Search results for query: *

  1. R

    2007 OEM Head Unit

    SOLD! I have a stock Head Unit from my old mustang that I just found the other day. I'll sell it for $20 OBO with the buyer paying shipping. Message me if you are interested. I'll take cash or Paypal. I'm located in New Orleans, LA (70122).
  2. R

    Debating parting out the car...

    Well I never thought this day would come, but it looks like I could be selling the mustang in a year or so and getting a car that is a little more 'family friendly". I'd trade the mustang in and am thinking about parting it out. I've looked at everything except the removal of the Whipple. What...
  3. R

    Stock valvetrain and 16psi

    Will a stock valve train withstand 16 psi very long or would new retainers, springs, etc. be needed?
  4. R

    Turning back to stock

    I'm thinking about parting out the car, selling it, and then buying a gt500. I figured I can sell the whipple for a good amount and that'd help a lot with going for a gt500. My question is, what will the parts list be that I need to turn the engine back to stock? I know an intake manifold...
  5. R

    Feeler

    I've got an 07 GT with 35000 miles on it, 5-speed manual, 3.31 gears, Tungsten Grey with black leather, front and rear side airbags, and then tons of mods. Mods include: -Polished Whipple HO Kit -Maganaflow Magnapack Cat-back Exhaust -BMR Adjustable UCA -BMR Boxed LCA -BMR Adjustable Panhard...
  6. R

    Crank

    In these new motors is it a 6 or 8 bolt crank? I figured 8, but wasn't sure...
  7. R

    Engine Build

    I've talked about this several times and it is finally looking like a reality. I'm probably soon to sell my jeep and have some extra cash lying around and want to put in forged rods and pistons since I never plan to go over 600rwhp and don't want to change out my clutch. I'm on a budget of a max...
  8. R

    Helmet

    I've got a $150 budget for a helmet. I won't be tearing up the strip a lot, but will go probably once a month with my friends to run against their cars. I'm looking at this one, but not sure if it will work or not: http://www.summitracing.com/parts/GFR-3002XLGWH/ What would you guys recommend...
  9. R

    18x9 or 18x10 Deep Dish Bullits

    I'd like to buy some either 18x9 or 18x10 black deep dish bullits. I've got 2 that are messed up. One with curb rash and another that got hit by a retread. If you have any please pm me. Looking at most to spend $200 for both...found 2 at cruzinconcepts.com for $113 each and don't want to exceed...
  10. R

    Driveline Questions

    I had a spec 3+ and BMR adjustable UCA installed on my car last year and the clutch was hard to get in the "sweet spot" and there was a little vibration and shaking at first. That went away when the clutch broke in well and I had FRPP springs installed (possible pinion angle issue corrected by...
  11. R

    Advice on Wheels

    OK...so both wheels on the passenger side are scuffed (not from curbing...a re-tread tore em up and hit my front bumper too, but got everything else painted, just not the wheels) and I'm wanting to get wider wheels for the back so I can run a bigger tire for traction. I'm looking at either just...
  12. R

    Looking at some DR's...

    I'm debating between Nitto 305/40/18's and 315/35/18's. I know the 315's will be shorter and give me a different gearing setup, but the 305's are taller and will make me need more gear. I don't drive this car everyday and save it for sunny and warm days. Which would you guys go with? They are...
  13. R

    Steeda Street Wing (Low One)

    I've got a Steeda Street Wing (paint code T8) that I just replaced with a GT500 spoiler (wanted something smaller). Car has been covered it's whole life and there is nothing wrong with this spoiler at all. I'm asking $225 for it because it is in such good condition and comes with all parts...
  14. R

    What cams would be best?

    Looking for top end power from the Comp NSR cams. I'll soon get LT's and would like to get some more top end power, back of the psi with the whipple, add a set of 4.10's, and keep the power around 465rwhp before the new shortblock next spring. Which cams? Stage 1 or 2?
  15. R

    315 35 20 Pirelli

    315 35 20 These fit on a 20x10 Nitrous Foose Wheel? Saw that H&R run that size and was wondering if I could too, but on the foose wheel instead...
  16. R

    Shifter and D/S Loop

    What D/S Loops work with the Hurst shifter with minimal mods to either piece? I'm looking at going with the 4" Axle Exchance 1-Piece by the way...
  17. R

    2v,3v,4v Blocks

    What's the differences in the blocks? I know the heads are different, but I know One Eyed Willy used 2v studs because they were cheaper and they fit perfect? I'm not sure what changes might need to be made, but I've found some pretty good priced 2/4v and was wondering about the differences?
  18. R

    BBR Short Block

    Looking at getting a BBR Short Block. I've got a list of somethings that I figure I'll need, but would like to see if there might be anything else I might need. List that follows is what I was figuring I will need with their option of an 8 bolt forged crank. New flywheel with bolts Head Gaskets...
  19. R

    Questions on Line Locks

    I admit I don't know much about LL, but am looking to get some for the DR's I will soon get. My questions are: Will this effect my ABS? What is a good kit and where can I find one? (Looking at the SLP one?) When I disengage the Line Locks will I roll out like with a 2 step? This is a DD also...
  20. R

    Looking at wheels

    I've got a FRPP springs and am looking to replace the 18" DD Bullits. I was looking at the Black GT500 wheels, Steeda Spyder Wheels, Shelby Razors, and just trying to really find either an 18" or a 20" wheel with some bit of a chrome lip to it that will fit a set of Brembos or some other BBK...
  21. R

    Gen 2 rotors

    I bought my whipple right before the gen 2 rotors came out. I haven't thought about it in awhile, but could I possibly swap out the rotors? I've emailed whipple about buying new rotors. I believe the hp gain would be worth it if the price for install and the rotors were under $1500 with an email...
  22. R

    Pyrometer Gauge?

    I was looking at some additional gauges and was wondering what a pyrometer gauge is? Tried a search and couldn't find anything and never heard of it before...I've already got a wideband A/F, oil pressure, boost/vacuum FYI
  23. R

    What About this Block?

    Going through an older 5.0 Mustang Magazine and came across an add and went to this site and found this assembled block. What do ya'l think? I might pull the trigger in a month or two if this is quality...looks like it is. http://www.coasthigh.com/product-p/11884-ps-f4.6l-sb.htm Looks like a...
  24. R

    Which Shocks/Struts?

    I am looking at tokico hp strut/shocks as well at their d-spec and FRPP. Springs that are going in are FRPP springs. The car sees little if any time on the dragstrip as well as autocrossing. Car is a DD...got springs and some other things in today and can't make up my mind about the...
  25. R

    These the right strut mounts?

    http://cgi.ebay.com/ebaymotors/FORD-RACING-05-08-MUSTANG-GT-GT500-FRONT-STRUT-MOUNT_W0QQcmdZViewItemQQ_trksidZp3286Q2em20Q2el1116QQhashZitem370188771167QQitemZ370188771167QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

Support us!

Support Us - Become A Supporting Member Today!

Click Here For Details

Back
Top