First run 11.96

mustangtcs

Member
Joined
Oct 11, 2011
Posts
317
Reaction score
0
Location
Pennsylvania
Here it is I went to Atco today and ran my car for the first time and also my first time on a track. My mods are Kenne Bell 2.6 8 lbs. Aluminum driveshaft, 4.10's, 275/50r15 M&H Racemasters, BMR lowers and relocation brackets. And my car is an auto. 460 rwhp and 450 torque. I only got to run it twice so I know I can improve. This is the second run braking the stock trans and stall to 2000.
 
Last edited:

TungstenGT06

Member
Joined
May 5, 2007
Posts
617
Reaction score
3
Location
Morrisville Pa
That's a good start. Wait until we get some cool air again and you should go faster. Did you try to launch at lower rpm to let the converter flash?
 

mustangtcs

Member
Joined
Oct 11, 2011
Posts
317
Reaction score
0
Location
Pennsylvania
My first run was a 12.05 and I left at a lower rpm. I don't know what rpm, I was just hanging on cause it was my first time going down the track. My 60' was 1.8 on that run but mph was 115. This run I know I left at 2000 which is higher than what I left on the first run and my 60' was lower, et was faster, but mph was lower.
 

Support us!

Support Us - Become A Supporting Member Today!

Click Here For Details

Back
Top