Search results for query: *

  1. Bedouin

    Momo Steering Wheel & Hub in ‘08

    Thanks XJCasper, I’ve searched YT pretty hard…only vid I found that was close is TruckandRoll guy with a Momo wheel on an NRG q/r hub, but he didn’t connect the horn. He removed the clockspring & plugged two resistors into the 8-9 & 1-2 slots in the column plug that goes into the clockspring. He...
  2. Bedouin

    Ford Racing strut set up for 2008 Bullitt

    I have the full FRPP package, struts, lowered springs, sway bars, etc that came stock in my ‘08 Shelby & in the Shelby ‘07-08 builds..it’s very good, was designed for track & street & the car feels very planted, but I’m in CA. where roads tend to bd less bumpy. It’s on the firmer & harder side...
  3. Bedouin

    S197 to S550 Steering Wheel Swap - The Complete Edition - Video Series

    Howdy Slonison, I’m hoping you may be able to offer some wisdom..I’m going to try to install a Momo Steering Wheel & Hub in my '08 Shelby and still retain the (Momo) horn, & keep the airbag warning light off. I can do without cruise control & self canceling signals, but I can’t find anything...
  4. Bedouin

    Momo Steering Wheel & Hub in ‘08

    Anyone install a Momo hub & Steering Wheel (or NRG, Sparco, etc) in an ‘05-‘09 and retain the (Momo) horn, & keep the airbag light off? I can do without cruise control & self canceling signals in my ‘08, but I’ve searched for hours & seen nothing definitive about what airbag resistors plug in...
  5. Bedouin

    PCV Valve Part Number??? 2008 GT

    And not all catch cans are created equal in how much oil vapor they trap…there was a great thread in the c6 z06 forums showing a significant captured oil volume btw 10 different catch cans.
  6. Bedouin

    What have you done to your mustang today?

    I had my fill of bonkers fast, track days, etc…& hadn’t tried the s197 platform yet..this Shelby is so beautifully analog..5spd, live axle, bolt-action hurst, etc & that glorious 3 valve howl..I’m still surprised how much I look forward to driving it. But if you’ve never owned a c6 z06 treat...
  7. Bedouin

    What have you done to your mustang today?

    Installed an Elite Engineering catch can i had from my c6 z06..amazingly the 1/4” hole in the strut housing was located perfect to attach its billet mount arm.
  8. Bedouin

    Should I get a tune?

    OP, I can’t offer any input as to why, (ecu learning/adjusting to your mods?) but imho if you’ve matched those mods that leaned it out with more fuel/ign. timing that’s good. It’d also be good if you can find a dyno shop to run it & see your A/F ratios are even in the right range.
  9. Bedouin

    New to the S197 Community What’s Your Favorite Mod?

    In order of enjoyment, Pypes pipe bomb axle backs, Wilwood 6R calipers/pads & 2-pc rotors, SRP heel-toe pedals, Elite Engineering catch can.
  10. Bedouin

    What have you done to your mustang today?

    SRP pedals install on my '08 Shelby went great..but not super easy either. I bought them from LMR & got good advice to remove the entire gas pedal first (3, 10mm nuts & unplug the connector), use masking tape on the brake & clutch to mark holes & get their positions just right..all @ 1/8" in...
  11. Bedouin

    Steering wheel wrap

    I'm out of luck on Mewant making me an all black leather one but without any 10 & 2 o'clock seams, & I'd gladly swap out a Bullit or GT500 wheel if I found one inexpensive enough. I'd like to install a Momo Prototipo or similar NRG, but they seem like far too much hassle with the airbag...
  12. Bedouin

    The PIC WHORE CLUB!!! Knock before you Enter!!!

    Springtime in CA.
  13. Bedouin

    Steering wheel wrap

    Just seeing this reply...& no, your's looks excellent, very nice work, & much tighter/flush seams than a customer pic I'd seen with bulky seams. I'll reach out to Mewant to see if they could make me an all black leather one without any 10 & 2 o'clock seams.
  14. Bedouin

    How Much Does It Weigh?

    Latest weight with Wilwood calipers, 2-pc. rotors, subwoofer removed & a light axle back sys is 3,415 lbs.. Rear seatbelts, h/w & washer fluid are next.
  15. Bedouin

    Want to know engine oil temps

    That SG2 looks good too..I’ll contact them about EOT (inferred) PIDs. I had a couple C6 Z06’s & their oil took far too long to even get close to 170-180* due to their 22”x6” front oil coolers. I want to ensure this 4.6 oil gets properly warm.
  16. Bedouin

    Want to know engine oil temps

    StockishS197, care to elaborate? Dashtronix(?), made a C6 corvette OBD2 plugin that displayed multiple sensor temps in the stock DIC readout that was great info..is there a simple way to get EOT’s from the inferred PID?
  17. Bedouin

    Want to know engine oil temps

    What's a simple/easy way to see engine oil temps in an '08 mustang 4.6L? I want to know when oil is over 160~180* ish & safe for higher rpm's. I don't need exact #'s, just a general idea. These TT gauges work great on motorcycles & I'm looking for a simple place to attach/insert a sensor & get...
  18. Bedouin

    Anyone running the MGW for the tr-3650

    My bone stock ‘08 Shelby (not 500) w the Hurst only has a 2-3rd synchro nip when cold, & only if I’m not deliberate with a no-load, easy shift. Once this TR3650 warms up after a few miles it shifts great everwhere, everytime. Pennzoil Synchromesh helped, but would an MGW also help alleviate a...
  19. Bedouin

    What have you done to your mustang today?

    I’ve an ‘08 Shelby GT (not 500) w 10k miles & I have to assume still with original plugs..would it be wise to pull them out earlier (now) than later & replace with new, rather than delay & as they get more carbon’d up?
  20. Bedouin

    Steering wheel wrap

    Wheelskins makes excellent leather wheel wraps you sew on over the stock wheel/cover, great quality, I've done a few over the decades & they last forever...it's not hard at all either, takes a couple hours. But I wouldn't try one on an S197 wheel as the wheelskins are thick(ish) & the bottom...
  21. Bedouin

    Black on black 2008 GT500 - Source for new stripes?

    An AI search yielded results that Pheonix Graphics had a (the?) contract for the Shelby stripes, at least at Shelby Vegas, I think; https://phoenixgraphix.com/ford/0708sgt.php
  22. Bedouin

    What have you done to your mustang today?

    This new Wilwood bbk is working even better than I’d hoped, & the Cragar extended tip lug nuts allowed for addtl. 1/8” rear spacer plate clearance needed.
  23. Bedouin

    What have you done to your mustang today?

    Installed Wilwood 13.2” BBK front & 12.8” rear promatrix rotors this wkd...lighter..better braking feel..& performance are much improved.
  24. Bedouin

    What have you done to your mustang today?

    Inserted the +|- blades of a Mirrortap..aka blendmount power wire into the dome light wires for my V1. Power is the blue/grey wire, ground is solid black.
  25. Bedouin

    What have you done to your mustang today?

Latest posts

Support us!

Support Us - Become A Supporting Member Today!

Click Here For Details

Back
Top