Search results for query: *

  1. Screamin_dutch

    Vibration after diff rebuild

    Neither axle had those weights. It's pretty much vibration free as far as I could try (90mph). But I still get a rumble strip like vibration if I give it some power in 3rd gear and low revs. Also noticed the driveshaft hitting the tunnel on some bumps, probably because of how much nose up the...
  2. Screamin_dutch

    Vibration after diff rebuild

    Update: checked pinion angle. Which was perfect and I figured unchanged since I only swapped axles and pushed a new oem rubber bushing in the diff. I can't get a good reading on the transmission side, everytime its something between 1 and 3 degrees pointing down. The pinion was 2.5 up when I...
  3. Screamin_dutch

    Vibration after diff rebuild

    Ill have to try popping it in neutral tomorrow. So far I did rotate the ds at the pinion 3 times now, cant do 90 degrees with the DSS shaft. Only thing I can try is remove the DSS spacer from the pinion to see if theres any dirt between that.
  4. Screamin_dutch

    Vibration after diff rebuild

    I had a spare axle rebuild by a knowledgable guy who does diff and gearboxes for a living. He did my 95 GT years ago too. Full rebuild with new clutch packs, every bearing new and a fresh set of 3.73s (ford racing). Prior I had a stock axle with 3.55s, all new control arms, new DSS driveshaft...
  5. Screamin_dutch

    2005 GT driveshaft

    Yes thats the one. Another MOCGB member is interested too though, I need to find a box at work monday first. I guess it will fit your car unless saleen used a different gearbox, which they only did on the extreme I think.
  6. Screamin_dutch

    2005 GT driveshaft

    I think youre talking about me :)
  7. Screamin_dutch

    05-09 Carbon Fiber Dash

    Did you take all the panels off?
  8. Screamin_dutch

    05-09 Carbon Fiber Dash

    Wrap it with 3M 1080 vinyl in carbon. Used it in my old E92 and looked very good. I used 3M brushed metal for the mustang because a metal dash was more historically correct imo. PSX_20181123_171026 by Screamin_dutch posted Nov 29, 2018 at 10:04 PMPSX_20181123_170933 by Screamin_dutch posted Nov...
  9. Screamin_dutch

    What have you done to your mustang today?

    With too much time on my hands in this quarantine, I did a full polish and wax.
  10. Screamin_dutch

    What have you done to your mustang today?

    Repainted the splitter because it was fading and also painted the lower bumper.
  11. Screamin_dutch

    Axle Back Questions and Deafening Cabin Noise

    Addind resonators or sounddeadening is all fine and dandy, but not taking away the cause. Get borla, corsa or FRPP axlebacks to begin with.
  12. Screamin_dutch

    New chin spoiler day!

    Looks great, I have the same!
  13. Screamin_dutch

    What have you done to your mustang today?

    Steeda adjustable upper and GT500 lowers and a DSS aluminium driveshaft. Great mods combined, really tighten up the rear end! My stock carrier bearing was pretty shot at just 50k miles.
  14. Screamin_dutch

    New(ish) to group - From UK

    Gotcha :)
  15. Screamin_dutch

    New(ish) to group - From UK

    Great looking car! Question; do you pass the MOT sniffer test with the longtubes and cams? Brenspeed told me that it probably wouldnt pass since my longtubes and highflow cats already put me on the ragged edge of passing.
  16. Screamin_dutch

    Looking for coilovers

    Very happy with my ST XTA coilovers, daily.
  17. Screamin_dutch

    Cat or not?

    I believe the shelby GT came with the GTA muffler, slightly louder then stock. Bullitts had the GTB muffler. Both are good mufflers for someone wanting a mild exhaust with no drone
  18. Screamin_dutch

    Give yourself a Christmas present

    How old and which gen dob intake is that? Why are you getting rid of it?
  19. Screamin_dutch

    Lunati VooDoo #21270700 Camshafts

    This thread is a good read and a wealth of knowledge, as these online boards are supposed to be. Tip of the hat from Europe!
  20. Screamin_dutch

    Preventive maintenance until moving to Europe

    Fuel, air and oil filter, sparkplugs etc are cheap to order from europe. Things get expensive because of tax calculated over value and shipping. So anything big/heavy and/or expensive is worth packing. For instance a $8 filter might be $12 including shipping and tax. No biggie. A $500...
  21. Screamin_dutch

    Preventive maintenance until moving to Europe

    Fuel pump
  22. Screamin_dutch

    pros and cons on removing cats

    The corsa's are raspy because they dont have any packing material, just reflecting baffles that cancel out noise and drone. I added some small resonators to make them less tinny with the longtubes.
  23. Screamin_dutch

    pros and cons on removing cats

    I was running longtubes offroad H and corsa sports and it was stupid loud. Way too much noise for 300hp, I felt like a honda civic driver. Very raspy and metallic sounding. The cats take the edge of the volume, give it more of a deep tone and fixed most rasp. Now it only smells on cold start...
  24. Screamin_dutch

    pros and cons on removing cats

    Raspy and way too loud exhaust, and the smell bothered me at the lights or in traffic. Put my high flows back on after couple weeks.
  25. Screamin_dutch

    Aftermarket Recaro seats?

    Great, thanks for the reply man! Do you have any pictures of them installed? Im pretty short and small, so width will be fine. Is there any way of using spacers to get them a little higher up?

Latest posts

Support us!

Support Us - Become A Supporting Member Today!

Click Here For Details

Sponsor Links

Banner image
Back
Top