Custom make CAI tube for turbo feed?

[Makdaddy]

I am not in love with the on3 Cold side into the TB
It just looks CHEEEZZZYYY
Plus it seems to be tooo short to the down hole on the fender.
Just overall a real shitty fit


Im thinking about modifing my old CL intake with maybe part of the ON3 Cold tube
has anyone down anything like that?

 

[Weou09]

If your pipe is to short you probably have your intercooler to low. Mine fits perfect.

 

[Makdaddy]

If your pipe is to short you probably have your intercooler to low. Mine fits perfect.

Hmm I can pull the bumper and double check
The total length of the pipe seems to be just a tad short
Kinda pulling toward the center of the engine, from the fender opening.

But even with the intercooler higher. Im not sure it will stretch the pipe?

But Ill try and get to that after the drive way is finished.

 

[Weou09]

Mine originally was hanging on the wiring harness that goes to the abs block. I zip tied the wires back a little so the pipe would sit closer to the block without it having to be pushed over.

 

[Makdaddy]

Mine originally was hanging on the wiring harness that goes to the abs block. I zip tied the wires back a little so the pipe would sit closer to the block without it having to be pushed over.

OK I gotta take the bumper off anyway, for headlight work
Ill look at the cold side again and see if I cant square it all up