Search results for query: *

  1. Racer47

    Radiator Fan Problem

    just a guess here...the fan has 2 speeds, are you getting high speed when you hot wire it? or can you get low speed too. Maybe the car is calling for low speed, which isn't working but high speed does.
  2. Racer47

    Anyone recommend 'Bullitt' wheels for mod on '14 GT?

    How about some Shelby's? $900 with very good tires, ready to bolt on. I'm in Milwaukee and could meet halfway to save shipping.
  3. Racer47

    FS: 2007 Shelby GT $12,900

    The Shelby GT is more like a normal GT with the same 4.6 3V. The Shelby GT500 S197s are all supercharged.
  4. Racer47

    trunk access in 2007 Mustang Saleen PJ

    There is a wire by the front passengers right foot that can used for a trunk release button that I located in the glove box. I don't remember exactly how. It's been years ago but its easy. The instructions are on this site and on The Mustang Source forum. this should help get started, any...
  5. Racer47

    anybody change horns?

    ^^^ agreed https://www.fiammhorns.com/12v-vehicles-without-air-supply/FIAMM-AM80SX-932020Z-12v
  6. Racer47

    anybody change horns?

    If you want it noticeably louder you want 2 horns with different tones. Then run a dedicated higher gauge power wire from the battery to the horn and use the original horn power wire as the switch lead for the relay that you will install by the horns. The stock wiring is always the bare...
  7. Racer47

    08 Mustang with x-charger

    Take the belt off and check all of the pulleys and idlers. Are the bearings good? Are any hard to turn? Are any loose which would also cause alignment issues. Fix any issues. Then buy a new belt, maybe a bit shorter as stated above and see what happens from there.
  8. Racer47

    S197 to S550 Steering Wheel Swap - The Complete Edition - Video Series

    you could have simply worn gloves
  9. Racer47

    Bambi mode lights

    Even if you spend a lot of money replacing the bulbs, the stock fog lights will still be mostly useless due to the reflector and lens design. A brighter bulb will just create more glare in front of you. It won't push more light down and to the sides of the road. If you want good lighting look...
  10. Racer47

    Amazon Log Splitter

    Why does everyone want to be internet famous? Why put in the effort? Is there any money in it for you?
  11. Racer47

    S650 Competition Package wheels on S197

    If you're interested, I'd sell mine for $900 with low mile Bridgestone tires and near perfect wheels. With you being in Illinois we could probably do it in person. I've been thinking about new wheels but I don't really want to ship my current one. Overall I really like the look, but I wouldn't...
  12. Racer47

    S650 Competition Package wheels on S197

    They are Shelby wheels that are no longer in production. I think the non square looks the best 275 front and 295 rear fills in the wheel wells and looks right (at least to me)
  13. Racer47

    Best Brake Swaps Available Rockautos

    Both of the kits you linked use the same caliper which is a brembo copy. The Brembo 4 piston calipers will bolt on directly and need 14" rotors and new brake hoses. The only difference is one link is calipers only and the other is calipers and rotors. Plus you're paying a lot extra for red...
  14. Racer47

    TR6060 swap questions

    There are 2 flywheel bolt patterns. The stock GT is 6 bolt. The GT500 is probably 8 bolt. The pressure plate from the GT500 may not bolt to the GT pressure plate. But I don't know for sure. The TR6060 is a 26 spline input shaft and bigger dia than the stock 10 spline. The throwout bearings are...
  15. Racer47

    WTB: Vorshlag strut tower cutting jig

    I only have this one pic. I don't have my Mustang at work. I started with a smaller hole and made it bigger and then realized I was never going to get what I needed so I added the extra pilot. Most of the oval shape is under the strut tower bar. If I would have added the 2nd pilot sooner, the...
  16. Racer47

    WTB: Vorshlag strut tower cutting jig

    I have one that I've kept but will probably never use again. It has been modified with a second pilot hole so that 2 holes can but cut into a figure 8 shape and then use a hand grinder to cut off the points and make a nice oval shape instead of one excessively big circle. I'd sell it for $50...
  17. Racer47

    Warning beep under panic braking?

    low on brake fluid warning? idk just a guess
  18. Racer47

    S650 Competition Package wheels on S197

    Both of those are more offset than stock, meaning less flush, or more fender gap. 30 mm offset is ideal for 9" fronts. 45 mm will push the wheel in 0.6" farther. It should clear the strut and spring though with only 255 wide tires. You could add an 1/8" spacer to push it out some. Maybe 3/16"...
  19. Racer47

    S650 Competition Package wheels on S197

    they will probably fit but to be sure i'd need the wheel width and offset
  20. Racer47

    Oil temp sensor. Do I need it?

    Its easy. I mounted it to an oil pan bolt with a P clamp. It gets hot enough but I don't drive it in the winter. So I don't know about that.
  21. Racer47

    Oil temp sensor. Do I need it?

    The 05 / 06 oil sensor is needed. It does something in the cal letting it know if the engine is up to temp. I have an 06, changed pans and left the sensor off. The motor never ran full power. I then mounted the sensor on the outside of the pan with the sensor part touching the pan and all is...
  22. Racer47

    Oil level sensors different for 06/07?

    It does something in the cal letting it know the engine is not up to temp yet. I have an 06, changed pans and left the sensor off. The motor never ran full power. I then mounted the sensor on the outside of the pan with the sensor part touching the pan and all is well. I've had 2 tuners and...
  23. Racer47

    Anyone running the Koni Yellow Adjustable shocks?

    I had koni yellows, they were ok overall but very stiff / harsh on the street. I would just buy the non adjustable koni orange to save money. The minor adjustment range for yellow isn't worth the price. Steeda shocks used to be built by koni and maybe still are. If I had to buy again right...
  24. Racer47

    LIGHT WHEELS?

    40-42 mm offset on 10" wheels is the most common for the front of s197s
  25. Racer47

    Seat Belts

    If that doesnt work, I have a front pair from an 09 GT

Latest posts

Support us!

Support Us - Become A Supporting Member Today!

Click Here For Details

Back
Top