Recent content by Awad Alibrahim

  1. Awad Alibrahim

    How to Install a 2010-2014 Mustang Steering Wheel into a 2005-2009 Mustang

    Ohhh I see, that's great thank you very much.
  2. Awad Alibrahim

    How to Install a 2010-2014 Mustang Steering Wheel into a 2005-2009 Mustang

    I know it's been a while since the release of this guide but I have a question Where does the pink ground eyelet go exactly? (after soldering it to pin 7 and 4) Is it there from factory on the 2010+ wheels or is it an addition?
  3. Awad Alibrahim

    2009 Mustang GT keeps blowing fuse 47

    The water level was about an inch when it first occured. I took the car to a detail shop and they removed the carpet and interior and dryed it all as well as an interior deep clean. I removed The fuse box when I was cleaning out the connectors and it didn't seem like it had any water damage...
  4. Awad Alibrahim

    2009 Mustang GT keeps blowing fuse 47

    Although I don't think that the water reached the panel, I'm gonna need to check it just to be safe. I'm also gonna install another throttle body to see if it makes any difference, like I said before, it got drenched in water.
  5. Awad Alibrahim

    2009 Mustang GT keeps blowing fuse 47

    I did what you said and in fact it did decrease the number of codes, when I ran my scanner the first time right after it stopped raining I had about 28 codes, and after letting it dry and cleaning the connectors I'm left with 6 codes, which actually go away when I replace the fuse but as soon as...
  6. Awad Alibrahim

    2009 Mustang GT keeps blowing fuse 47

    There was a lot of water intrusion sadly but it wasnt from the drains. It was because of how high water was, but the issue started before the water level got to a point where it entered the cabin. That's why I don't think it has anything to do with the secondary fuse panel. But I'll check it...
  7. Awad Alibrahim

    2009 Mustang GT keeps blowing fuse 47

    A while back when it first happened I unplugged the connectors for the pcm, maf, throttle, vct actuators, and cam position sensors and cleaned them with electric parts cleaner. I also pulled the codes through my blue driver and got the following: P0010 "A" cam position actuator bank 1 P0020...
  8. Awad Alibrahim

    2009 Mustang GT keeps blowing fuse 47

    A few months ago we had some heavy rain where I live, and I may have driven through some large puddles and kinda drenched the throttle body. Since then, I've been facing an issue with the wrench and check engine lights coming on and the throttle response is almost non existent. After a little...
  9. Awad Alibrahim

    Cooling Fan High Speed Relay BEC melted

    I know it's been a while since this forum has had any activity, but I have a question regarding the ignition voltage. How much does it have to be exactly? Is 12V enough? Also, will air conditioning work directly with this wiring or do I have to add an extra circuit? Because I hooked up the...
  10. Awad Alibrahim

    Anyone running the Power by the hour 3v Coyote harness?

    Great, thanks for the help!
  11. Awad Alibrahim

    Anyone running the Power by the hour 3v Coyote harness?

    If you're gonna hook it up, can you document it? Thanks
  12. Awad Alibrahim

    Anyone running the Power by the hour 3v Coyote harness?

    Ohhh, I see. Thanks for the info!
  13. Awad Alibrahim

    Anyone running the Power by the hour 3v Coyote harness?

    What needs to be? I didn't understand
  14. Awad Alibrahim

    Anyone running the Power by the hour 3v Coyote harness?

    Does it retain the factory cruise control and speedometer?
  15. Awad Alibrahim

    Best affordable clutch?

    The stock tr3650 comes with a 10 spline input shaft.
See more

Latest posts

Support us!

Support Us - Become A Supporting Member Today!

Click Here For Details

Back
Top