Another 15 inch wheel option>?

[Liftedbronco]

its really sad that no one makes drag wheels for the longest running muscle car ever. Are imports really that popular? WTF is going on. This isnt rocket science. Measure twice, forge once...lol.

 

[Racingtheburg]

its really sad that no one makes drag wheels for the longest running muscle car ever. Are imports really that popular? WTF is going on. This isnt rocket science. Measure twice, forge once...lol.

I can make one on CAD, but the cost of producing it would be more than Bogart's.

 

[Hitman]

I talked to Mike on Tuesday. He said the 15" rear wheels were NOT going to fit. The front wheels have been revised to fit but we will have to have smaller brakes on the back. That sucks a fat dick. Fuck this garbage I'm going with 17's.

 

[Freaknazty]

ok i came across these the other day they say they are a complete bolt on set .....are they full of shit or what ? http://rpmoutlet.com/05gt.htm#33

 

[don_w]

ok i came across these the other day they say they are a complete bolt on set .....are they full of shit or what ? http://rpmoutlet.com/05gt.htm#33

I wouldn't trust RPM outlet at all.

And $2000 (+$100 oversize fee) isn't much of a deal... for $125 more, you can get 15" Bogarts on all four wheels (not just the rear), and Mickey Thompson slicks/skinnies.

 

[US-1]

ok i came across these the other day they say they are a complete bolt on set .....are they full of shit or what ? http://rpmoutlet.com/05gt.htm#33

You also want to be careful about those Weld Wheels. They 9.50" wide wheels show to have a 6" backspacing here............
http://www.weldmotorsports.com/pdfs/Alumastar20MagnumPro1517.pdf

I talked to Weld about it and they flatly state that this is the correct backspacing for these wheels. I told them, "Sure....if you want the tires and wheels to hang outside the car 2 inches."

 

[Freaknazty]

I wouldn't trust RPM outlet at all.

And $2000 (+$100 oversize fee) isn't much of a deal... for $125 more, you can get 15" Bogarts on all four wheels (not just the rear), and Mickey Thompson slicks/skinies.

lol well me personally would never buy from them but figured some1 else has to sell those rims lol and to tell you the truth i never really priced the bogarts just knew every1 bitched about the price lmao

 

[don_w]

lol well me personally would never buy from them but figured some1 else has to sell those rims lol and to tell you the truth i never really priced the bogarts just knew every1 bitched about the price lmao

Here is what I paid:

Bogart 15x10 Drag Wheels, 2 x $460 ea = $920
Bogart 15x4 Drag Wheels, 2 x $300 ea = $600
Mickey Thompson, MTT-3057, 28.00 x 11.50-15, 2 x $209 ea = $418
Mickey Thompson, MTT-3009, 27.50 x 4.50-15, 2 x $144 ea = $288

Total = $2,226

 

[Freaknazty]

ahhhhhhhh i got ya man lol kool kool , yea id really never priced the whole deal just looking around on rpm and came across it .....by the way im sure this is known already but summit will match any1s price ( thats the only reason i go on rpm's site lol )

 

[A John In NJ]

746RWHP on a stock motor?!?!? WTF?!?!?

 

[don_w]

746RWHP on a stock motor?!?!? WTF?!?!?

Huh?

 

[A John In NJ]

At the link for rpmoutlet... Read the top article.... It talks about a f1 procharged mustang

 

[A John In NJ]

In keeping with our goal of providing our customers with the best possible value, we have tested a large group of components specifically designed for the 05-08 Mustang GT 3 Valve Motor.

We have invested hundreds of hours evaluating and refining each of the new 4.6L 3V products on our MD Chassis DYNO, and at race tracks coast to coast to ensure that we would develop as much power as possible, and as safely as possible.

The site menu on the left side of this page, lists the clear winners when it comes to “performance vs. dollar” value. Please check back often as we are always testing and developing new ways to create more horsepower. (shown on right)
746 RWHP (823 crankshaft HP) 2005 3V Mustang GT
Stock Motor, DiabloSport Tuned F-1A ProCharger Kit!

 

[1Fast05Turbo]

746RWHP on a stock motor?!?!? WTF?!?!?

Hmmmmm it is not stock. Look Here
Check out the engine specs.

 

[ILW84U]

In keeping with our goal of providing our customers with the best possible value, we have tested a large group of components specifically designed for the 05-08 Mustang GT 3 Valve Motor.

We have invested hundreds of hours evaluating and refining each of the new 4.6L 3V products on our MD Chassis DYNO, and at race tracks coast to coast to ensure that we would develop as much power as possible, and as safely as possible.

The site menu on the left side of this page, lists the clear winners when it comes to “performance vs. dollar” value. Please check back often as we are always testing and developing new ways to create more horsepower. (shown on right)
746 RWHP (823 crankshaft HP) 2005 3V Mustang GT
Stock Motor, DiabloSport Tuned F-1A ProCharger Kit!

The stock motor probably only lasted one dyno pull at that power!

 

[A John In NJ]

Then I don't understand why they would write Stock Motor...... One more reason not to trust RPMOUTLET

 

[Freaknazty]

i just saw an add in mm&ff that one of there fetured "fang " cars was running a procharger and 125 shot on stock bottom lol im not sure of the actual hp ill look back in the morn but i was like wtf pro+ nos huh

 

[A John In NJ]

I think we should bring this to another thread... no need to kill this one.... If someone wants they should open up another thread

 

[1Fast05Turbo]

I think we should bring this to another thread... no need to kill this one.... If someone wants they should open up another thread

Why??? What's wrong with this thread??? J/K...

About a couple years ago I think Cragar announced drag wheels specific for S197 and after further investigation it was found that spacers where required. What's up with the wheels manufacturers? There's the need and demand for them and nobody is stepping up to the plate...

 

[US-1]

Then I don't understand why they would write Stock Motor...... One more reason not to trust RPMOUTLET

They just left out the words "cubic inch". You know...."stock cubic inch motor."