Do Ford Performance head bolts require anti-siege, Thread lock, etc?

[Shakn68]

Installing my heads using the Ford Performance M-6067-3V46 head gasket and bolt kit (Not Studs). Do the bolts go in dry, or use anything like thread locker, anti-siege, etc.
Please advise,

 

[msvela448]

No thread locker... No anti-sieze... Just use some 30 weight oil on the threads and under the bolt head.

It is VERY critical to follow the torque / tightening sequence though... and I recommend using a degree measurement device for the TTY bolts. Like this: https://www.ebay.com/itm/2850854486...Bp6iHMJGlPXUAdpOm60NGsq-2G0U01R4aAlMDEALw_wcB

If I recall correctly it's something like you take them up to 30 ft. lbs. in sequence, then 90 degrees in sequence, then another 90 degrees in sequence.



Sent from my SM-N986U using Tapatalk

 

[Shakn68]

Good Info,
TY msvela448