What NGK is equivalent to the HT0 plug? It is about time to change the HT0 on the blower.
What NGK is equivalent to the HT0 plug? It is about time to change the HT0 on the blower.
I did. The car was running rich. That's why I was removing them to begin with.I dont have a problem with the performance of these plugs at all. Can anyone else chime in if they have running/idle problems??
It's the middle of April and my car still isn't running. Two of the plug bodies were basically atomically fused to the head, so I had to have all of the head hardware transferred to a bare head I had laying around.
With rental cars and all, this is going to be a $1500 set of spark plugs.
I dont have a problem with the performance of these plugs at all. Can anyone else chime in if they have running/idle problems??
I think I bought Abdulla's Brisk Plugs.....I think he forgot to tell me about the issues he was having with them..1 of them fouled out on me a week after I got them.. I just bought extras for if and when one goes out..
I had quite a bit of issues out of mine, I had a post in the tech thread about it. Swapped to a new set of brisk plugs which made it even worse(must've been defective?). Put the old set back in and regapped, still had a bad mis under boost. Swapped coils, cleaned maf, did everything else possible and still didn't fix it. Swapped in NGK plugs and that fixed it right up. FUCK BRISK.
That's super interesting to hear. I'm going to try to get time to get brisk on the phone and see if I can find out a reason why you guys are having problems.
Was the misfire everywhere in the rpm or just certain places. What was the boost pressure.