silverhorseGT06
Member
05-09 Pypes Violators (mis-typed 06 in the title)! $150 shipped to the lower 48 and and I'll cover the paypal fees. Already boxed up and ready to ship via USPS or UPS, whichever ends up being cheaper. Located in Aiken, SC, for anyone close enough to pick up.
These were on my GT when I bought it, so not sure how many miles or how long they were on there, but they appear to be in good shape, and sound awesome with stock manifolds and cats! Switched them out last fall for Magnaflows to quiet things down a little after going with headers and high flow cats, and they've been in the shed collecting dust ever since. I painted them black when i had them on my GT, so I sanded them back down and put a couple of fresh coats of flat black VHT Flame Proof paint on them, all ready for install and the on-the-car curing process. Included a pair of nice clamps and about half a can of VHT Flame Proof paint (includes directions for on-the-car curing process) for touch ups after the install.
Why so cheap? Tips are in good condition. Passenger side has a few very small marks on the top edge of the tip from barely touching my concrete driveway when I was repainting them to sell. Both have some very minor discoloration starting on the lower sides and working down, but barely noticeable when installed, and somewhat normal for stainless steel. And both tips are scraped up on the bottom, about half an inch long from road rash after pulling out of a steep incline with the GT lowered, but cannot see this unless you lay down and look up at the bottom of the tips when installed. I also had a muffler shop cut part of the rear hanger on the passenger side and re-weld so the tip was perfectly centered and straight, to match the other side.
I'd still be using these if they weren't so damn loud with headers and high flow cats, at least for me, a guy in my mid 40's. : ) Thanks for looking!
These were on my GT when I bought it, so not sure how many miles or how long they were on there, but they appear to be in good shape, and sound awesome with stock manifolds and cats! Switched them out last fall for Magnaflows to quiet things down a little after going with headers and high flow cats, and they've been in the shed collecting dust ever since. I painted them black when i had them on my GT, so I sanded them back down and put a couple of fresh coats of flat black VHT Flame Proof paint on them, all ready for install and the on-the-car curing process. Included a pair of nice clamps and about half a can of VHT Flame Proof paint (includes directions for on-the-car curing process) for touch ups after the install.
Why so cheap? Tips are in good condition. Passenger side has a few very small marks on the top edge of the tip from barely touching my concrete driveway when I was repainting them to sell. Both have some very minor discoloration starting on the lower sides and working down, but barely noticeable when installed, and somewhat normal for stainless steel. And both tips are scraped up on the bottom, about half an inch long from road rash after pulling out of a steep incline with the GT lowered, but cannot see this unless you lay down and look up at the bottom of the tips when installed. I also had a muffler shop cut part of the rear hanger on the passenger side and re-weld so the tip was perfectly centered and straight, to match the other side.
I'd still be using these if they weren't so damn loud with headers and high flow cats, at least for me, a guy in my mid 40's. : ) Thanks for looking!
Last edited:
