Search results for query: *

  1. T

    Weird OBD2 communication issue

    I have a 2005 mustang gt and never had these issues before with my car before. Perhaps, it's the emissions/state machine. I have sct x4 and a handheld cree scanner. Both work perfectly fine on my obd2 port. The other day, I went to my local shop for an Emissions test, (my handheld scanner says...
  2. T

    Clutch master cylinder rod Eyelet

    Had this unfortunate piece break on me and left me clutchless. I replaced it with an metal one. Few questions for anyone else whose done this. The master cylinder was wet with fluid and I wiped it down and this may have been to me trying to limp the car home and kinda forcing the clutch pedal...
  3. T

    Battery options/debate

    Anyone know where to get a replacement negative terminal bolt?
  4. T

    Battery options/debate

    Also Should I be looking for a 40r or a 96r battery? Couldn't figure much of a difference there
  5. T

    Battery options/debate

    Got a 2005 mustang gt And recently, one of my battery's cell died and my battery read 10.6v after putting it under load. advanced Auto parts gold battery. Ended up lasting me 4 years (3 year warranty). Seems like batteries really do last 3 to 5 years now. I'm looking at getting an interstate...
  6. T

    Recommendations for cheaper tires?

    I bought Lionhart LH-5 and they have been very good in dry conditions! Wet road is fine as long as you don't lay on the throttle at take off otherwise you may spin. I bought them from American Muscle and with over 3000 miles on em, I'm VERY happy. Tire size 275 35 20
  7. T

    Parasitic current draw - anyone have specs?

    After tackling a few issues, I have dropped the current draw from .43 to .115 I can't seem to get it drop any lower. Is this too high that it'll cause too Much drain? ?
  8. T

    Mustang gt intake manifold + motor actuator

    As of now, I found someone to sell me a replacement! If it doesn't workout, I'll send ya a message! Thanks!
  9. T

    Mustang gt intake manifold + motor actuator

    I got the unfortunate P2004 p2005 p2006 CEL. I saw there's a TSB and am looking for a intake manifold + motor assembly if anyone has one on sale.
  10. T

    Help! Car completely died on the road. No power

    Thank you all for the help!!!!!! :chewie:
  11. T

    Help! Car completely died on the road. No power

    Solved my problem fellas. The wire connecting to the Fusebox (main power connector) was damaged from the bottom of the cover. I cleaned up the wires and fixed the connection. It was basically hanging together and whenever bumps happen, it'd disconnect. Whenever I'd shake the wires by removing...
  12. T

    Help! Car completely died on the road. No power

    Now I'm blown. So after cleaning contacts and connecting everything back up, I have Zero power. Nothing works at all. Volt meter reads 12.9V and 4 amps drawing. No short either. Could it be my SJB could have gone bad? I'm lost :angry1: Any way to test the SJB?
  13. T

    Help! Car completely died on the road. No power

    I added a 2 gauge power wire + dedicated ground incase of any power wire problems.
  14. T

    Help! Car completely died on the road. No power

    i cleaned all the contacts and made sure no more corrosion was left. It wasn't as much as expected but definitely was there. Fingers crossed this fixes it
  15. T

    Help! Car completely died on the road. No power

    Giving an update. I installed new power and ground cables. Still didn't fix it. I was going through my fuseboxes and saw that some of SJB parts had corrosion on them. I am almost 100% sure it has to be this box. That would explain why I can get the turn back on after removing the ground cable...
  16. T

    Help! Car completely died on the road. No power

    M
  17. T

    Help! Car completely died on the road. No power

    I did find this on the internet. I do believe the new alternator was a 3g upgrade
  18. T

    Help! Car completely died on the road. No power

  19. T

    Help! Car completely died on the road. No power

    I recently replaced my alternator (stock that had a failing regulator) with a 2009/2010 denso Remy rebuilt one from Rockauto. Could it be I got a defective one? I am still using the stock power wire with no fuse. I don't know if I should have upgraded my power wire when I upgraded to the new...
  20. T

    Help! Car completely died on the road. No power

    I tapped into the turn signals for the halos and I have a wire with a fuse running from the bluetooth controller to the bolt that connected to the fuse box.
  21. T

    Help! Car completely died on the road. No power

    So I recently replaced my alternator as the voltage regulator on my old one was dying. Did the swap and turn on the car. Everything ran great for a day or two. But today, I was gunning down the highway and BAM outta no where, complete power loss. No lights. No power steering, no signals. I...
  22. T

    Dreading spark plug change..... NOVA area help

    3/8 ratchet and a pipe extension LOL I soaked the plugs in seafoam deep creep for over 2 hours prior. And for 3 of them that didnt wanna budge, I turn em a quarter turn and more seafoam deep creep for 20-30 mins. I ran a fuel system cleaner in the gas tank for about 20-30 miles too.
  23. T

    Dreading spark plug change..... NOVA area help

    No broken plugs :karate::clap:
  24. T

    FRPP Intake Manifold stumble? (To keep or not)

    Ever find the solution? I seem to be having a similar situation :confused:
  25. T

    Dreading spark plug change..... NOVA area help

    Thanks for all the videos!! Hopefully everything goes smoothly I was kinda hoping to take out as many plugs as possible and then just have someone local come help extract the plugs that break(I'd pay em of course).

Latest posts

Support us!

Support Us - Become A Supporting Member Today!

Click Here For Details

Back
Top