Search results for query: *

So long story short. Car is an 07 gt procharged 10 psi. (492/448). To start with I had stock 3650 with 3.73 gears and ran a pretty consistent 11.8-9 at 121 with 2.1 60". Last year switched over to a magnum XL with 2.66 1st gear. Was advised to switch to 4.10's. With that setup I was running...

So I got bored and I'm tired of driving up on blocks to jack up the car. I decided to build an airbag jack. Plus when at the track I won't have to bring a floor jack with me to switch tires. Just tested it out this morning. Lifts the car at 75 psi

So I hot a hell of a deal on a cervini heat extractor hood. Ran into a couple of problems installing it with the procharger. First the expansion tank makes contact. That was an easy fix, cut 1" out of the center of the tank. Second was the pipe coming right off the head unit. So I decided to...

Whats the eta on the sve drag 17x4.5 dark stainless being back in stock. In need asap.

So I have an opportunity to pick up a new set of weld racing wheels (front/rear) with new tires for 1k. Problem is rear tires are 26x10.5x15. I currently run a 28" tall tire with 4.30 gears. The plan for next season was to go with MT et street bias 28x11.5x15. I know this is a hell of a deal but...

So I have the opportunity to buy a complete crown Vic (07) engine for 350. Same yr as my car. All I want from it is the bare block. I'm assuming it's the same block as mine. The plan is to build my motor over the winter as I am living on borrowed time with mine 498 rwhp 465 ft. Lbs at tires...

So long story short. I installed a magnum xl at the beginning of March. First day at the track Sunday before Easter I blew out 2nd gear. So while the trans was out for a rebuild I decided to do an airlift install. Finally got the trans back last Friday and she is back on the road. I'm only...

So I have been trying for several hours to bleed my slave. Followed Ford's process and nothing. Pumped and pumped and nothing. So I removed my braided line from slave and plugged the line from master. I was hoping I would get some pressure on my pedal and still nothing I press it down and it...

As stated in title. Looking for 07 4.6 silicone lower radiator hose. When the sway bar mount broke off my radiator support the sway mount rubbed by lower hose bad enough the cords are showing. Let me know what you have.

So I finished my airlift install last weekend. On Sunday I pressured up the system. 60 psi front 60 psi rear and 150 psi in tank. When I got home today front and rear were still at 60 psi. Tank was at 117 psi. So I just checked for leaks at tank turns out the leak is at the water trap joint...

So while my trans is being rebuilt I have been slowly working on my airlift install. Yesterday I went to remove my left front wheel. It took almost everything I had to remove all 5 lugs after they were "loose". Last time the car was driven was the Sunday before easter(drag racing). The wheels...

Swapped out the stock tr3650 for a magnum xl on my 07 GT. DDS carbon fiber one piece shaft and flange adapter. Shaft has 8000 miles. $900 shipped. Spec 2+ has 12000 miles on it. Been a great clutch. $200 shipped. Pro 5.0 shifter 20000 miles on it. Way better feel than stock. I have the...

So I'm in the process of getting ready to install my airlift system and when I started removal of my left front tire I found this. The sway bar mount broke off of the radiator support. Everything under the car is bmr except for a-arms. Which they are going on during airlift install. Any ideas...

I'm looking for the 90 degree elbow that attaches to the slave cylinder for an 07 tr3650. When I removed the adapter the clip shot off and I can't find it. I'm sure someone has done an auto swap and has one laying around. Let me know what you have. Oem part number is BR3Z7A512A. All I need is...

Buddy of mine is looking for a d1sc for an 06 GTO. ls2 6.0. Let me know what you have or know of.

Just installed n2mb wot box. Double triple and quadruple checked all the wires. During tests before firing up the car the box is not receiving clutch signal. Light blinks like it should when gas pedal is depressed when clutch is pressed it continues to blink. Have since checked both switches at...

Air lift Online vendor ? Has anyone had any dealings with autoaccessoriesgarage.com. the reason I ask it they have the air lift digital kit 95723 for $3250. This week they are having 20% off almost everything. They are only giving 8% off the kit but that makes it 2990 shipped to my door.

Steve, looking for 2007 gt/cs rear bumper 7R3Z-17K835-AAPTM. What kind of price am I looking shipped to 15557.

Long story short. I'm a dumb ass. Decided to put pypes deletes on the car today and the tips were just making contact with the bumper. I figured it would be ok for a quick drive to see if I liked the sound or not. Didn't want to adjust the over axle pipes as they were perfect for the mufflers...

Looking for a new set of BMR control arms (red). For an 07 gt. Dealer says my ball joints are bad so I figured it was time for an upgrade. Non adjustable. Let me know your best price shipped to 15557.

Just put my ave drifts on. A few years back I had purchased some black spline lugs off a forum member for my other black wheels and never used them. They were new and look just like the sve nuts. After installing them you can see some of the cone shape on the wheel it's self. Does anyone have...

Looking for drivers side upper weatherstrip attached to roof for window. Lete know what you guys have. Mine is torn

So it's that time of the year to get the car out of storage. Just change engine oil and d1sc like I do every year before I start the car. Battery has been on the charger for 3 hrs. Unhooked the charger and hooked cables to my truck just in case. At first it didn't even want to turn over...

I miss not having my stb with my d1sc. I have done some searching and all I found worth anything was emay's car but the pics of what he has done don't show up. http://www.s197forum.com/forum/showthread.php?t=29397&highlight=procharger+strut+tower+brace&page=2 Any help would be great

Looking for 4 1" wheel spacers. Let know what you have.