FS Lentech 4R70W with converter, shifter, flexplate, driveshaft

[PNR Welding]

2500 free shipping for it all firm.

This has been in my car since 09 and never gave me a issue since Lentech put a 300m intermediate shaft in. Very little street miles on it. Converter is 3200 stall 10". Used for turbo setup.
Non lockup trans.
I wanted to send it to Len to freshen and he said no need to. He told me that if it is running fine, then stay under the 1100 range and have fun.
Coming out the car this weekend.
I'll have pictures this weekend.

 

[roberts]

Got overdrive?

 

[PNR Welding]

Yes has OD. Electronic OD.
Full manual VB.

 

[ZmanM3]

What kind of gear did you have in the differential?

 

[PNR Welding]

I had from 4.10 to 3.73 to 3.31
Saleen blower I had 3.73 and 4.10, turbo I had 3.73 and 3.31

 

[ZmanM3]

Hmm, interesting... I love my t56, my wife refuses to learn to shift. Thanks for the info.

 

[roberts]

Yea I wanna do a 4r swap but just can't seem to know what to do and all that my only problem

 

[PNR Welding]

4r70w and precision triple disk converter for sale. They are going to the trans shop this weekend to have a 300m intermediate shaft put in. I was gonna rebuild this one, (had a intermediate shaft failure) and use it for my spare but I am going with a built th400 now that I just got. My car is race car only so I don't need the OD and other stuff.
Unloading it all. I have 1000$ in parts in that one.
4k plus shipping for both trans and converters and 1 driveshaft, 1 flexplate and one shifter.

 

[PNR Welding]

Things I'll trade for are engine parts/shortblock, pistons.

 

[PNR Welding]

Lentech 4r70w, converter, driveshaft, flexplate and shifter 2000 plus shipping.

 

[PNR Welding]

Bump

 

[roberts]

still have it check messages

 

[turbo05mineral]

I'm not sure if I have messaged you before, but is this still available?

 

[PNR Welding]

Sorry it's gone.

 

[13726548]

I had from 4.10 to 3.73 to 3.31
Saleen blower I had 3.73 and 4.10, turbo I had 3.73 and 3.31

Did the 3.73s work better for you with the Saleen blower?

Off topic, I know. Just curious.

 

[PNR Welding]

Worked great with 3.73s.
I'm going to install them again since I put a novi 2200 on it.