0NF1R
ROUSHCHARGED!!!
Up for sale is a 2.49" blower pulley that is compatible with the M-90 ROUSHcharger supercharger system.
.
This pulley does not require a re-tune if you are currently running a 2.57" pulley...Just bolt it right on!
.
VMP new 2.49" Roushcharged M90 Blower Pulley for 05+ Mustang 4.6L 3V with Roush Blower that uses bolt on style pulley.
.
New smaller design adds approximately 1/2-3/4lb of boost OVER the 2.57 pulley and 10hp/10tq, no tuning or other changes required.
.
Adds 1-2psi more boost than the aftermarket pulley from Roush Performance.
.
If u are running the stock pulley, than you will need a 90mm idler pulley (which i also have for sale) and re-tune to use this pulley.
.
This pulley has a very small chip on the rim from my pulley puller slipping during removal but it does not affect the rotational balance, its strictly cosmetic...
.
VMPtuning.com has this pulley for $99 + shipping, im selling this one for $50 shipped! (Paypal)
.
.
.
Here is a video of this pulley installed on my car...notice the WHINE!!
.
http://youtu.be/KBAWcqGhJ9w
.
This pulley does not require a re-tune if you are currently running a 2.57" pulley...Just bolt it right on!
.
VMP new 2.49" Roushcharged M90 Blower Pulley for 05+ Mustang 4.6L 3V with Roush Blower that uses bolt on style pulley.
.
New smaller design adds approximately 1/2-3/4lb of boost OVER the 2.57 pulley and 10hp/10tq, no tuning or other changes required.
.
Adds 1-2psi more boost than the aftermarket pulley from Roush Performance.
.
If u are running the stock pulley, than you will need a 90mm idler pulley (which i also have for sale) and re-tune to use this pulley.
.
This pulley has a very small chip on the rim from my pulley puller slipping during removal but it does not affect the rotational balance, its strictly cosmetic...
.
VMPtuning.com has this pulley for $99 + shipping, im selling this one for $50 shipped! (Paypal)
.
.
.
Here is a video of this pulley installed on my car...notice the WHINE!!
.
http://youtu.be/KBAWcqGhJ9w
