Stock clutch, 8 bolt cobra flywheel "cant remember the brand right now", tr3650 trans. The car is jack up off the ground and if i turn on the car and put it in 1st gear the back wheel will spin even if i hold the clutch pedal in or i let it go. Now i was told that if i put the car on 1st gear while the car is off and i try to spin the wheel by hand it shouldnt move at all, but it does. So i replace the tob and the clutch master cylinder and still does it...
Im lossing my head not being able to enjoy driving my car down the street
Sent from my SM-G925T using Tapatalk
Hmmm. That may be the issue right there depth may be off. I assuming you have a built motor then since you said 8 bolt cobra flywheel. Pre 05 flywheel will fit but is different than a stock 05+ flywheel due to slight difference in oem clutch design. A 96-04 flywheel is fine for use with an aftermarket clutch and is prefered as you get better engagement area over trying to a stock 05 flywheel with a different clutch. But pretty sure you have a depth issue with a stock 05+ clutch on that flywheel so yhe slave doesnt have enough travel to disengage the clutch completely when fully depressed.