Search results for query: *

Up for sale is my Gen1 Manifold, all hardware will be included with this, few bolts have some rust on them, will include 3/4 fragola ends as well as GT500 fuel rails(these are painted red, but paint should be easy to strip off). In the process of polishing it back up. Some minor surface...

Like title says need fuel rail from 05-10 3v.

So I did a wire tuck and relocated the BEC and PCM under the dash. I had problems before with the fan burning up the BEC and decided to create my standalone circuit. I kept the trigger for the low(DB) and high(LG/VT) speed. However, after the engine hits the set temperature for the fan speeds...

So have searched past threads, not a lot of definitive solutions, but plenty of people with problems. However, both low speed and high speed have burned up the BEC connector. Is it better to replace the connector and fan and keep an eye on it. Bypass Low and High from the BEC or go with a...

Have an amperage leak on my car that I have begun to identify, it's currently sitting at 1.3 amps with the car off, nothing on. I have no radio or a/c in this car. I found fuse 16 in BEC is drawing about 1 amp of that. I just need to know how much current draw i should be seeing when the car...

Does anyone know of where to find a delete panel, Rehegan is the only thing on this forum that I could find who had made them. There are gauge panels out there, but I just need a full blank cover to hide that opening. Anyone who knows of a company that sells them or someone who could fabricate...

I couldn't find an exact answer based upon previous threads. Had an issue pop up while going to a Spartan Race. So my car seems to be boiling coolant out. I got to my destination on Saturday and steam just came rolling out from under the hood. I ran my race, put some water in the car and...

Looking for a 4.6 bare block in reasonable condition.

Selling these 2 wheels that have been collecting dust for quite some time. I would mark them as like new, they have some slight scuffs on them from moving a few times. However they have never been installed and used. 18X9 wheels not sure of the offset on them. However looking for local...

Looking for both front control arms, specifically the metal sleeve in the hydra bushing, mine are shot, so I bought some Poly bushings and need the sleeve and I know getting that sleeve out can be a pain and I cant have the down time.

Trying to resolve the issues with my car has issues with the charging system, last component I am replacing is the battery, especially after this morning, somehow my relay for the Dual 500 pumps worked itself loose and then the car wouldn't start because the battery blows. Being within the...

Had this pop up not too long ago when turning the wheel right, I get a vibration coming through the wheel, as well as through the floor/frame of the car. It definitely coming from the right front tire/area, I have elimanted ball joints as an issue. The vibration would be similar to running...

Have another Walbro 405 fuel pump for sale, this has the pprv deleted. I ran this one in my car before upgrading to the 500 pump setup. Looking for 100 shipped. SOLD[/B]

I have been having some issues with my charging system lately, so I thought I would finally change out the alternator, so I picked up a 200 amp police interceptor alternator. I got it installed, reconnected the battery and my 200 amp fuse popped. I have to guess it would do this if B+ and...

Picking up at Gt500 pump and harness, just need the FPDM to complete it, anyone got one?

I have 2 of these the other is in the car for now as I plan to add the GT500 fuel kit down the line. I used this for roughly 2500 miles, I switched out this pump for the other and I was getting the same problems, it wound up that I am just running out of pump at WOT. Located in Garner, NC...

The other night I had a slight mishap happen with my one of my heater lines, started driving, did a pretty decent pull and turned out on the highway and noticed smoke pouring out from the back end(I was screaming shit faster than what I thought I could), however I thought I popped the motor, got...

Ok I believe this is a fuel issue, not exactly sure, but fairly certain. Ok we had a major issue here with a local bridge that has cut us off from the rest of the Outer Banks, we have to take a 2 hour ferry then drive for an hour to get back to the OBX. However, the other day after setting and...

I need to get started on cleaning my engine off, I live about 50 feet from the ocean and constantly drive where sand gets into everything. Well it is starting to collect on the engine itself. I have tried hitting it with air to get it off, but it only breaks apart the loose stuff and doesn't...

Dug through the search, not thoroughly, however has anyone made an enclosed CAI box, Im looking to lower my IAT's on setup, I will be getting a new hood shortly. Either Cervini heat extractor or trufiber svt hood can't decide yet. However with my underhood temps are quite high, so now I am...

I know this a long shot, but im looking for a BEC.

Brand Spankin new Droid Mini, I haven't even looked at the phone yet. It's a verizon phone. I decided I am going to switch to straight talk, I don't use my phone like the diehards and the only thing wrong with my current phone is a bad battery. $450 shipped

Ok I have been having some issues with this and it has finally hit a tipping point of anger for me, sometimes when I go to start the car, it won't start sometimes it does, I actually had a good week going on where it started everytime for me. However, tonight it took me about 20 minutes of...

I am digging into this fuel issue of mine, I have two fuel pumps here one I received from Jeremy@S&H and one that I made myself. I am using 405 pumps. I have been having problems with the pump maxing out at WOT, I have contacted Bobby about this previously and Lito(who is doing the tuning)...

Any vendors on here that sell them, or any members that have one, also how does the pulley hold up on a supercharged application.