Search results for query: *

  • Users: BACNBLAK
  • Content: Threads
  • Order by date
  1. BACNBLAK

    WTB: Saleen headrests

    Want to buy a pair of Saleen S197 headrests like this: PM me if you have a pair for sale.
  2. BACNBLAK

    New trunk tank

    Had this beautiful tank custom built for $135 (+ shipping) by Donny Bailey: [email protected] 765-243-9070 It holds 4 gallons of coolant, and will allow my Killer Chiller to work more efficiently. Contact Donny, he can build you any size tank for a very reasonable price.
  3. BACNBLAK

    FS: Rear Seat Delete Kit

    SOLD! Selling a like new MMR rear seat delete kit in black. I find it too inconvenient not having a back seat. $100 shipped, just 4 months old. PM me if interested.
  4. BACNBLAK

    carbon fiber intake

    I'd like to have a carbon fiber intake tube made to replace the metal intake on my KB Mammoth. Does anyone know of a shop that would do something like this?
  5. BACNBLAK

    FS: 60 lb. Injectors and Adapter harnesses - SOLD

    SOLD! They're coming off my car on 6/4, have about 3k miles on them. I'm upgrading to 80 lb. injectors. $250 shipped or best offer. PM me if interested.
  6. BACNBLAK

    FS: BMR LCA Relocation Brackets

    Selling a used pair of BMR lca relocation brackets for $50 shipped. They've been on my car nearly four years and are probably part of the first batch made. I remember we had to "coax" the driver's side bracket to fit properly hence the tool marks on it. They were not welded on, and there is...
  7. BACNBLAK

    FS: Spec 3+ clutch and Spec steel flywheel

    SOLD! Selling a used 26 spline Spec 3+ clutch and an 8 bolt Spec rebuildable steel flywheel for $250 shipped. Only 2k miles on this setup which retails for over $700. Reason for sale? Just installed a KB Mammoth kit and need a twin disk clutch to handle upwards of 750rwhp. PM me if interested.
  8. BACNBLAK

    Urgent! Spec 3+ won't hold 700rwhp+

    I just had a KB Mammoth blower installed on my car (thanks Cali) and was on the dyno tonight getting retuned. The motor is built, the heads are ported, and all the necessary supporting hardware is present. I'm running a Spec 3+ with a Spec steel flywheel and a McLeod hydraulic tob. We did these...
  9. BACNBLAK

    FS: Custom Saleen SC Plenum

    The plenum is new, left over from an old project. The Saleen logos have been ground off, sanded smooth, and it's been repainted with black textured paint. $175 shipped or best offer. PM me if interested.
  10. BACNBLAK

    STB fits with my KB...sort of

    I've been looking for a stb that will fit over my KB and clear my Saleen hood, this one works for me but maybe not for others. It's sold by: https://ssl.perfora.net/massivespeedsystem.com/sess/utn;jsessionid=15497f27b7b7ab0/shopdata/index.shopscript It costs $81.25 plus $5.00 shipping. Comes in...
  11. BACNBLAK

    BMR Strut Tower Brace

    Does anyone have this BMR strut tower brace installed over a KB? If so, could you please post some pictures? I've got 1/2 inch lower motor mounts and think it may fit my car. Thanks in advance.
  12. BACNBLAK

    Drag Radials and Detailed

    Had my 305/45/18 Nitto drag radials mounted today and the car was detailed recently, it's never looked this good. Taking it to Zmax Dragway on 12/11, my first time at the drags since 1968.
  13. BACNBLAK

    I'm not selling my KB 2.6H!

    Was on the dyno this morning at Pro-Dyno in Fort Mill, SC, they've been tuning my car for 3 years now. Had my current setup retuned and made these numbers on 93 octane @ 20psi (66 degrees, 27% humidity). I don't see the point in switching to a Mammoth, so my 2.6H is no longer for sale.
  14. BACNBLAK

    Greg Biffle's GT500

    Here's Greg Biffle dusting a Ford GT with his Pro-Dyno tuned GT500. Now we know why he gets the big bucks. http://www.carolinarides.com/forum/showthread.php?t=39855
  15. BACNBLAK

    Lower Price!

    I've lowered the price of my KB 2.6H with an ST Motorsports monster intake to $4000 shipped. See here for all the details: http://www.s197forum.com/forum/showthread.php?t=8672 PM me if interested.
  16. BACNBLAK

    Kenne Bell 2.6H with ST Monster Intake

    Kenne Bell 2.6H with ST Motorsports Monster Intake LAST CALL! Looking to sell my Kenne Bell 2.6H with it's monster ST Motorsports intake and Black Diamond 1600cfm TB. This setup made (Nov 08) 670rwhp/613 torque on my built 3V running 93 octane @ 18psi. Shown below is my Sep 07 pull. Here's...
  17. BACNBLAK

    KB Fuel Block already machined for gauge

    Selling a KB fuel pressure block already machined to accept a fuel pressure gauge sender for $30 shipped. PM me if interested.
  18. BACNBLAK

    Street Scenes S197 foglight and taillight bezels

    SOLD! Selling brand new, never used, Street Scenes S197 foglight and taillight bezels for $55 shipped. PM me if interested.
  19. BACNBLAK

    Custom Modded S197 Side window Scoops

    Selling a pair of custom modded S197 side window scoops for $110 shipped. These scoops have had their intakes opened up and have been vented in the rear to allow air and water to escape. I've decided to install Agent 47 NACA duct side scoops instead. They've never been used, have been lightly...
  20. BACNBLAK

    Reichard Racing double bearing 100mm idler

    Selling a Reichard Racing double bearing 100mm idler pulley for $60 shipped. It's in excellent condition, used for a short time in one of my previous setups. PM me if interested.
  21. BACNBLAK

    Pre-Drilled S197 Fuel Pump Hat

    This is a stock Mustang GT fuel hat pre-drilled for AN-6 bulkhead fittings. I have GT500 pumps and thought the stock hat might be interchangeable with the GT500 hat so I went ahead and drilled out the stock fuel fitting and drilled another hole as well. Unfortunately the hole for the electrical...
  22. BACNBLAK

    Pitfalls of Fuel Pump Upgrade

    Just wanted to share what we learned from my recent GT500 fuel pump upgrade to Ford GT pumps. I decided to go the more economical route and update my GT500 fuel hat to twin AN-6 bulkhead fittings and replace the plastic hoses in the basket with Gates 27093 (H209 from NAPA) submersible hose along...
  23. BACNBLAK

    Fuel System Upgrade Complete

    Finished my fuel system upgrade today and will get the car dynoed on Tuesday. We swapped out my GT500 fuel pumps for Ford GT pumps, replaced all fuel lines in the basket with Gates 5/16 submersible hose and installed -6 bulkhead fittings in the hat for each pump. There are -6 braided lines going...
  24. BACNBLAK

    Aeromotive Fuel Rails with KB

    Here's some shots of the progress we made last tonight mounting my shortened (just the drivers side) Aeromotive fuel rails . There's about 1/8" clearance between the end of the rail and the KB bypass actuator. Couldn't go any further, need another foot of submersible hose for the Ford GT fuel...
  25. BACNBLAK

    Thump_rrr Racing KB Snout Brace

    Here's a shot of my Thump_rrr Racing KB snout brace. It takes about 5 minutes to install, fits precisely, and is well made.

Latest posts

Support us!

Support Us - Become A Supporting Member Today!

Click Here For Details

Back
Top