else i will be ordering. Tss oil pump with billet gears I will get all new gaskets from ford. Head will be ported and polished, stage 3 comp blower cams New springs and...

Cant seem to find anyinfo on this. i am looking to run 10s on the stock engine. I plan on doing an aluminator, but really want to see how far i can push my stock engine. Current mods. D1sc procharger Gt 500 fuel pump 3;73 delete plates kook headers / off road h Spec Stage 3+ clutch aluminum...

This video was made by are local form. it is kinda long but a good watch. aVmZ15aDufo

this is a stage 3 + with aluminum flywheel. It is brand new in the box. I bought a house so have to sell some car parts. I am asking $700 shipped, including paypal fees. there will be more parts to come. Please email me [email protected]. Thanks simon

i am not to sure if i wanna keep them. Tell me what you guys think

For sale or trade for a diffrent axle back. I put long tubes and off road h pipe on and these are not to loud. 225 shipped

Video our local board put together of our spring meet. Hope you enjoy. wnyfbody-spring-2010_2018028.htm