Recent content by PawelS

  1. P

    Engine stalling and dies few minutes after start

    It was a set from Amazon, and yeah, there’s not schrader valve at all. I had to disconnect the fast connector between fuel rail and tank hose. It’s right under the driver’s side fuel rail. It’s tricky to unlock it without a proper tool, though. The adapter included in the set was a perfect fit...
  2. P

    Engine stalling and dies few minutes after start

    In my case it was not compatible fuel pump drive module. I changed this module with a pump but after installing the original one back car works fine.
  3. P

    Engine stalling and dies few minutes after start

    @Rotgutrusty Unfortunately not yet. That is my next suspect, the PCM. It has a communication with obd, but might just faulting out internally. Maybe somebody can give a hint how to check PCM other way than swapping with a working one? If you will fix the problem, let me know. I really want my...
  4. P

    Engine stalling and dies few minutes after start

    @Dino Dino Bambino When engine died gauge was at 35PSI and the read from sensor was approx 290kPa. The only thing I noticed, it’s showing the pressure relative to manifold and it’s not matching the gauge exactly. It is a head scratcher and some kind of mystery. Fault stayed the same P0191. I’ll...
  5. P

    Engine stalling and dies few minutes after start

    Sensor has been changed and no improvement. I would say it’s even worse. It doesn’t die after few minutes, but below 1 minute now. Pressure read from the sensor is relatively lower comparing to the previous sensor, but now the pressure from the pump is coming to the gauge but engine dies...
  6. P

    Engine stalling and dies few minutes after start

    I finally hooked up the fuel pressure gauge and I found something what can be a good explanation. First picture is a pressure built, second is 40 minutes later to check possible gas leaks on the injectors and the rail and 3rd is a value read by the fuel rail pressure sensor. These are definitely...
  7. P

    Engine stalling and dies few minutes after start

    Thanks for your reply. I ordered pressure gauge and it supposed to arrive today. Maybe I’ll be able to check the pressure, what should be my first step after bringing car from the dealer instead of changing parts like crazy… Well, people learn on their mistakes. Bank 1 means the one the driver...
  8. P

    Engine stalling and dies few minutes after start

    Thanks for your reply. I ordered pressure gauge and it supposed to arrive today. Maybe I’ll be able to check the pressure, what should be my first step after bringing car from the dealer instead of changing parts like crazy… Well, people learn on their mistakes. Bank 1 means the one the driver...
  9. P

    Engine stalling and dies few minutes after start

    Hey guys, it’s a pleasure to join the community. I was happy 2005 V6 convertible mustang owner until now… I was driving back home with tie rod ends (what an irony) and suddenly car starter to stall and died on the highway. I towed it to the dealership and they “diagnose” faulty alternator...
See more

Latest posts

Support us!

Support Us - Become A Supporting Member Today!

Click Here For Details

Back
Top