Search results for query: *

under 100 miles used. Removed from a Texas Mile Car These are perfectly fine just had to go up in size. Comes with plug adapters as well. $1400 shipped

Was at a private track rental sunday ( royal purple raceway, houston, tx) I was hoping for cooler air but it was not there but the track prep made up for it. On my last outing we had swapped to 3.31's and found out that a gear change was going to be needed. So back in the 3.73's went...

Ok so just getting the car back with the new auto trans and re tuned* The car went from making 635rwhp and 625 rwtq to making* 682 rwhp and 665 rwtq. List of current suspension set up* Front: BMR k member 2007 stock gt500 struts and springs BMR front sway delete bar 15x3.75 race...

Stock blower best 6.9@102 and 10.93@127 New kb 2.8 7.0@103 and a 10.800@131 Let cool down some some adjusted shock setting again and tire psi 6.8@103 and a 10.66@131 So new best of 10.66 baby and I'm still having launch issuse with traction so I do think there is more in it with...

Well I finally finished up my 2.8LC install after the Texas mile. I did run into a few issues that did hold me up for a few days but no biggie. Like to extend a thank you to VAN@REVAN RACING for giving me advice a few times when I had some questions. Even tho I Did not purchase the kit from...

long story short had a coolant leak last night pin pointed two areas. upper outlet port clamp was loose cause a spray.. but the second leak is where iam beating my head .. its steady stream behind the crank pulley/ oil pan seam. i sprayed degreaser all over the front accessory area to get the...

About 2 weeks ago I bought my car in for service for warranty repair of the accessory belt and accessory tensioner as I walked around I got an idea...... Well that idea involved me trading in my v6 for a 2013. 5.0 , why not the daily gas is the same LOL... SO WITH THAT being said I just got...

ok i have a fam reunion to attend aug 4th in new castle, NH but the lady and I are planning on this aug 2nd i sign on leave from TN, fly to newark and meet the lady etd is on the 3rd from North NJ aug 3rd stay in portland, maine and find a nice dinner place ( looking for ideas) aug...

i use the stock 5r55s shifter but i want to do a B&M shifter which Mike @powerhouse said this owuld need to be custom done. The problem i have is the shifts dont line up with the indicator like half way on N you hear a click thats D , if you stick it in D its 2-2 and so forth. I know...

Time for me to do a rebuild On the stock 8.8 Is there a master kit for it I was told my clutches in the diff are pretty shot. That I can just replace those! What has everyone one else done when this is presented to you?

as the title states. only seem to find airbrushed stangs or skulls... looking for a "?" symbol to stick over the tri-bar pony i was told one day some place on the net made them... anyone ever come across it..

headlight switch non fogs 2005-2009 in dark charcoal color please

OK up for sale is my gauge set up i can sell single set up (ie: gauge plus sensor module and sensor module (ie: boost/iat/afr), or 2 gauges or a 3 gauges .. Reason Im selling them is i would prefer something "simpler" these gauges have many features i dont use and at the time i thought I was a...

So i removed my PLX device 3x DM-100's and sensor modules (boost,a/f,IAT) FAST DUAL SENSOR $473 (ebay $399): http://www.compperformancegroupstores.com/store/merchant.mvc?Screen=PROD&Store_Code=FS&Product_Code=170402&Category_Code=Gas AEM Boost gauge $152 ( ebay $144)...

Well last night i walked into a ford dealer and 2.5 hours later i walked out with a new 2013 v6 quick snap shot of options looks like the 101a package and the performance package so 19's and spoiler and the dealer already removed the lower stripe per my request prior to simionz. I get tired of...

Im heading to BG tomorrow for the 12-5 test n tune any other S197 members going.. I cant wait till tomorrow as I installed my purge, bottle heater and bottle gauge today. On the Agenda for tomorrow morning when i wake up is to swap over to the racestar set up and remove any items from car...

well was up at MIR for a track rental and although im having issues with my 3rd gear in the auto downshifting on its own accord at 115 mph speractly i was still able to clock of a new PB. well actually 2 from my previous i have had a long 1.5 days of travel from middle TN to MD then an added...

will any vendors attending NMRA @ BOWLING GREEN be brining products to sell at a dicounted price or just period... i know when i went to atco for that saturday brenspeed had the racestars and several others had products mostly suspenion etc. this is general not really looking for...

just quick post in the morning i will thro up detail there is also a few vid's when i cna link them up i will... ran several times at a better 1/8th mile (music city raceway) previous best was a [email protected] 60" 1st) new best ------ 7.211@97- 1.61 60" . . . . . 2nd) NEW BEST OF 7.14@95-...

i did one of my front skinney's rims to compare thoughts?..

So yesteday I drove from clarksville, tn all the way to Steele, Al to Alabama International Raceway to link up with my tuner to do some adjusting of the tranny controller's shift points and adjust the tune some for A/F. We had made several passes for baselines and the my tuner went to work on...

Vendor's please shoot me a price shipped 37042 looking to buy Monday from someone before i give my business to the mass net we call ..... eBay

So i was at Best Buy and got to thinking is it possible to use one of them new tablets with USB ports or those small Laptop's to use to data log with WIth Live Link 6.3 and Live Load from SCT? This would be to aviod having to tote my bulky laptop that barely stays charged on its own

well after i got it back from getting a few more things done to it ( POSI port, VMP plenum and port stock T.B) i wanted to try it out so my buddy filmed me give it some thorttle vs his MACH 1 with exhaust, intake i think pretty much stock best he has done is a 13.3 its done from a cell phone...

OK heres my issue : I currently have the following done V6- stock setup all four corners (car was base v6 at birth) CHE- 8.8 axle brace, LCA/UCA BMR- K member , Anti squats(welded), Sway bar w/ billit endlinks, front sway delete bar WHEELS- (F)18X8-295/45/18, (R)18x10-305-45-18 *555r's...