Recent content by MrFast

Folks, like the 05gtowner, I have the exact same issue as stated "When I fill the tank, I get a P0463 Fuel Level Sensor Circuit High Input code and the needle drops to empty and the fuel light and Check engine light illuminates. Then once I reach about half tank the needle returns to half way...

Maybe this is some sort of initiation hazing Ford does for it's Mustang owners, but this stinks. I've taken the leather off each side and started the wire brush work to remove the glue, but looking at the edge of the "glue panel" in the picture below, should I start ripping down the glue panel...

JC, yes it is. Picture is from Watkins Glen Internation Raceway. SRT6 is not a common visitor at the tracks, so I get asked "what is that?" a lot. Dino, thanks for the picture as reference! Our cars look good in red!

Thanks for the advice. Looks like 255/45/18 is 27.0", a bit shorter than the factory stock tire 235/50/18 which is 27.3". I was hoping for a taller tire, so maybe 245/55/18 at 28.6 might be good. Still wondering if anyone has tried a taller tire on these stock rims on the rear and how they...

I am looking at a bigger tire size for my 2006 GT with the stock 18x8.5" rims. I was thinking of the 255/55 size that measures 29" diameter (stock tire 235/50/18 is 27.3") on the rear to fill up the wheel well with my stock ride height set up. Has anyone done this? I know it seems a bit tall...

Folks, I wanted to follow up on my removal of the aftermarket performance lowering kit and conversion back to stock ride height. Personal preference is a hot rod look. I went a bit overboard and ended up replacing Rear springs and shocks plus front Struts (with springs) + sway bar links +...

Just saying hello to Mustang folks again after a long break from Ford. Last one I had was an 89 GT back in the 90s and a 67 notchback in the 80s. Many cars in between. Looking forward to gaining access to WTB posts to fix some missing bits in the 2006 GT that I just picked up.

MADGT, I have been looking for these as well with no luck. Let me know what you find out. So far, these are my top candidates: Shelby mats Ebay "sport" mats Ebay "mustang" mats Amazon "cheap" mats Amazon Lloyd brand mats

Thank you for the definitive answer! Love this forum.

Thanks folks! I finally understand there are limitations with the hood clearance (I didn't think of that), plus the apparent fact that 2006 GT Premium did NOT have the strut tower brace as standard OEM equipment like the 2011 to 2014 does. No wonder I could not find used ones on ebay! I was...

Thanks Samos3. Still looking to get an answer to this. While some aftermarket strut braces will work from 2005 to 2014 GT, I don't see a answer if a 2011-2014 will fit on a 2006 GT.

I am looking to purchase an OEM style GT strut tower brace for my 06 GT. I am finding original GT braces for sale on ebay for 2011 to 2014, but nothing for 2006. Will an OEM 2011 to 2014 brace fit on my stock 2006 GT? (I have no intake mods)

MrBhp - thanks for the heads up the exhaust hangers. I attached a pic looking from the other direction below. Good thing is I have no CEL codes pointing to this set up. This car has been mostly hibernating for the last 10 years after making the trip from California in 2013. I've only had it...

Moooosestag and 07 Boss, as soon as I get the ability from the Administrator, I will PM you. JC SSP, thanks for the info, but I think I'll pass on your stuff for now. Good luck.

I got the chance to put my "new to me" 2006 GT up on a lift. I found what appears to be some after market wiring on both sides of the trans near the O2 sensors and catalytic converters. Not sure what they are for, but the car was originally from California. See the blue connectors in the...