Roush TVS R2300 Supercharger kit

JimIII@JDM

Senior Member
Joined
Sep 15, 2007
Posts
3,065
Reaction score
5
We are currently taking pre orders and will have the first kit in our shop next week! However we will be working with a magazine company on the install so Im going to have to limit details for everyone until the article comes out. Ill be sure to get some pictures and details on the kit out as soon as we see it. Here is a flyer Roush sent over to me this morning! Call us with any questions or to place your order today!

JimIII
732-780-0770
 
Last edited:

SD07GT

Member
Joined
Oct 8, 2007
Posts
728
Reaction score
2
We are currently taking pre orders and will have the first kit in our shop next week! However we will be working with a magazine company on the install so Im going to have to limit details for everyone until the article comes out. Ill be sure to get some pictures and details on the kit out as soon as we see it. Here is a flyer Roush sent over to me this morning! Call us with any questions or to place your order today!

JimIII
732-780-0770


how is ford putting out a 9 psi kit 625 hp ony with 47lb injector change and no fuel pump up grade ? and on the stock bottom end ....pretty brave of them I would say .
 

bigwilly43729

I do stupid shit, a lot
Joined
Jul 27, 2007
Posts
6,751
Reaction score
14
Location
Oklahoma: Not terrible
how is ford putting out a 9 psi kit 625 hp ony with 47lb injector change and no fuel pump up grade ? and on the stock bottom end ....pretty brave of them I would say .

It says pretty clearly that the bottom end and fuel system would need to be upgraded to achieve that.

Nice blower though.
 
0

06whipple

Guest
Ford's 5.0 kit is only 75 hp more than what the 4.6 kits put out. I don't think they would release a kit unless they did durability testing and the tune is probably pretty conservative.
 
Last edited by a moderator:

luillo

Senior Member
Joined
May 23, 2009
Posts
1,581
Reaction score
44
Location
Fort Walton Beach, Florida
Ford's 5.0 kit is only 75 hp more than what the 4.6 kits put out. I don't think they would release a kit unless they did durability testing and the tune is probably pretty conservative. I have the 550 kit with the Ford calibration and think it is awesome with the exception of the 6 rib ten foot long belt. Did I mention that I beat the piss out of it. I run it to the rev limiter every time I drive it. 44000 miles on stock motor (8000 with the whipple) and over 200 passes.

Damn dude you are the man. That give me so much confident ingetting that SC or any other.
 

JimIII@JDM

Senior Member
Joined
Sep 15, 2007
Posts
3,065
Reaction score
5
The Ford Supercharger kit advertised for 624 SAE HP is a tuner kit, it means you need to figure it out for yourself ; ) The only thing I think people will do to start with is a boost a pump. But a twin pump system will probably be out soon too.
 
Joined
May 5, 2007
Posts
303
Reaction score
0
Location
Glen Mills, PA
The Ford Supercharger kit advertised for 624 SAE HP is a tuner kit, it means you need to figure it out for yourself ; ) The only thing I think people will do to start with is a boost a pump. But a twin pump system will probably be out soon too.

The Ford Racing Supercharger 624hp Kit (M-6066-MGT624D) includes:
• 2.3L twin-screw supercharger assembly
• Intake manifold
• Complete air-to-liquid intercooler system
• Drive belt
• 47 lb./hr., high-impedance fuel injectors (M-9593-LU47)
Ford Racing ProCal tool with performance calibration
• Produces 624 SAE hp @ 6900 rpm and 536 SAE lb.-ft. @ 4700 rpm, at approximately 9 psi of boost with 93 octane fuel
• MSRP $7,499.00 (black) and $8,099.00 (polished chrome)
 

JimIII@JDM

Senior Member
Joined
Sep 15, 2007
Posts
3,065
Reaction score
5
The Ford Racing Supercharger 624hp Kit (M-6066-MGT624D) includes:
• 2.3L twin-screw supercharger assembly
• Intake manifold
• Complete air-to-liquid intercooler system
• Drive belt
• 47 lb./hr., high-impedance fuel injectors (M-9593-LU47)
Ford Racing ProCal tool with performance calibration
• Produces 624 SAE hp @ 6900 rpm and 536 SAE lb.-ft. @ 4700 rpm, at approximately 9 psi of boost with 93 octane fuel
• MSRP $7,499.00 (black) and $8,099.00 (polished chrome)


I just meant for a fuel pump upgrade, do you guys know of anything in the works?
 

kyoshosp2

Senior Member
Joined
Jan 11, 2009
Posts
828
Reaction score
1
Location
Baton Rouge, LA
I thought they were 38# and from what I hear we have the stock pump on 40 amps and a 40 amp boosta pump does nothing.. Was tested already would have to be a 60 amp to speed up.
 

07stangcs

Undecided
Joined
Aug 19, 2009
Posts
676
Reaction score
0
Location
Houston,TX
How many LPH is the stocker on a 5.0?? Would a larger single with BAP get you by depending on the stock pump?
 

JimIII@JDM

Senior Member
Joined
Sep 15, 2007
Posts
3,065
Reaction score
5
Here are some pics, the kit came in last week. We will be installing it in about 2 weeks so Ill keep everyone updated!

41343_429321635138_121068375138_4849336_7686470_n.jpg

Dubbed, "the Mongoose" or some may say...the Cobra Killer!!!
41343_429321640138_121068375138_4849337_2723214_n.jpg

Very complete instructions, I looked through them Saturday and it was very detailed!
41343_429321645138_121068375138_4849338_2151591_n.jpg
 

RSKtakR

Senior Member
Joined
Sep 19, 2007
Posts
1,139
Reaction score
0
Location
Raymore MO
damn i wish my car was getting one of these installed for a shop to R&D!! lol
 

Latest posts

Support us!

Support Us - Become A Supporting Member Today!

Click Here For Details

Back
Top