Search results for query: *

I have a full bolt on 07 GT with cams and I have a question about the inspection. I will be moving to Windham next month and my question is can a cammed 3V pass the inspection. My car runs LTs with cats year around and dosent kick a CEL, but I don't think my Brenspeed DR cams would pass the...

I have a 07 GT and I was thinking of swapping out the strut mounts for the GT 500 ones. Could you let me know the price shipped to 27527. Thanks Ciao Ken.

My brother just moved to princton nj and is looking to have his Q7 detailed. It is a black truck that will need swirls removed. I'm looking for someone that will be able to do a full detail and do it well. Thanks for any help Ciao Ken

So me and the fam will be moving to southern New Hampshire in the nextfew months. We have narrowed it down to either Bedford or Windam. We are focused on a great school district, staying under $400,000, and a house that us around 3000sq feet. Does anybody know of dome neighborhoods to look...

Dis regard I found my answer. Sorry

So I have an 07 full bolt on GT, and when I put the car on the two step I get a CEL for cylinder mis fire. 1. My tuner has never seen this before and offered to adjust my tune by turning all misfires CEL's off 2. The car acts like a raped ape until I get the light then it seems like it...

So I guess I found my new week point. 5000 rpm launch and ended up with this. And now for the bad part

I have a set of 18" pen stars that I need center caps for. Do yu guys sell them?

Has anybody used hood struts with a fiberglass hood? I have seen some that look like they are starting to bow. It looms like the strut is too strong for the lighter fiberglass. My question is who has run them for over two years and not had an issue? Also what brand did you choose. Ciao Ken

So I already tried the search but I could not find the answer. Brenspeed has the Lakewood 50/50 70/30 pretty cheap. I want to know if anybody has tried a before and after times with these. I don't DD my car, and I want something that will be OK on the street and hook on the strip. I have...

I hope this is the right section, if not sorry. I have a full bolt on 07 gt that I'm trying to get my 60' down on. Right now it cuts a 1.72 leaving at 5000rpm on MT ET streets. I purchased a set of BMR relocation brackets and my question is what bolt hole are you guys using with the best...

First off, I have no talent when I comes to taking pictures. Second these were done with my cell phone. So here we go. First is an 07 GT with bolt ones, and the second is an all original 79 pace car. The only mod is the drag lites. Thanks for looking. Also I know I have to cut the grass.

So I have 350.00 to spend in gift certificates at BBR, and I don't know what to get. I will be keeping the car N/A and I still like to drive it to work once in a while. The car sees the track maybe five times a year. So this is what I have done now 4.10 gears Diff cover Power slot...

OK so I return from a deployment in a couple of months and I really want to do my garage floor, but I am not sure of what I want to do. There seems to be endless amount of companies and or options, so I would like some ideas from people that have done it already. 1. What you like, and more...

so about three weeks ago some motherfucker decided to try to break into my car. it looks like they tried to pry my hood open with a crow bar. from what usaa told me, they are seeing a rash of these break ins. i guess people are trying to steal hid lights. well i dont know what they were...

i just purchased the BBR tublar k member and was wondering if anybody has seen a detailed install write up. i have found them for fox bodies but not for our cars. i tried to search k member, k member install, and dont laugh, just member (i should not have said that) on this site, but could not...

i am trying to decide on what hood to purchase. i am stuck between the cervini 2.5", cervini 4", or the bbr cowl style. if you have a vista blue and with a cowl hood could you please post up a picture to help make my decision easier. thanks ken oh here is a picture of mine

i always seem to strike gold on your used ebay auctions. when is the next big one. i have some money to spend and i want to spend it wisely.

sorry if this is not tech. first off i already tried a search and i could not find the answer i was looking for. i am trying to pick a k-member for my car and i am not sure what i should get. looking at the BBR site there are two that will work for me but the difference is that one lowers...

I put a feeler on the WTB section, but have not heard anything, so i figured i would try here. for those of you that have the MGW, where did you get it. I have only seen it on the MGW websited for 260.00. Have any of you gotten it else where. before i forget it is for a 2007GT. ciao ken

i am trying to get a MGW shifter for a 07 GT. Please PM me a price shippped to 27527 (claton NC). thanks ken

Why the fuck did i waited damn near three years for a god damn ford racing intake to come out for my 3V GT while the new 5.0 had a BOSS intake it what seems to be less than 6mo. I dont get it. While I am happy the aftermarket is jumping on the new 5.0, it still does not have the same feel as...

Ok I just installed a FRPP 3V intake manifold with the GT500TB, my problem is getting the CL street CAI (the aluminum one) hooked back up. the coupler between the TB and the CAI seems to be to small. i have tried everything i can think of. i have tried to heat the coupling, coat it in silcone...

Has anybody here installed the CHE K-Member brace with torque limiters on a car with long tubes. I have kooks LT's and i have seen on the website that the K-Member will not work on a car with SLP or ARH long tubes. If it will not work, has anybody found a K-Member brace that will work with...

I have a 07 GT with C&L intake, Detroit Rockers, and Kooks LT's with a catted H pype. I am trying to get my car inspected but about 100mi after i load the "Emission Tune" I get a P 0430 code. I know that 100mi is about how long the car takes to learn the new tune. now i talked to a S197...