Search results for query: *

  1. RedRide

    What have you done to your house today

    The light and shadow effect is actually really cool ! I like it :thumb2:
  2. RedRide

    What have you done to your mustang today?

    Spoilerless ! looks awesome
  3. RedRide

    What have you done to your house today

    Typically for headers made of solid sawn lumber; 1" of board width per foot of run is to be used as header material, laminations with plywood and / or other boards depends on how and where they are used. Fastening; 3 X 10d commons on 12'' center. At 12' rough opening you also have to use...
  4. RedRide

    What have you done to your house today

    Yeah please let me know. I looked at the link you posted; not a bad way of thinking / building. Will net some savings, not great ones, but some. More about savings on framing materials and framing labor than anything else. The crew has to be on point though because a simple screw up in layout...
  5. RedRide

    What have you done to your house today

    I'm with you. That's some kind of screw up. Maybe some new guy did the layout. Who knows, but it should get corrected; simplest way ( now that everything is built ) would be to add studs inline with the joists and make sure they fasten them to the sheathing. .
  6. RedRide

    What have you done to your house today

    I see you meant you were concerned with the 24" o.c. framing of the joists...sorry. 24"o.c. joists is not unheard of, but its not common either. Whenever building with engineered lumber you have to go from a plan made by a structural engineer based on what materials, loads and span. Maybe in...
  7. RedRide

    What have you done to your house today

    Looking at that picture again and noticed that where the girder is ( the joist that has a wider bottom member on the left ) has to have a point load under it ( studding under it, of the same width, going from base plate to top plate )
  8. RedRide

    What have you done to your house today

    Are there any builders on here? I don't know where what you've been told came from; inline framing means everything should line up: whether it be a floor system ( studs line up / rest on top of joists ) or roof ( trusses or hand cut ) rafters should follow the stud layout. Doing this allows...
  9. RedRide

    Steeda strut mount question

    I've never had any noise or other troubles from them, installed them from the get-go the first time I messed with my suspension. They've been quiet since 2008.
  10. RedRide

    To My 05-09 Peeps

    102K of weekend fun on the '06 !
  11. RedRide

    torx 50 plus in san antonio area

    Regular T-50 works fine, I drove myself crazy looking for the special one ( with no luck ) until I actually got under there and gave the regular T-50 a try. Works no problem, never had to use an impact on it, was never that tight.
  12. RedRide

    Can you do a clutch job on jackstands?

    I'll have to remember that one for when it comes up again. good thinking:hi:
  13. RedRide

    * Power Wheels S197 Mustang Make-Over *

    That's golden !! Way the be a great dad, well done.
  14. RedRide

    Odd request for part! C&L MAF Insert

    Ok, I don't remember throwing it away but I looked all over for it and couldn't find it. I'm sorry bud, I really wish I could've helped you.
  15. RedRide

    Odd request for part! C&L MAF Insert

    I might still have mine, I'll look when I get back home tomorrow. If I do you're welcome to it. I'll let you know.
  16. RedRide

    What have you done to your mustang today?

    Found out a mouse has been living in my hood insulation. Great.
  17. RedRide

    Noise from LCA's and relocation brackets...what's normal?

    My exact line of thought, get the kind of gun you can load grease that doesn't come in a tube if it's all you can find.
  18. RedRide

    Noise from LCA's and relocation brackets...what's normal?

    Chef's choice, both will work.
  19. RedRide

    Noise from LCA's and relocation brackets...what's normal?

    Energy suspension grease is also a good and popular choice. I'm pretty sure it's lithium based as well.
  20. RedRide

    FRPP shifter for 05-10(?), hurst competition plus shifter for 05-09 v6, both NIB

    The FRPP shifter M-7210-MGTA you have listed is for 2010's IIRC the '05-'09 is M-7210-MGT I can't say why / what's different, I simply remember the SKU from my ordering back in the day.
  21. RedRide

    Great write up on the 2014 Shelby GT500

    that was a golden read ! thanks a bunch want it automatic ? fuck you ! :roflmao:
  22. RedRide

    2015 Turbo 4 cyl cluster

    Plucky Duck ? lol
  23. RedRide

    New guy from BC (CANADA)

    Welcome ! might run into you someday
  24. RedRide

    Replacing thermostat

    Factory is 180.
  25. RedRide

    Bullitt

    Yup, me too. But for some reason when it's on t.v. I HAVE to watch it lol !

Latest posts

Support us!

Support Us - Become A Supporting Member Today!

Click Here For Details

Sponsor Links

Banner image
Back
Top